Filter Products
Filter Results
$70.00 - $72.00
$15.00 - $15.00
$40.00 - $40.00
$50.00 - $50.00
$49.00 - $49.00
$40.00 - $40.00
$27.50 - $27.50
$9.09 - $9.09
$3.46 - $20.36
$15.00 - $15.00
$301.00 - $301.00
$43.19 - $43.19
$116.95 - $350.00
$12.00 - $120.00
Filter by Tool
$70.00 - $72.00
$15.00 - $15.00
$40.00 - $40.00
$50.00 - $50.00
$49.00 - $49.00
$40.00 - $40.00
$27.50 - $27.50
$9.09 - $9.09
$3.46 - $20.36
$15.00 - $15.00
$301.00 - $301.00
$43.19 - $43.19
$116.95 - $350.00
$12.00 - $120.00
Videos
for Bike Tools
Help Articles
for Bike Tools
Expert Answers
for Bike Tools
Unfortunately the Replacement Handlebar for Thule Chariot Cross, Lite, and Sport Bike Trailer/Strollers #TH24KH is not going to work with your Croozer Kid 2 Child Carrier. Since your Croozer has been discontinued for a quite a while I'd…
view full answer...The Square Pipe Mount Swivel Jack #TJDP-7000-B uses the Replacement Pipe for etrailer and Ram Pipe Mount Swivel Jacks #TJP-OP58 which has a 2 inch inner diameter and 2-1/4 inch outer diameter. In the video the description is of the weld-on pipe…
view full answer...I have a solution for you but you're going to need to weld on a pipe mount. There are no jacks available that will clamp onto your frame and give you that much of a lift. The clamps won't support that much extension. For that high of…
view full answer...The overall better route will be the B and W Companion Hitch part #BWRVK3500 as long as the vehicle has a B and W Gooseneck Turnoverball hitch installed. The Companion setup is often regarded as the nicest hitch around so whenever available I…
view full answer...The best setup for your 2022 Ford F-350 would be a B and W Turnoverball Rail Kit part #BWGNRK1116 which doubles as both a gooseneck ball hitch and a fifth wheel hitch rail kit and the Companion Hitch part #BWRVK3500 which fits this rail kit. This…
view full answer...You can use a reducer sleeve like the #e26YR on your F-250 receiver with the e2 shank. What you don't want to do is use a reducer and extender like the #e53YR you were looking at. The extender will reduce the capacity of your hitch by 50%.
view full answer...Thanks for reaching out! You can definitely modify the Yakima 54" Tracks for Roof Racks #Y01127 by cutting them and installing them in different sections, yes. To complete this installation you'll need 2 more sets of the EndCaps #Y8810103…
view full answer...The only replacement end caps available for the Yakima Roof Rack Track Systems are the Replacement EndCaps #Y8810103. These caps feature a width of just over 1-5/8 inches. If you can tell me the model number of your Yakima tracks, or if they happen…
view full answer...What you'll do is use a separate wheel chock behind the wheels after using the Thule RV Wheel Levelers #TH307617. All you need to use is the Buyers Products 10" Wheel Chock #337WC1086UWH.
view full answer...The Replacement Bracket #8880735 measures 18-3/8" long and 2-3/4" wide. It is used on Yakima Skyrise tents such as Yakima SkyRise HD Tent for Roof Rack Crossbars - 2 Person - 400 lbs #Y07436.
view full answer...The difference between the Yakima HD Crossbars like the #Y74MR and the regular Yakima Tracks like the #Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD…
view full answer...The Replacement Clamp Assembly part #8880737 does look like the one you need but it is actually the Replacement Mounting Assembly for SkyRise Rooftop Tents part #8880735 which also comes with the brace that needs to be replaced along with the clamp…
view full answer...Videos
for Bike Tools
Help Articles
for Bike Tools
Expert Answers
for Bike Tools
Unfortunately the Replacement Handlebar for Thule Chariot Cross, Lite, and Sport Bike Trailer/Strollers #TH24KH is not going to work with your Croozer Kid 2 Child Carrier. Since your Croozer has been discontinued for a quite a while I'd…
view full answer...The Square Pipe Mount Swivel Jack #TJDP-7000-B uses the Replacement Pipe for etrailer and Ram Pipe Mount Swivel Jacks #TJP-OP58 which has a 2 inch inner diameter and 2-1/4 inch outer diameter. In the video the description is of the weld-on pipe…
view full answer...I have a solution for you but you're going to need to weld on a pipe mount. There are no jacks available that will clamp onto your frame and give you that much of a lift. The clamps won't support that much extension. For that…
view full answer...The overall better route will be the B and W Companion Hitch part #BWRVK3500 as long as the vehicle has a B and W Gooseneck Turnoverball hitch installed. The Companion setup is often regarded as the nicest hitch around so whenever available I…
view full answer...The best setup for your 2022 Ford F-350 would be a B and W Turnoverball Rail Kit part #BWGNRK1116 which doubles as both a gooseneck ball hitch and a fifth wheel hitch rail kit and the Companion Hitch part #BWRVK3500 which fits this rail kit. This…
view full answer...You can use a reducer sleeve like the #e26YR on your F-250 receiver with the e2 shank. What you don't want to do is use a reducer and extender like the #e53YR you were looking at. The extender will reduce the capacity of your hitch by…
view full answer...Thanks for reaching out! You can definitely modify the Yakima 54" Tracks for Roof Racks #Y01127 by cutting them and installing them in different sections, yes. To complete this installation you'll need 2 more sets of the EndCaps…
view full answer...The only replacement end caps available for the Yakima Roof Rack Track Systems are the Replacement EndCaps #Y8810103. These caps feature a width of just over 1-5/8 inches. If you can tell me the model number of your Yakima tracks, or if they happen…
view full answer...What you'll do is use a separate wheel chock behind the wheels after using the Thule RV Wheel Levelers #TH307617. All you need to use is the Buyers Products 10" Wheel Chock #337WC1086UWH.
view full answer...The Replacement Bracket #8880735 measures 18-3/8" long and 2-3/4" wide. It is used on Yakima Skyrise tents such as Yakima SkyRise HD Tent for Roof Rack Crossbars - 2 Person - 400 lbs #Y07436.
view full answer...The difference between the Yakima HD Crossbars like the #Y74MR and the regular Yakima Tracks like the #Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD…
view full answer...The Replacement Clamp Assembly part #8880737 does look like the one you need but it is actually the Replacement Mounting Assembly for SkyRise Rooftop Tents part #8880735 which also comes with the brace that needs to be replaced along with the clamp…
view full answer...