Will Dexter Hub and Drum Assembly 84546UC3 Fit a Dexter 2,500 Pound Axle
Question:
This is a follow up to a previously asked question. I have checked for the bearing #s on my Dexter axle but they are not legible. I measured them and the outside bearings ID is 1 1/16. The inside bearings ID is 1 3/8. The hubs you have for the 2500Lb axle are two of the same size bearings, so I know that wont work. I believe these drums may be the correct ones but I cant find an ID measurements for the bearings or anything else that assures me of my guess. Any help would be appreciated. Thank you,
asked by: Mark B
Expert Reply:
The bearings included with the Dexter 3,500 pound hub and drum assembly you are looking at are inner bearing L68149 and outer bearing L44649.
The inner diameter of L68149 is 1.378 inches. The inside diameter of L44649 is 1.063 inches. These measurements are close to but not the same as 1-3/8 inches or 1-1/16 inches. To measure bearings properly you will need a more precise tool for measuring like a dial caliper.
Part # 84546UC3 appears to be the right hub and bearing kit using your measurements. I checked with my Dexter contact and these hubs are used on several different Dexter axles, not just their 3,500 pound axles so there is a good chance that this is the right part, but in order to be 100 percent sure, you will need either bearing numbers or exact measurements on the bearings.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Trailer Hub and Drum Assembly - 3,500-lb E-Z Lube Axles - 10" - 5 on 4-1/2 - Galvanized
- Shop: Vesper Steel Modular Trailer Wheel - 13" x 4-1/2" Rim - 5 on 4-1/2 - Silver
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 5-1/2
- Video: Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 8-247-50UC3-EZ Review
- Search Results: akebrk~35~sa
- Search Results: 10 inch brakes and hub
- Search Results: trailer brakes
- Q&A: How to Add Brakes to a Shorelander Boat Trailer
- Q&A: How To Determine Left Side From Right Side When Installing Axles With Brakes Installed
- Q&A: How To Determine What is Needed To Add Electric Brakes To Enclosed Trailer
- Q&A: How to Choose the Correct Brake Assembly for Trailer Axles
- Q&A: Does the Dexter Trailer Hub and Drum Assembly # 84546UC3 Come Fully Assembled
- Q&A: Determining if Dexter Trailer Brake Assemblies # 23-26-27 Fit 1995 Shorelandr Trailer
- Q&A: Parts Needed to Add Electric Brakes to a Utility Trailer with a 3500 Lbs Axle and Brake Flanges
- Shop: Brake Controller
- Search Results: 44649
- Video: Choosing the Right Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Search Results: 25580
- Video: Choosing the Right Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Suspension Enhancement
- Search Results: 68149