Videos
for RV Cargo Slides
Help Articles
for RV Cargo Slides
Expert Answers
for RV Cargo Slides
I spoke with MORrdye, and they said that they do not have a dimensional drawing of the screw holes as their attachment uses TEK screws. They go on to mention that they've never had an issue reported as long as all the…
view full answer...Hey Jeff, the WeatherTech ImpactLiner Custom Truck Bed Mat #WT99KF would get secured to your bed using the TechHold Retention Device (see image attached) which is just a adhesive ball and socket. Basically, one the ball end would get stuck to the…
view full answer...The MORryde RV Cargo Sliding Tray #MR47FR has 1.57" of clearance from the bottom of the tray to the bottom of the slides. More than likely you will need the Height Adjustment Kit #MR34VR which will raise the tray to sit…
view full answer...Hey Mike as long as your 2018 Primetime Lacrosse has 3 inch diameter axles the Roadmaster Comfort Ride part #RM-2460-2560 is going to fit and work great.
view full answer...The locking mechanism for the MORryde RV Cargo Sliding Tray #MR44FR is only going to keep the tray locked in the rollers and they don't really offer any kind of way to lock the tray at certain extensions. To avoid spending…
view full answer...We have the MORryde RV Cargo Sliding Tray - 90" x 33" - 2 Way Slide - 60 Percent Extension - 800 lbs #MR46FR. This will replace your old system no problem. If you have a damaged unit you can…
view full answer...The typical tire should run about 158 degrees (Farenheidt) once you get going down the road, but this can vary greatly depending on the weight of the trailer, how fast you're traveling, and also driving habits. So while 158…
view full answer...We definitely can help! To add lift to your MORryde RV Cargo Tray #MR63FR, we do have a kit for that. The part you need is the Height Adjustment Kit for MORryde RV Cargo Sliding Trays #MR34VR. With these brackets, you can adjust them to provide you…
view full answer...Yes they do Ernie, but it looks like the closest I was able to find to what you're looking for is the MORryde RV Cargo Sliding Tray #MR69FR which is 90" x 29". This cargo tray…
view full answer...The inside tray of the MORryde Generator Tray - 25-3/4" x 26-1/4" Item #MR79RR is 24" wide x 24" deep x 2-3/4" tall. For…
view full answer...The overall width of the MORryde Sliding Tray #MR39FR is 29 inches so it would fit through a 30 inch wide opening. We also have the height adjustment kit part #MR34VR which allows for height changes between 2-1/2 inch to 3-1/8 inch.
view full answer...Yes, the side walls on a load range E tire will be stronger than the sidewalls on load range D tire. However, just because it is a 5th wheel trailer does not mean you need the higher load range. I assume you have 225/75-15 tires as that is what you…
view full answer...