Hi Chester; the smaller mounting holes on the #T4093200 are…

For your 2021 Chevrolet Blazer…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

You&am…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

I spoke with my contact at Lippert and this is what they sent me about the external sensor issue you have: External sensor error means there is an issue with the rear leveling sensor. This will be located 2-3 foot behind the rearmost axle. There…

The Trailer Valet RVR9 Remote-Controlled Trailer Mover #TVRVR9 is a 4-motor device. There are other versions of this unit that use fewer motors but this one has 4. The maximum surface slope compatible with this device is 5 degrees. I did confirm…

Unless you want to completely clean out every bit of grease you will need to stick to a LMX red grease like item #L11390 that comes with the CE Smith Trailer Idler Hub Assembly item #CE13515. You can use your blue marine grease but you…

Hello John. The Hot Dot LEDs #328-003-17A you were looking at are definitely a good option. Especially is you need something with the…

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

I would be happy to! The bottom of the foot to the center of the pipe mount is…

Hey Jeff, Since the tongue of a 2021 Airstream Bambi 16RB has a large propane tank cover in the way…