Ball Mount with 5-1/4 Inch Rise and 1 Inch Diameter Ball Hole for a 2 Inch Trailer Hitch
Question:
I need a ball mount for a class III hitch with a 5.25 inch rise, a 2inch receiver opening and a 1inch ball shank opening. I cant seem to find exactly this. Any suggestions? Thanks
asked by: Tim
Helpful Expert Reply:
Rise or drop doesn't have to be exact. If you can get it within 1 inch you will be just fine. We have # C24WR which has a 5 inch rise and has a 1 inch diameter ball hole.
Or another option is to use # C45336 with bushing # F-2. The bushing acts as a spacer allowing you to use a 1 inch diameter ball shank in a 1-1/4 inch ball hole.
Products Referenced in This Question
Curt Ball Mount for 2" Hitches - 5" Rise, 6" Drop - 8,000 lbs - Aluminum
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Aluminum Shank - Silver
- Drop - 6 Inch
- Rise - 5 Inch
- Fits 2 Inch Hitch
- 8000 lbs GTW
- Class IV
- CURT
more information >
Curt Ball Mount for 2" Hitches - 5" Rise, 6-1/8" Drop - 9-3/8" Long - 10,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 5 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- CURT
more information >
Hitch Ball Bushing - 1-1/4" to 1" - Zinc
- Accessories and Parts
- Trailer Hitch Ball
- Bushing
- 1-1/4 Inch to 1 Inch
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Ball Mount for 2" Hitches - 5" Rise, 6" Drop - 10-1/4" Long - 16K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 5 Inch
- Fits 2 Inch Hitch
- 16000 lbs GTW
- Class IV
- Draw-Tite
more information >
Continue Researching
- Q&A: How to Make Fulton A60 Swinging Coupler Compatible with Disc Brakes
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Hub Face Measurement for Tire Clearance on 3,500 Pound Timbren Axle-Less Trailer Suspension System
- Q&A: What is the Correct Replacement Converter for Parrallax 7300 Model 7355 Converter
- Q&A: Can a Trailer Ride With the Tongue at an Upward or Downward Angle
- Q&A: What Size Studs Will the Replacement 13" Rotor for Dexter Disc Brakes Work With
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Q&A: Recommended Ball Mount With 5-1/2 Inch Rise For 2-Inch Hitch
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Height of Curt C82KR, C29FR and C40047 RockerBall Trailer Balls
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub