Videos
for Cargo Bar
Help Articles
for Cargo Bar
Expert Answers
for Cargo Bar
Yes Ben, the etrailer Soft Tonneau Cover #e25DR truly is a fit for the 2024 Ford Ranger. Our FitGuide team has confirmed this works with the 2019-Current Ford Rangers with the 4'10" bed.
view full answer...I reached out to my contact at Dexter and with the serial number you provided they were able to track down the correct replacement bearings for the spindles on your axles. For the inner bearing you will use part #25580 for the bearing itself and…
view full answer...That is correct. If your 2021 Wrangler Unlimited has the connector located under the dash to the left of the steering column near the top of the e-brake pedal as shown in the provided photo, you'd use the #3073-P harness to connect the…
view full answer...To determine your spindle size, you can either pull one hub off your trailer and look at the bearing numbers on the face of the inner and the outer bearing, or you can measure the spindle itself. I've attached an article and a photo to assist. If…
view full answer...The code "LRE" means the tire has a load range e rating. This is similar to the ply rating that was once used to gauge weight capacity but that is now carried out by the load range rating. For replacement, we have the Provider ST235/80R16…
view full answer...The 15" term is in reference to the size wheel that the Provider ST225/75R15 Radial Tire is mounted to. This particular part #A225R6FPS is a tire and wheel combo. The wheel has a 6 on 5-1/2 bolt pattern which is important to know so that your…
view full answer...You are indeed right to think this way. When picking out the appropriate leaf springs for your custom built trailer you will want to choose them based on what the actual loaded weight of the trailer will be. Just make sure that the leaf springs have…
view full answer...The spring capacity is the weight the spring is designed to support. For example the 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 25-1/4" Long #e57SR you were looking at is designed for 4000lb axles, meaning each spring can support…
view full answer...Having the puck system is a great feature. If you ever plan on loading the bed with mulch, sand or rock you'll quickly find that having rails permanently bolted to the bed floor is a real pain. Not only that, but the pucks look a lot better.…
view full answer...Yes, the HitchMate StabiLoad Support for Cargo Stabilizer Bars #HE4017 would fit over the end of a 2x4.
view full answer...The #PSEA20000103 is one of the shortest A-frame jacks we offer from the mounting bracket to the top of the jack at 11 inches. The best solution I can recommend would be to go with a side mounted trailer jack like part #PS1400300303 that would…
view full answer...There is an easier solution that a different jack. You can use a longer ball mount so that the trailer, and the jack, will be further away allowing you to lower the tail gate without hitting the jack. Then you could use any jack you wanted. If that…
view full answer...