Videos
for Hitch Pins and Clips
Help Articles
for Hitch Pins and Clips
Expert Answers
for Hitch Pins and Clips
The Hitch Pin and Clip For 2-1/2" and 3" Hitches #337HP6256WC doesn't have a weight rating, but this is normal for a pin setup. These are tested to hold the weight ratings of the hitches they are made…
view full answer...No, it is not. The Roadmaster D-Ring Adapters item #RM-035 and item #RM-035-1 are only compatible with Roadmaster tow bars. There are no D-Ring adapters that work with the Curt Rambler Non-Binding Tow Bar item #C26FR.
view full answer...Hey Scott, so since you have a Dometic AC unit currently the replacement you'd want is the Advent Air part #ACDOM150 which was designed to replace Dometic units which means a really simple install that allows you to use current…
view full answer...Hi Joe, The Blue Ox Base Plate Kit #BX1139 is a confirmed fit for your 2024 Jeep Wrangler Rubicon X per Blue Ox. I don't currently have an installation video on a model with a steel bumper but I did measure from the mounting holes…
view full answer...Hey John, we actually have a supplemental braking system that was designed specifically to be used with the Spartan K2 chassis you have that has the Safe Haul system with the Demco Air Force One Flat Tow Brake System part #DM54YV so this would be…
view full answer...We only had the black #LH94VR you found before so I went ahead and had it added to our site. The replacement wheel you are looking for is the Aluminum Margay Trailer Wheel - 15" x 5" Rim - 5 on 4-1/2 - Gunmetal Gray…
view full answer...If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…
view full answer...Hey there Nickie, I would go with the etrailer Adjustable 2-Ball Mount #e66PR. Not only does it look really nice with the matte black powder coat and black nickel plating on balls and hitch pin, it also holds up really well against the elements,…
view full answer...Great question Luke! These are all great options, but let me point out a few differences for you. The etrailer Adjustable 2-Ball Mount #e66PR is a good quality, affordable option compared to similar options like the BulletProof Hitches 2-Ball Mount…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...45 PSI is as low as you can go per tire for a 3,800 lbs trailer. The Goodyear Endurance ST225/75R15 Radial Tire item #LH33FR, you were looking at, is a load range E tire with a maximum capacity of 2,830lbs at 80 PSI per tire. The air pressure can…
view full answer...