Does the Titan Coupler Part T4845000 have the 50 Millimeter Engraved on the Coupler

Question

Question:

hi! i would like to ask you if it is printed stamped on the coupler that fits with 50mm ball did you have other brand that works also with a 50 mm ball? 3-inch channel width rating 3500lbs min Titan Zinc-Plated, Leverlock Coupler - Adjustable Ball - 3inch Channel - Bolt On - 5,000 lbs Titan Trailer Coupler Code: T4845000

asked by: Marios D

0

Expert Reply:

Yes, the Titan coupler # T4845000 will have the 50mm engraved on the topside. It also fits 1-7/8 and 2-inch hitch balls. I went to our warehouse to take a picture for you too.

Other brands that have a weight capacity of 3,500 pounds and work with a 50 mm ball (1.96 inches) is the Fulton Fas-Lok # F223000301 and Dutton-Lainson channel tongue # DL13800.

The 5,000 pound capacity couplers that work with a 50 mm ball (1.96 inches) is the Fulton Fas-Lok # F343000301, Titan # T4845000, # T2343400183 and # T2343400, and the Dutton-Lainson # DL13897.

I also included a informative article about trailer couplers too.

expert reply by: Chris B

0

click to enlarge

Answer 1

Since your tow vehicle has a non-detachable hitch ball you are going to have to look into a different coupler. The only couplers we have for a 50mm ball is a Multi-Fit like the Dexter #T2343400. This particular coupler does bolt to a 3" pole…

view full answer...

Answer 2

You may be experiencing some wear in the suspension components that can cause tire wear and also be a symptom or cause the axle to be misaligned. Inspect your suspension components and if any of the holes where hardware goes is egg-shaped, that…

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 6

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 7

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 8

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 9

The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…

view full answer...

Answer 12

A 4-way trailer connector will have four functions which means it will also have four wires for the exception of wishbone harnesses. These four functions are ground, tail light, right turn, and left turn. The ground function will usually be…

view full answer...

Does the Titan Coupler Part T4845000 have the 50 Millimeter Engraved on the Coupler

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching