Availability of Pre-Drilled Continuous Hinge That Measures 3-Inches Wide x 68-Inches Long

Question

Question:

I need 2 3inch x 68inch hinges that are pre drilled can you help. it needs to hold a door that will hold 150 lbs

asked by: LynJa J

0

Expert Reply:

The Redline replacement hinge you referenced, part # H300, measures 3- x 72-inches but is not pre-drilled. This is because this part is designed for multiple installation methods - by welding or by use of fasteners you supply. We also offer a stainless steel version, part # SH300. These hinges do not carry a specific weight capacity since that will depend on the strength of the surface they mount on. For a 150-lb door I recommend the stainless steel hinge # SH300.

This hinge can be cut to length but we do not do that here.

You will want to use stainless steel fasteners also, such as # 1172904.

expert reply by: Adam R

0

Answer 1

The #H300 is a 6 foot long piano hinge. It would work well for you to use as a hinge for a fold down trailer ramp. If needed, you could cut the hinge down shorter. We have several customer reviews left for this product that mention how well it…

view full answer...

Answer 2

Determining between piano hinges, #H300 3 Inch Wide Steel 6 Ft Long or #SH200 2 Inch Wide Stainless Steel Hinge 6 Ft Long, depends what features you find more important for your application. The #H300 hinge will be stronger in that it is an inch…

view full answer...

Answer 3

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

The proper replacement inner assembly member for your UFP 34043 would be indeed be the the Dexter #DX99FR which is compatible with disc brakes. The replacement has an electric lock out and has a 7500K capacity and is intended to work with a 2 inch…

view full answer...

Answer 10

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 11

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 12

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Availability of Pre-Drilled Continuous Hinge That Measures 3-Inches Wide x 68-Inches Long

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching