Which Spindle Goes with Dexter Trailer Hub Assembly - 3,500-lb Axles - 5 on 4-1/2 - E-Z Lube

Question

Question:

Hi, I am building my own axle for a piece of equipment and am looking at this hub assembly to use 84545UC1-EZ , can you tell me which spindle I need to get to go with this?

asked by: Kevin P

0

Expert Reply:

Yes for the EZ lube hub # 84545UC1-EZ you will need EZ lube spindle # TRU74FR . I have linked video reviews of both the hub and the spindle for you.

expert reply by: Michael H

0

Answer 1

For your 2105 EZ Loader TA102B boat trailer I am going to recommend upgrading to stainless steel parts to help ensure less corrosion and a longer life. First is the Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Stainless Steel #KH84545S.…

view full answer...

Answer 2

The hub you referenced, Dexter 3500-lb 5-on-5 Trailer Hub #84550BX, which comes with inner/outer bearings #L68149 and #L44649, is indeed a correct fit for the Number 84 Spindle, part #TRU84FR .

view full answer...

Answer 3

The Trailer Hub Assembly #84550BX that you referenced will use #L68149 as the inner bearing and #L44649 as the outer bearing. These are the inner and outer bearings used by a #84 spindle. We offer the following spindles: #84 Spindle for 3,500-lb…

view full answer...

Answer 4

In most cases, a 3,700 lb axle will use the same bearings and seal as a 3,500 lb axle which means you can use any hub for a 3,500 lb axle on a 3,700 lb axle. The bearings for a 3,500 lb axle are L68149 for the inner, L44649 for the outer, and the…

view full answer...

Answer 5

Having a 1.25 spindle, it can be a few bearings that will fit. However, there will not be a hub that uses both an inner and outer bearing of this size. With that said, I highly recommend replacing your axles with something that will use a more common…

view full answer...

Answer 6

The Dexter 8-248 is a 3500 lb idler hub which uses the L44649 outer/L68149 inner bearing and a 10-19 grease seal. The bearings cross reference to the A4 and A17 bearings you mentioned and the 10-19 seal cross references to the 171255 seal. For…

view full answer...

Answer 7

The Dexter 8-283 is an obsolete 2800lb 10 x 1-1/2 inch hub that used a LM67048 inner and a L44649 outer bearing. Unfortunately, we don't have any hubs that would be compatible with the spindles on your axle. Your best bet at this point would be…

view full answer...

Answer 8

The correct lug nut torque range for any given trailer depends on several factors include the lug diameter, lug nut type and wheel material. Please refer to the linked chart that shows the usual recommended torque range for a variety of combinations.…

view full answer...

Answer 9

I have another option for you, but we do not offer the Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 #84545BX you were looking at pre-greased and assembled. The reason for this is the pre-greased and assembled hubs come that way from the manufacturer…

view full answer...

Answer 10

In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your…

view full answer...

Answer 11

Most likely you would be able to remove the 5 on 5 inch hub of your trailer axle and replace it with the part #84545UC1-EZ but you are going to need to verify that this hub will fit your spindle. In order to do that you can either get the inner and…

view full answer...

Answer 12

In order to determine the correct replacement hubs for your trailer I will need to know the inner and outer bearing numbers stamped into the sides of the bearings. If the axle has a grease zerk fitting at the end then it is an EZ lube axle. If there…

view full answer...

Which Spindle Goes with Dexter Trailer Hub Assembly - 3,500-lb Axles - 5 on 4-1/2 - E-Z Lube

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching