How to Install a Multi-Fit Motor Home Trailer Hitch on a 5th Wheel Travel Trailer with I-Beam Frame
Question:
Will this hitch work with my I frame 5th wheel? I like this design over the other option you offer but want to make sure attaching it to my I frame via bolts or welding would be acceptable. Also what is the total from the frame mounting location? I do not see any dimensions showing how low this hitch will hang when attached to the trailer.
asked by: Barry M
Helpful Expert Reply:
I recommend the Curt hitch part number # 13703. With this hitch you would be able to install the brackets on the inside of the I-beam frame and would have 6 bolts holding it in place providing a much larger mounting surface than the other hitch. It is rated for 350 pound tongue weight and 3,500 pounds gross trailer weight.
The dimensions of the Curt hitch # 13703 are:
Width of the brackets is 12 inches.
Height of the brackets is 12-7/8 inches.
Actual length of the main tube is 68-1/2 inches.
Height from top of bracket receiver to the bend (where it mounts up) is 3-3/8 inches.
You will also want to check the owners manual on your 5th wheel to make sure you can install a trailer hitch and for the trailer's capacities.
Product Page this Question was Asked From
Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide
- RV and Camper Hitch
- Frame Mount Hitch
- 22 - 72 Inch Wide Frame
- 350 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Bolt-On
- Weld-On
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Will the Draw-Tite Trailer Hitch Fit a 2022 Volvo XC90 Recharge
- Article: Trailer Wiring Diagrams
- Q&A: Typical Trailer Suspension Hanger Spacing Relative to Leaf Spring Size
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Q&A: Best Upgrade for Dometic 310 Part-Timer RV Toilet
- Q&A: How To Connect A Dometic 310 RV Toilet To A Supply Line That's Too Far Away
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Q&A: Replacement Lift Motor for Fantastic Vent in 2002 Teton 5th-Wheel Trailer
- Q&A: How To Activate 12V Trailer Charge Circuit On 2019 Ford Super Duty With Factory 7-Way
- Article: 2023 Best Gifts for Outdoor Enthusiasts
- Article: How Harvest Hosts Is Becoming the New Standard of the Camping Industry
- Article: How to Replace or Install an RV Roof Vent