Product Specs:
Custom Fit Vehicle Wiring
Trailer Hitch Wiring
No Converter
Custom Fit
4 Flat
7 Round - Blade
CURT
Quickly and easily install a 7-way and a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into OEM tow package wiring harness - no cutting, splicing or tapping required.
Video of Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors
Average Customer Rating: 4.7 out of 5 stars (610 Customer Reviews)
Quickly and easily install a 7-way and a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into OEM tow package wiring harness - no cutting, splicing or tapping required.The Curt T-Connector vehicle wiring harness fit as recommended by the etrailer.com customer service representative. I wanted to be sure the electrical connector package would fit my Draw-Tite hitch, and it did. The instructions were straightforward, although there were no screws or nuts to attach the metal bracket to the hitch. I had to supply those. I believe they should have been part of the kit. The installation video on the etrailer.com site was very helpful.
This connector worked perfectly on my '06 Chevy Trailblazer. It was very easy to swap it out with my original connector, and the addition of the 4-pole plug makes it easy to eliminate the 7 to 4 pin adapter.
Excellent fit, oversized spare tire still fit underneath (285/70r17).
I am having a problem with the install of the three Curt trailer components I purchased. I intentionally bought all of the same brand assuming that they would work together. The problem is that the Curt wiring harness (part# C55774) is too long and rigid. When the 7-pin connector is installed in the bracket that comes with it, it measure 5 inches until the black wire protective sleeve bends (to go under the hitch receiver frame).
The no-drill bracket (part# C57202) is supposed to attach the harness bracket to the hitch. But it is only 6.5" long, and the hitch tube is 3" wide. So with the bracket attached to the hitch, there is only 3.5" of space left to mount the harness bracket so that the screw holes line up.
I am disappointed that this is the case, especially as I called etrailer to check that the parts I was ordering would work together.
It looks like I will have to discard C57202 and drill two holes into the bottom of the hitch and mount the harness bracket directly. This is what I wanted to avoid - having to drill holes.
Very easy, plugged right into the uscar connector, drilled 2 holes for the bracket, done
Super easy, very nice! Great engineering, couldn’t have been any easier! The girls at etrailer are super friendly and very helpful! Great prices and quick shipping, too!!
Mike
4/13/2019
Great. No problems.
This was supposed to be a plug in installation for my 2003 Mercury Mountaineer. No it wasn't. Completely different connector, and the wiring was 2 feet too short. Was able to use it after a bit of clipping and splicing.
Very good, fit perfectly
Greg
4/21/2024
It has been working great, holding up well,the same as the day I purchased it. Great product
Greg
5/15/2024
It has been great works exactly as it should
Product I ordered had an inaccurate description. Contacted customer service to return they would not send return shipping label so since the return shipping would have costed more than the part I threw it in the trash and ordered the part needed from another supplier. Needless to say I will not be ordering anything again.
Working well. Have used the four prong plug only but am glad to have the 7 way available if needed.
Perfect fit. My truck was not equipped with a tow package so I was a little worried it wouldn’t fit. The wiring and plug were already there with a cap on it to seal it from dirt/water. Took the cap off and this harness snapped right in place. Also installed an etrailer hitch and new bumper. Very happy with the products and the installer tools and information provided by etrailer.com.
Always accurate parts and information
Harness was easy to install. The truck came prewired. It just needed the adapter. We dremeled our the back of the bumper (2019 Titan’s have the cut our outlined on the back side already). We had to dremel 2 side prices off the harness, but it slide right now. Then we drilled through the plastics bumper cover and the metal on the bumper and bolted the bracket to the bumper.
The 4 point is just fished between the license plate and the bumper. It was easy and it now looks factory. Very happy with how it came out! Install was a cinch!
I have a 2018 Nissan Titan, and while the connector was a perfect fit for connectivity to the factory connector. The Curt T-Connector wiring harness was about 6 inches short from connecting to the factory harness when mounted on the trailer hitch bracket. So, I was forced to mount it on the opposite side by drilling holes in bumper.
great product oem quality
Perfect fit, works well
If you have multiple trailers that either use a 4-way flat or 7-pin round connector and get tried of having to use an adapter go with this setup. I've had one on my other truck for a couple years and no problems with 'em thus far. You can technically use the old existing mount on the receiver hitch itself but the 4-way will dangle unless you ziptie it up.
My 2002 Ford Excursion 7.3L diesel had the original factory hitch and wiring harness. The quality and heft of the Curt T-Connector is impressive. I bet I get years of use without problems.
Great product and very helpful staff! Thank you!!
Great product. Installed on my 2018 Jeep GC. Because of dual 4 pin and 7 pin connector I don’t need an adaptor when swapping out trailers/camper. Clean look to it as well.
Bought this because of the split 4 pin and 7 pin connectors. I’ve had so many 7 pin to 4 pin adaptors and would forget that I let my son or son in-law use it and had to buy another one when I needed it. This will stop me from the need to buy another adaptor, good for me not good for my son and son in-law when they come over to borrow the trailer. LOL, who am I kidding I’ll still go with them to the store and buy another one.
Great product & customer service
The actual trailer hitch was fine but the wiring kit was not the right kind. When I called to get a return authorization I was told that more than one half the cost of wiring kit will be deducted from my return for postage. I have never had to pay for returns to any company before. I will not be recommending your company
There was no place on the new hitch to bolt the end to, which was a disappointment. For now I sip tied the end to the hitch in an area where it does not move.
Great fitment. Had a little difficulty getting to the right version of this but the amazing customer service at ETrailer helped me get to the correct one. Thank y’all! I love any business that’s not named after a rain forrest!
