Filter Products
Filter Results
$25.12 - $30.63
$5.46 - $28.69
$6.41 - $299.95
Filter by Bulb Type
$25.12 - $30.63
$5.46 - $28.69
$6.41 - $299.95
Videos
for Work Lights
Help Articles
for Work Lights
Expert Answers
for Work Lights
For the Tecnic 45 degree accent light part #TN42FR the correct mounting cover is the part #TN34FR.
view full answer...The Opti-Brite LED Work Light #TLL60FB is a 2-wire light with black being power and white being ground. It will wire in to your trailer's existing wiring. As long as the current lights run on 12, 24, or 36 volt DC this light is compatible.
view full answer...We do have some options similar to the Optronics Halogen Utility Light #QH16CTS but a little smaller: - Vision X Utility Market Floodlight #XIL-UF32 (456 lumens and measuring 3-1/2" long x 1-7/8" tall x 7/8" deep) -…
view full answer...The Transcom #TCM 21344 TB cross references to the 10-10 seal we offer, part #RG06-090. The seal has a 2.125 inch ID and a 3.376 OD. It's compatible with a 25580 inner bearing.
view full answer...The C-Channel for Enclosed Trailer #362213-955 has an opening of 1.027". I have included an image below with all the dimensions for this item.
view full answer...The USB Outlet with Waterproof Cap #DG61USBVP requires a 1-1/8" depth without the cap. The cap for the face has a ring that slides onto the shaft and is approximately 5/16" thick. If you plan on using the cap then the ring portion of it…
view full answer...In order to wire your cargo trailer for both 12 volt DC and 110 volt AC power you would need to install a AC/DC distribution panel and power converter which we currently do not offer. You would then wire the 12 volt power to the converter along with…
view full answer...The Exterior LED Utility Light part #M337FR has three wires, one for power, one for ground, and one for neutral. I spoke with M-3 and they informed me that the light follows EU Wiring Specifications so the power should be brown, the neutral should be…
view full answer...Yes, because it is a 3-wire light, you can wire the Red Identification Light Bar with White LED Utility Light #OPT88FR to function as rear marker and reverse lights.
view full answer...The Fusion LED Combination Tail Light Bar #STL264RCB appears to be the closest light we have to your current red stick light. This has the same clear lens with red LED's. It is 20-1/2" long versus the 17" light you have. We do have a…
view full answer...If I understand you correct you have a trailer with separate turn signals and brake lights that aren't functioning properly because you 2013 Ford F-150's trailer wiring combines those signals on one circuit. If I'm wrong let me know. If…
view full answer...I reached out to my contact at Diamond and she said that the USB Outlet #DG61USBVP has a 2.1 amp max rating. I have attached a short video review that you can check out as well.
view full answer...Videos
for Work Lights
Help Articles
for Work Lights
Expert Answers
for Work Lights
For the Tecnic 45 degree accent light part #TN42FR the correct mounting cover is the part #TN34FR.
view full answer...The Opti-Brite LED Work Light #TLL60FB is a 2-wire light with black being power and white being ground. It will wire in to your trailer's existing wiring. As long as the current lights run on 12, 24, or 36 volt DC this light is…
view full answer...We do have some options similar to the Optronics Halogen Utility Light #QH16CTS but a little smaller: - Vision X Utility Market Floodlight #XIL-UF32 (456 lumens and measuring 3-1/2" long x 1-7/8" tall x 7/8"…
view full answer...The Transcom #TCM 21344 TB cross references to the 10-10 seal we offer, part #RG06-090. The seal has a 2.125 inch ID and a 3.376 OD. It's compatible with a 25580 inner bearing.
view full answer...The C-Channel for Enclosed Trailer #362213-955 has an opening of 1.027". I have included an image below with all the dimensions for this item.
view full answer...The USB Outlet with Waterproof Cap #DG61USBVP requires a 1-1/8" depth without the cap. The cap for the face has a ring that slides onto the shaft and is approximately 5/16" thick. If you plan on using the cap then the ring portion…
view full answer...In order to wire your cargo trailer for both 12 volt DC and 110 volt AC power you would need to install a AC/DC distribution panel and power converter which we currently do not offer. You would then wire the 12 volt power to the converter along…
view full answer...The Exterior LED Utility Light part #M337FR has three wires, one for power, one for ground, and one for neutral. I spoke with M-3 and they informed me that the light follows EU Wiring Specifications so the power should be brown, the neutral should…
view full answer...Yes, because it is a 3-wire light, you can wire the Red Identification Light Bar with White LED Utility Light #OPT88FR to function as rear marker and reverse lights.
view full answer...The Fusion LED Combination Tail Light Bar #STL264RCB appears to be the closest light we have to your current red stick light. This has the same clear lens with red LED's. It is 20-1/2" long versus the 17" light you have. We…
view full answer...If I understand you correct you have a trailer with separate turn signals and brake lights that aren't functioning properly because you 2013 Ford F-150's trailer wiring combines those signals on one circuit. If I'm wrong let…
view full answer...I reached out to my contact at Diamond and she said that the USB Outlet #DG61USBVP has a 2.1 amp max rating. I have attached a short video review that you can check out as well.
view full answer...