Gauge of Metal Westin Fey Diamondstep Bumper # 21000-92230 is Constructed of

Question

Question:

need to know the gauge on this bumper

asked by: Patti

1

Helpful Expert Reply:

My Westin representative tells me that their Fey Diamondstep Bumper you referenced, part # 21000-92230 is constructed of 12 gauge chrome plated steel. The bumper includes mounting brackets and hardware that are compatible with the 1973-1991 Chevy C/K series trucks, 1967-1997 Ford trucks and 1972-1993 Dodge trucks.

expert reply by: Mike L

1

Answer 1

The length of the Westin Fey Diamondstep Rear Bumper #71000 is 61-1/2" and the depth is right around 7". I confirmed this with my contact at Westin.

view full answer...

Answer 2

The overall length of the Westin bumper part #21000-92230 that you referenced is 74-1/4 inches.

view full answer...

Answer 3

We do have a video that will help. We didn't get any footage of the #21000-92230 chrome bumper being installed but we do have a video showing the black powder coated version being installed on a 1986 C/K Series. The install procedure would be…

view full answer...

Answer 4

For your 1977 Chevrolet C/K Fleetside Pickup you need the Westin Fey Diamondstep Rear Bumper with Custom Installation Kit #21000-92230. This bumper measures 74-1/2" wide. The Bumper #71000 you found is for narrower Mitsubishi and Toyota…

view full answer...

Answer 5

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 10

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Gauge of Metal Westin Fey Diamondstep Bumper # 21000-92230 is Constructed of

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching