Plastic Fender Recommendation for a Trailer with 8 inch Wheels That Burned Down
Question:
Rebuilding a trailer burned in a fire. It had plastic fenders that bolted directly to the trailer frame on the back vertical flange of the fender. They had about 2inch square stiffener plates under the bolt heads where they attached. The bolt holes on the frame are 12inch apart. 8inch wheels....
asked by: Bruce
Expert Reply:
Sorry to hear about your old trailer burning down. For a plastic fender that you could use for your trailer the Fulton Fender part # F008559 would be a great choice. You said that your previous fender bolted to a vertical flange on the side of the trailer frame, this fender has a vertical side on it that will allow holes to be drilled through it and mounting hardware inserted through it.
I attached a review video for this fender for you to check out as well.
Products Referenced in This Question
Single Axle Trailer Fender w Top Step - Style B - Black Plastic - 8" to 12" Wheels - Qty 1
- Trailer Fenders
- Top Step
- 10 Inch Wheels
- 12 Inch Wheels
- 8 Inch Wheels
- 7 Inch Wide
- 22 Inch Long
- Plastic
- Bolt-On
- For Single-Axle Trailers
- Black
- Fulton
more information >
Product Page this Question was Asked From
Single Axle Trailer Fender w Top Step - Style C - White Plastic - 8" to 12" Wheels - Qty 1
- Trailer Fenders
- Top Step
- 10 Inch Wheels
- 12 Inch Wheels
- 8 Inch Wheels
- 7 Inch Wide
- 21-1/2 Inch Long
- Plastic
- Bolt-On
- For Single-Axle Trailers
- White
- Fulton
more information >
Continue Researching
- Search Results: fenders
- Shop: Single Axle Trailer Fender w Top Step - Style C - Black Plastic - 8" to 12" Wheels - Qty 1
- Shop: Single Axle Trailer Fender w Top Step - Style B - Black Plastic - 8" to 12" Wheels - Qty 1
- Shop: Mounting Bracket for Trailer Fender - 8" and 12" Wheels - Galvanized Steel - Qty 1
- Q&A: Replacement Fender for Yacht Club Jet Ski Trailer Measuring 20.5 Inches Between Mounting Holes
- Q&A: Why Is 5th Wheel Trailer Clunking When Starting/Stopping with B&W Companion and MORryde Pin Box
- Search Results: 44649
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Hitch
- Shop: Tandem Axle Teardrop Trailer Fenders - Rounded Edges - Steel - 15" to 16" Wheels - Qty 2
- Search Results: dust cap
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Q&A: Troubleshooting A Clunking Noise Between A Fifth Wheel Hitch And Base Rails While Towing
- Shop: Single Axle Trailer Fender w/ Backing Plate - Steel - 14" to 15" Wheels - Qty 1
- Video: Flex-a-lite Transmission Coolers Manufacturer Demo
- Q&A: Trailer Hitch for a 2015 Honda Pilot
- Search Results: dust caps
- Shop: Brake Controller
- Shop: Tandem Axle Teardrop Trailer Fenders - Rounded Edges - Steel - 14" to 15" Wheels - Qty 2
- Video: Curt Fifth Wheel Rail Sound Dampeners Review
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: Dexter Axle Trailer Brakes 23-26 Review
- Shop: Tandem Axle Teardrop Trailer Fenders for Enclosed Trailers - 14" to 15" Wheels - Qty 2
- Q&A: Parts Needed to Tow a Trailer with a 2015 Honda Pilot
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Fifth Wheel Hitch
- Search Results: 25580
- Q&A: Installation of Hitch on Fifth Wheel Trailer
- Article: Trailer Tire Sizing