Compatible 6 Lug on 5-1/2 Inch Bolt Pattern Idler Hub and Total Drop of Timbren Axle-Less Suspension
Question:
Which idler hub with a 6 on 5.5 pattern do I use with this axle? And whats the distance from the trailer frame to the center of the spindle with this model specifically as it obviously has the 4inch lift plus the arm to the spindle. Thanks!
asked by: Matthew
Expert Reply:
We do have an idler hub with a 6 lug on 5-1/2 inch bolt circle that's compatible with the Timbren # ASR2KHDS03 Axle-less suspension, the part number of the hub is # 84655UC1-EZ, they are sold individually.
The drop of the spindle, measured from the underside of the trailer frame to the center of the spindle is 7-1/2 inches. This includes the lift plus the spindle drop.
I've provided you with a diagram we received from Timbren that shows all the relevant dimensions for you.
![Mike L](https://images.etrailer.com/static/images/catg/people/166_tn.jpg)
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Recommendation for Converting Fleetwood Neon Pop-Up to Axle-Less Suspension System with Jeep Tires
- Q&A: Can Brakes Be Added to the 2K Timbren Axle-Less Trailer Suspension System
- Q&A: Adding Crossbars To A Teardrop Trailer
- Q&A: Can Oil Bath Hubs be Converted to Grease Hubs
- Q&A: Timbren Axle-Less System With 2,200 lb Capacity Compatibility With Dexter Brake and Hubs K71-511-00
- Q&A: Will Brake Assembly with 5-Bolt Mounting Pattern Fit 4-Bolt Mounting Pattern
- Q&A: What Welding is Required to Install Timbren Trailer Suspension Enhancement System
- Article: Pintle-Hitches
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Where to Position the Trailer Axle?
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Trailer Lighting Requirements
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Wiring Diagrams