Which Trailer Spindles Will Take CE Smith Pre-Greased Trailer Hub 13110
Question:
Which spindles would fit this hub? I have a British-made little boat trailer, which needed new wheels. I bought the wheels, but the original hub has too skinny bolts. So I bought the hubs. Now the original spindles are too short. I would like to buy the spindles, but I am not sure which would fit. Can you help me?
asked by: Leszek C
Expert Reply:
The Pre-Greased trailer hub # CE13110 fits on BT8 spindles such as # TRU94FR. The hub uses inner and outer bearing L44643 and a grease seal with inner diameter of 1.249 inches and outer diameter of 1.983 inches. This is exactly what you would find on a BT8 spindle.
Installing a spindle is a precision job that requires a qualified professional to install/weld onto the trailer. If there is an RV dealer with a service center near you, they could probably do the job.
Products Referenced in This Question
BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Trailer Spindles
- Standard Spindle
- 1-1/4 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2500 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- CE Smith
more information >
Continue Researching
- Q&A: Solution for Replacement Hubs on Northern Tool Ultra-Tow 49803 Aluminum Trailer
- Q&A: Can Kodiak Disc Brake Kit Replace TDE46247 Rotors
- Q&A: Stabilizer Jack Recommendation for 4 Corners of Hi-Lo Travel Trailer
- Q&A: Fuse Location for Factory Integrated Brake Controller on a 2011 GMC Sierra
- Article: Trailer Tire Sizing
- Q&A: 13 inch Trailer Tire and Wheel Combos with 4 on 4 Bolt Pattern and 2.8 inch Pilot Hole
- Q&A: What is the Pilot Diameter on a Wheel
- Q&A: Trailer Hub Recommendation for Hub on Trailer with 1-1/16" Spindle Diameter
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: Most Popular Wheel Bearings
- Article: How to Choose the Right Trailer Hitch Class
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Tell the Weight Rating of a Trailer Axle