Videos
for Power Steering Coolers
Help Articles
for Power Steering Coolers
Expert Answers
for Power Steering Coolers
The trailer hitch I recommend for your 2008 Honda Odyssey is the Draw-Tite Max-Frame #75270 because it doesn't require any fascia trimming (like the etrailer and Curt might). This, as well as the other trailer hitches, exceeds the weight…
view full answer...I took a look at the online owner's manual for your 2005 Honda Pilot. It states that this vehicle, if equipped with a transmission cooler and power steering fluid cooler, has a maximum towing capacity of 3,500 pounds for a standard trailer. This…
view full answer...The transmission return line on your 2005 Honda Pilot can be located between the frame crosstube and the drivers side support bracket (see photo). The return line will be the line closest to the front of the vehicle. We installed Derale Series 8000…
view full answer...I have exactly what you need to add a 7-way trailer connector to a 2016 Honda Odyssey. For this, you'll need to start with a 4-way trailer connector and I recommend the T-One Vehicle Wiring Harness part #118521 which is plug-n-play. Then you can…
view full answer...The main differences between the available transmission coolers is the style of the coolers and the size. There are style that are more efficient that others, and obviously the bigger the cooler the more efficient it is as well. The tube-and-fin…
view full answer...Yes, the etrailer Trailer Hitch Receiver #e98851 is designed to be compatible with a full sized spare tire on a 2006 Honda Pilot. If you will be towing a trailer with your Honda Pilot you will also need a vehicle wiring harness. I suggest part number…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...For a transmission cooler that would work well on your 2005 Acura MDX the Derale part #D13503 would be an excellent choice. Since this is a larger cooler at 11" Wide x 8-3/4" tall x 7/8" deep it would work great for if you wanted to…
view full answer...Without knowing which cameras you have installed on your 2016 Jayco Precept, I can not say for sure if they will be compatible with the Rear View Safety Color Monitor #RVS-6139Q. However, if your cameras are not compatible, you can use the Rear View…
view full answer...I have a solution for you, but you're not going to be able to use the #RVS-OA04 in order to connect to a camera with a 4 pin female connection. We also do not have a 4 pin male to 5 pin male adapter available that would allow you to bridge the…
view full answer...The Dexter Nev-R-Lube 6k hubs use 42 mm bearings so the correct replacement is the part #31-73-3.
view full answer...Based on my research the 1998 Fleetwood Bounder M-36S Class A RV with the Ford 460 engine is based on the Ford F-53 chassis. Coolers are not vehicle-speciofic; you can install as large a cooler as you have space to mount one. Coolers are also not…
view full answer...