Kia Sorento 2012 LX Trailer Wiring Harness Recommendation
Question:
I ordered trailer light harness 118269 which did not match the connector in my Kia 2012 Sorento LX. I just find out another harness from your website 118258 has the same connector type as my Kia sorento 2012 LX after I compare the picture. Could you check the picture I took and let me know if 118258 is the right type? If so, could you help me to exchange it. If not could you help me to find the matched one? Please check the attached pictures and confirm that if you have the right one for it.
asked by: Hanzhong F
Expert Reply:
The Curt Wiring harness part # C56332 that you referenced has been confirmed to fit the 2012 Kia Sorento that have the factory tow package. If you attempted to install it and it did not function most likely that is due to your vehicle not having the tow package or that your vehicle has missing tow package fuses/relays. You can also check that you have a fuse installed in the fuse holder of the harness.
Otherwise, you would need to use the harness part # 118506. This harness will plug inline with your vehicle taillights and will work for your vehicle. I attached an install video for you to check out as well.
The # 118258 that you also referenced is for a different year Sorento than what you have so I cannot recommend it for you.
Products Referenced in This Question
T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacement for Gabriel Shock Model 610712
- Article: How to Measure a Trailer Axle
- Q&A: Taillight Converter Needed To Separate Brake Lamp and Turn Signal Circuits
- Q&A: Recommended Replacement For A JVR9000R RV Stereo System With Three Cameras
- Q&A: Option to Replace Jensen JRV9000R
- Q&A: 40' Wishbone Trailer Wiring With A Ground Wire Running Down Both Sides
- Q&A: How To Convert A Wishbone Trailer Wiring Harness To A Regular 4-Flat Trailer Wiring Harness
- Q&A: Can 2007 Hyundai Santa Fe Without Trailer Tow Package Tow a Camper?
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller Installation: Starting from Scratch
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Nissan Tow Package Wiring Harness 118266/118267 - 7 Way Harness Installed and Electric Brakes Locked
- Article: How to Mount a Truck Bed Camper