Videos
for Camping Lights
Help Articles
for Camping Lights
Expert Answers
for Camping Lights
I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...There is no mounting hardware included with the Aluminum A-Frame Trailer Tongue Toolbox, item #350970, due to the different construction and mounting locations that may be required for many different styles of trailers. I would recommend using a…
view full answer...You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…
view full answer...Thanks for reaching out, Michael! The Dexter Electric Trailer Brakes #K23-086-087-00 are compatible with 3,500 lb axles and have the standard 4-bolt pattern so if that matches the specs of your axle then this will definitely work for your…
view full answer...From what I could find, the #171255UC grease seal has an inner diameter of 1.719 inches and an outer diameter of 2.565 inches. These dimensions match our TruRyde Double Lip Grease Seals, #RG06-050. If possible, I recommend verifying the inner…
view full answer...I looked up the dimensions of your Liteco 179 interior light and the closest thing we have to it would be the part #ILL06COB which will be 11 inches by 4 inches. Your current light is 19-1/2 inches by 6-1/2 inches so this would be a bit smaller but…
view full answer...You can use the RV Propane Gas Detector #RS64FR to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.
view full answer...The EB01-140 and EB01-145 are Redneck Trailer Supply part numbers for a Dexter 12-1/4 x 3-3/8 7-bolt brake assemblies for a 9-10K axle. The proper replacements are available as part #23-450-451, which includes the left and right self adjusting…
view full answer...Hi Shelly, thanks for the question and it's possible we have something depending on the dimensions of your skylight/sunroof. What most people use for this is the Camco Lights Out Retractable Shade for RV Roof Vents #CAM42913. Technically…
view full answer...Thank you for all of the info you gave. Based on that you'd want the trailer hub and drum part #AKHD-545-35-K that you referenced and then for brake assemblies to match you'd want the #AKEBRK-35-SA which is a self adjusting set for…
view full answer...We do offer a range of replacement trailer hub assemblies that use the L68149 bearing as their inner bearing and that have the 5-on-4-1/2-inch bolt pattern. All can be seen on the link at right. However, none of these 16 hubs uses that same bearing…
view full answer...The Curt Front Hitch #C31076 will install on the front driver and passenger side frame rails. I have linked a picture showing the bolt holes on the passenger side frame rail and it will be the same for the driver's side. I checked and the…
view full answer...