Will Curt Q24 Fifth Wheel Hitch Work With Curt X-5 Adapter
Question:
Will the curt X5 work with the curt Q24 5th wheel hitch, I relize it is over the weight rating I would like to buy the Q24 to just have the ability of height adjustment not the weight rating. Thanks
asked by: Steve
Expert Reply:
The Curt X-5 Fifth Wheel Adapter, part # 16310 is designed to fit B And W Square Shank Turnover Ball Hitches. If you have the B And W installed in your vehicle, the X5 will work well for you. The weight capacity of this adapter is 20,000 lbs.
If you have the Curt Double-Lock, Flip and Store gooseneck hitch, you would use the Curt X-5 Adapter, part # C16210. If you have a Curt EZr Double-Lock gooseneck hitch, the adapter you need is part # C16220.
The Curt Q24 5th Wheel Trailer Hitch, part # C16245, will work with industry-standard above bed rails. This will work with the X-5 rails. Any time you are towing you must use the lowest rated component when considering towing capacity.
Products Referenced in This Question
Curt X5 5th Wheel Base Rails Adapter for B&W Turnoverball Gooseneck Trailer Hitches - 20,000 lbs
- Gooseneck and Fifth Wheel Adapters
- Adapts Truck
- Gooseneck Hitch to Fifth Wheel Trailer
- No Offset
- 20000 lbs GTW
- Connects to Gooseneck Hole
- Fixed Height
- Hitch Adapters
- CURT
more information >
Curt X5 5th-Wheel Base Rail Adapter Plate for EZr Double Lock Gooseneck Trailer Hitch
- Gooseneck and Fifth Wheel Adapters
- Adapts Truck
- Gooseneck Hitch to Fifth Wheel Trailer
- No Offset
- 20000 lbs GTW
- Connects to Gooseneck Hole
- Fixed Height
- Hitch Adapters
- CURT
more information >
Curt Q24 5th Wheel Trailer Hitch - Dual Jaw - 24,000 lbs
- Fifth Wheel Hitch
- Fixed Fifth Wheel
- Above Bed Rails
- 6000 lbs Vertical Load
- 24000 lbs GTW
- Cushioned 360-Degree
- Standard - Double Jaw
- 13 - 17 Inch Tall
- CURT
more information >
Product Page this Question was Asked From
Curt X5 5th Wheel Base Rails Adapter for Curt Double Lock Gooseneck Trailer Hitches - 20,000 lbs
- Gooseneck and Fifth Wheel Adapters
- Adapts Truck
- Gooseneck Hitch to Fifth Wheel Trailer
- No Offset
- 20000 lbs GTW
- Connects to Gooseneck Hole
- Fixed Height
- Hitch Adapters
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Gooseneck to 5th Wheel Adapters
- Article: Adapters for Towing a 5th Wheel Trailer with a Gooseneck Hitch
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: 5th Wheel to Gooseneck Adapters
- Article: Gooseneck Trailer Hitch Information and Review
- Article: Best 5th Wheel to Gooseneck Adapters (2023)
- Article: Ram Trailer Tow Prep Package
- Q&A: Adding a 7-Way Trailer Connector on a 1995 Ford F-250 with No Existing Trailer Wiring
- Q&A: Are B and W Companion and Patriot Heads Interchangeable
- Q&A: Replacement Gearbox to Attach Landing Gear Motor on 2009 Carriage Cameo
- Q&A: Replacement Hitch Connector Assembly For Blue Ox Ascent or Avail Tow Bars
- Q&A: Replacement Bearings for Dexter 8-222 Hub
- Q&A: Comparing the Curt Q20 and the Curt A20 5th Wheel Hitches.
- Q&A: Recommended Replacement Stereo for Touch Audio VD-300i