Repair Kit Recommendation for a Roadmaster Falcon 5250 Tow Bar

Question

Question:

I have already incorrectly ordered 910003-50 and 910003-60 for my falcon 5250. As I will now order the -55 kit, will the bushing size be correct?

asked by: Effan

0

Expert Reply:

The Compete Repair Kit for Roadmaster Falcon Towbar 5250 # RM-910003-55 that you referenced is confirmed to fit your Falcon 5250 tow bar so the included bushing would be the correct size for you tow bar.

expert reply by: Jameson C

0

Answer 1

Roadmaster Recommends that you use a dry silicone lubricant on the retractable arms of the RoadMaster Falcon 2 Tow Bar #RM-520. The reason for this is because a dry lubricant will not attract dirt like a wet one.

view full answer...

Answer 2

If a tow bar isn't sitting with the accepted level range you will have a few issues. You will wear out the front suspension of the towed vehicle and you will wear out the front tires of the vehicle being towed. Also, tow bars eventually will…

view full answer...

Answer 3

I assume you are talking about the Falcon 2, #RM-520, and the Falcon All-Terrain, #RM-522, since the original Falcon tow bar has been discontinued for a while. If you find yourself in situations where you can't bet lined up straight with the…

view full answer...

Answer 4

Per the manufacturer when installing the Roadmaster 9700 braking system the black and white wires are for the breakaway connection. The green wire will then take the brake signal wires from the lighting kit and will use it as an activation for the…

view full answer...

Answer 5

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 6

Whether or not you can flat tow with a Jeep bumper is really up to the manufacturers testing; some of the big names like MetalCloak or Poison Spyder have bumpers with D-ring attachments that can be used for flat towing connections. This is great…

view full answer...

Answer 7

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Gladly! The difference between the Blue Ox Patriot 3 Radio Frequency, Portable Braking System BRK2019 and the Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR is that the Blue Ox Patriot 3 RBRK2019 is older, no longer available, and…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 12

Hey Michael, The Falcon 5250 has direct-connect attachment points that hook onto a crossbar, if you remove the crossbar adapter then you'll be able to go with a direct-connect baseplate like the #RM77ZR (models with tow hooks) or #RM76RR (models…

view full answer...

Repair Kit Recommendation for a Roadmaster Falcon 5250 Tow Bar

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching