Videos
for Tree Saver Straps
Help Articles
for Tree Saver Straps
Expert Answers
for Tree Saver Straps
If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…
view full answer...If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106…
view full answer...Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side.…
view full answer...Lippert does not recommend using ATF Type F Fluid as it is not compatible with Lippert hydraulic system #LC251910 seals because they will not work properly. The following automatic transmission fluid (ATF) recommendations for use in Lippert…
view full answer...I've checked with Lippert in the past and for their hydraulic leveling systems they recommend Dexron III or Mercon 5 automatic transmission fluid.
view full answer...When replacing the electric winch on your 2007 Rockwood popup camper, you want to look at the weight rating and mounting-plate bolt pattern of your current winch along with the dimensions to ensure fitment. It looks like the Superwinch LT3000 ATV…
view full answer...The Talon Series Winch, #SW1612201, that you referenced is a large winch and may be overkill for your truck. The Talon winches are high-performance recovery winches that they will have a faster line pull, an adjustable clutch, an upgraded remote and…
view full answer...If you look at the backs of the brake assemblies there should be a hole where the magnet wires come out and a little opaque plastic strap. So if you are looking at the back of the assembly and those items are on the left then it is the left side…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…
view full answer...Westin has a Grate Step Nerf Bar kit that fits your 2010 Dodge Ram 2500 Crew Cab with the part #27-74765-1905 which comes with all of the needed install hardware and is a confirmed fit for your truck. You wouldn't have to worry about this not…
view full answer...First you would need an engine oil cooler kit. I recommend #D15502 because it comes with multiple thread types and has the proper O-ring size for a V-6 Toyota motor. The sandwich adapter included is thermostatic so a separate thermostat is not…
view full answer...The HydraStar Electric Over Hydraulic Actuator part #HBA16 has a 12 oz. fluid capacity and the Dexter DX Series Electric Over Hydraulic Brake Actuator part #K71-651 has a 22 oz. fluid capacity. That said, although the extra fluid capacity is nice the…
view full answer...