Unfortunately the Replacement Handlebar for Thule Chariot Cross, Lite, and Sport Bike Trailer/Strollers #TH24KH is not going to work with your Croozer Kid 2 Child Carrier. Since your Croozer has been discontinued for a quite a while…

The Square Pipe Mount Swivel Jack #TJDP-7000-B uses the Replacement Pipe for etrailer and Ram Pipe Mount Swivel Jacks #TJP-OP58 which has a 2 inch inner diameter and 2-1/4 inch outer diameter. In the video the description is of the weld-on pipe…

I have a solution for you but you're going to need to weld on a pipe mount. There are no jacks available that will clamp onto your frame and give you that much of a lift. The clamps won't support that much…

I checked with Fulton and the U-bolt part #FETC0101 that you referenced has an inner length of 9-1/8 inches and an inner width of 3-5/58 inches.

The overall better route will be the B and W Companion Hitch part #BWRVK3500 as long as the vehicle has a B and W Gooseneck Turnoverball hitch installed. The Companion setup is often regarded as the nicest hitch around so whenever available I…

The best setup for your 2022 Ford F-350 would be a B and W Turnoverball Rail Kit part #BWGNRK1116 which doubles as both a gooseneck ball hitch and a fifth wheel hitch rail kit and the Companion Hitch part #BWRVK3500 which fits this rail kit. This…

You can use a reducer sleeve like the #e26YR on your F-250 receiver with the e2 shank. What you don't want to do is use a reducer and extender like the #e53YR you were looking at. The extender will reduce the capacity of your…

The only replacement end caps available for the Yakima Roof Rack Track Systems are the Replacement EndCaps #Y8810103. These caps feature a width of just over 1-5/8 inches. If you can tell me the model number of your Yakima tracks, or if they happen…

Thanks for reaching out! You can definitely modify the Yakima 54" Tracks for Roof Racks #Y01127 by cutting them and installing them in different sections, yes. To complete this installation you'll need 2 more…

We have the Low Profile LED RV Tail Light w/ License Bracket #RVSTLB61 and the Low Profile LED RV Tail Light #RVSTLB60.These are the same as the Tail Light #RVSTB60 with LED's instead of an incandescent bulb.

The only way to install the Yakima 60" HD Tracks for Roof Racks, OverHaul HD, and OutPost HD #Y74MR is with drilling. We do not have a different way to install these.

The Replacement Clamp Assembly part #8880737 does look like the one you need but it is actually the Replacement Mounting Assembly for SkyRise Rooftop Tents part #8880735 which also comes with the brace that needs to be replaced along with the clamp…

Unfortunately the Replacement Handlebar for Thule Chariot Cross, Lite, and Sport Bike Trailer/Strollers #TH24KH is not going to work with your Croozer Kid 2 Child Carrier. Since your Croozer has been discontinued for a quite a while…

The Square Pipe Mount Swivel Jack #TJDP-7000-B uses the Replacement Pipe for etrailer and Ram Pipe Mount Swivel Jacks #TJP-OP58 which has a 2 inch inner diameter and 2-1/4 inch outer diameter. In the video the description is of the weld-on pipe…

I have a solution for you but you're going to need to weld on a pipe mount. There are no jacks available that will clamp onto your frame and give you that much of a lift. The clamps won't support that…

I checked with Fulton and the U-bolt part #FETC0101 that you referenced has an inner length of 9-1/8 inches and an inner width of 3-5/58 inches.

The overall better route will be the B and W Companion Hitch part #BWRVK3500 as long as the vehicle has a B and W Gooseneck Turnoverball hitch installed. The Companion setup is often regarded as the nicest hitch around so whenever available I…

The best setup for your 2022 Ford F-350 would be a B and W Turnoverball Rail Kit part #BWGNRK1116 which doubles as both a gooseneck ball hitch and a fifth wheel hitch rail kit and the Companion Hitch part #BWRVK3500 which fits this rail kit. This…

You can use a reducer sleeve like the #e26YR on your F-250 receiver with the e2 shank. What you don't want to do is use a reducer and extender like the #e53YR you were looking at. The extender will reduce the capacity of…

The only replacement end caps available for the Yakima Roof Rack Track Systems are the Replacement EndCaps #Y8810103. These caps feature a width of just over 1-5/8 inches. If you can tell me the model number of your Yakima tracks, or if they happen…

Thanks for reaching out! You can definitely modify the Yakima 54" Tracks for Roof Racks #Y01127 by cutting them and installing them in different sections, yes. To complete this installation you'll need…

We have the Low Profile LED RV Tail Light w/ License Bracket #RVSTLB61 and the Low Profile LED RV Tail Light #RVSTLB60.These are the same as the Tail Light #RVSTB60 with LED's instead of an incandescent bulb.

The only way to install the Yakima 60" HD Tracks for Roof Racks, OverHaul HD, and OutPost HD #Y74MR is with drilling. We do not have a different way to install these.

The Replacement Clamp Assembly part #8880737 does look like the one you need but it is actually the Replacement Mounting Assembly for SkyRise Rooftop Tents part #8880735 which also comes with the brace that needs to be replaced along with the clamp…