Filter Products
Filter Results
$16.34 - $27.27
$16.34 - $27.27
Filter by Style
Videos
for Wheel Chocks
Help Articles
for Wheel Chocks
Expert Answers
for Wheel Chocks
I checked with Erickson and their Removable Motorcycle Wheel Chock item #EM07506 does not have a weight rating. It is made of steel and works with bikes that have up to 6" tires. So long as your Honda and Kawasaki do not have wider tires…
view full answer...David, it sounds like you're looking for the K-Source Snap & Zap Custom Towing Mirrors #KS80900. As long as your Sierra does not have chrome caps or telescoping side mirrors, these'll work perfect for you. If you have any…
view full answer...The measurement you're referring to for the Erickson Removable Motorcycle Wheel Chock #EM07506 is 8". This wheel chock has overall measurements of 11-3/4" long x 8-1/4" wide x 8-1/2" tall and will fit tires…
view full answer...To activate the brakes on a trailer with your 2024 Toyota Grand Highlander you'll need a 7-way connector and brake controller. To switch over from your 4-pin connector you can install the #ETBC7L. This will plug into your 4-pole connector…
view full answer...I recommend installing the Thule WingBar Evo roof rack on your 2024 Toyota Camry. I prefer this roof rack as the crossbars use a 2 piece channel seal which makes it easy to slide in a Kayak Carrier #LR28FR. You will need the Crossbars #TH711420, Feet…
view full answer...The Transcom #TCM 21344 TB cross references to the 10-10 seal we offer, part #RG06-090. The seal has a 2.125 inch ID and a 3.376 OD. It's compatible with a 25580 inner bearing.
view full answer...Hey Linda, we have the Stromberg Carlson Wheel Chocks part #SC47MR which will work great for you. These can fit wheel spacings between 2 inches and 17 inches.
view full answer...If the trailer is less than 1 inch off of being perfectly level either up or down then it will be perfectly fine. Having it slightly higher would be better because presumably the tongue weight of the trailer will pull it down a little. You could also…
view full answer...The Waste Master RV Sewer Hose w/ Camlock Fittings, Nozzle, and Endcap - 18' Long #LC360781 is not designed to be stored in your bumper. The permanent attachment to the hose will not allow for that. If you want something similar that will allow…
view full answer...The SilverBack RV Sewer Hose part #D04-0650 can be shortened but the bayonet style fittings will not properly fit the hose anymore since the hose is designed with the fittings preglued to the ends of the hoses. I confirmed this with SilverBack. They…
view full answer...The channel of the Demco 21K #DM16080-52 coupler is 3 inches deep. The distance from the center of where the trailer ball would sit to the first 5/8 inch hole is 7 inches, and 12 inches to the second hole. The Titan #T4853100 dimensions are a little…
view full answer...Hey Charles, so the reason the RV Bumper Bike part #S80605 that you referenced requires 2 inches between the bottom of the trailer body and the top of the bumper is to clear the mounting hardware. So if you are sure you don't have that clearance…
view full answer...