VS
Product Specs:
Custom Fit Vehicle Wiring
Trailer Hitch Wiring
No Converter
Custom Fit
7 Round - Blade
4 Flat
Hopkins
This 7- and 4-pole trailer connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your vehicle's OEM wiring system and mounts with included bracket.
Video of 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
Average Customer Rating: 4.8 out of 5 stars (2371 Customer Reviews)
This 7- and 4-pole trailer connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your vehicle's OEM wiring system and mounts with included bracket.The box arrived opened and damaged. My wiring harness was missing. When I called to tell them my wiring harness was missing they told me that it was shipping separately but could not tell me when it would arrive. I later got an email telling me all of my items were delivered and asked me to leave a review. I still don't have my wiring harness and will not have the hitch installed by this weekend like needed because I don't know if I am ever getting my wiring harness.not to mention the box had no padding around the hitch so it's all scratched up.
Katrina D.
8/3/2023
I am sorry to hear that your order arrived in this condition. I see that our customer service department is currently working on a solution for you.
Worked exactly how described, great replacement for my risty only bracket and 7 pin connector. Fits my 2006 Chevy Silverado 2500HD perfect, plug and play. Bought specifically because the bracket is included. And with both 4 and 7 pin connectors, I don't have to use an adapter anymore!
I am not sure how this bracket passed quality control. It sure is a good thing I'm not planning on using it. Really disappointing to see how quality is overlooked during the packaging process. This should have never left in this condition.
Jenny N.
6/30/2023
Oh! It is definitely not how we want the bracket to arrive to you. I will have our Customer Service team reach out.
This company is an absolute pleasure to work with. Item was delivered fast and exactly as described. This is the second item I’ve bout from etrailer the first being a 9000lb rated hitch. Will order again from these folks when if I need stuff for my truck.
Easy installation and very helpful installation video.
James
3/8/2024
One year later and no issues
It was easy to install and took care of the issue I had of one of the trailer light segments not working.
This connector and bracket is a great product giving both 7 pin and 4 pin connections. I was able to reverse the bracket (making new holes) to allow it to fit behind the bumper cover piece that hides the hitch when not in use. The only drawback is that a wiring harness that fits the round 7 pin to the Buick Enclave rectangle plug is not available as a separate purchase. Had to buy an additional 7 pin outlet that came with the correct plug assembly and use that for my combo plug.
took longer to remove the factory cover than to instal the connector. worked as advertised. I would buy this again if ever needed
This thing couldn't be better. Easy mounting. Plug and play. I can now connect any trailer I want. Love it, love it, love it!
Ali
1/7/2024
This was a major upgrade for me at the time. A year later, Ive hauled massive loads across the country, and this connector harness works perfectly every time
I bought this because I needed the bracket and it was the quickest way to get it they do not stock the bracket alone. We where installing tommy lifts and needed t move the original connector which was installed on the bumper.
Plug and play baby! 2 minute install. Finally an easy fix to something!
Here's some snaps of my Hopkins #40975 installation. I can confirm that it's an identical replacement for the 2014 Silverado 1500 trailer-light blank insert, no bracket required. It took me 30 seconds to plug the Silverado's OEM 7-pin round connector (located inside the blank insert) into the #40975 Wiring Kit and snap it into the cutout. Then I tested the flat 4-pin outlet of the #40975 with a 5 dollar 4-pin LED tester from West Marine, and all light functions tested good. Shweet! To remove the OEM blank plug, it helps to reach behind it and pinch the two spring clips holding it in place... same with the #40975 if it needs to be removed for some reason. When I ordered the part from eTrailer, your site had a comment, "This will not fit your vehicle. See below for compatible parts," or words to that effect. Maybe take a look at that and remove the comment, as the #40975 is an exact fit for 2014 Silverado 1500, no bracket needed. Thanks, eTrailer team!
Ron P.
3/19/2015
Although I havent towed since installing the Hopkins Pollak wiring kit since I installed it a year ago, I have tested the 4-pin connector for proper function using a 4-pin LED tester from West Marine and it checks out okay. Recently I inspected the kit for water intrusion mentioned by one of the raters, and I found no evidence of moisture inside the dual-connector compartment. On installation, I did make liberal use of the dielectric grease that accompanies the kit. Good product, easy installation, and great price.
It came with it's own bracket, which is a plus. It was compatible with etrailer.com's part number C56357, which is also a plus. The self tapping screws being the only hardware coming with the item was a disappointment. I just installed etrailer.com's part number 76301 hitch receiver which has a mounting plate for brackets like this. The self tapping screws, which might have been effective, wouldn't have looked "professional." After finding some hardware which worked, it went on smoothly and fits well with the rest of the assembly.
Matt W.
7/7/2019
This product has been working well for the past year. I feel this was a smart purchase.
This dual connector adds a professional looking touch to our tow wiring installation
Scratched my head for a while, trying to find a quality way to connect this vehicle end 4/7 wire socket to my trailer ready (almost) 2015 Audi Q7. Finally decided that it really didn’t need to be bolted, but could be hose clamped to the existing heavy duty Audi bracket.
Mounted it sideways with a 1” diameter and a 3” diameter hose clamp. Be sure to use a 3” clamp with lots of serrations that all it to tighten it down a lot.
You’ll need to drill out the small hole of the supplied bracket to allow a clamp to fit through it. The other hole is a slot, and works unaltered. Small clamp on bottom, large clamp on top.
You’ll also need to relieve a small spot on the trim piece to make room for the 4-wire door to o-en freely. This is marked as red on one of the pictures.
Looks good and should work good!
Rob
9/22/2019
Good installation approach for q7’s. Keeps water from collecting in wiring junctions.
Item received as described. It was simply plug and play. Out with the old, and the new was an exact replacement. Very satisfied.
The self tapping screws that come with the mount are junk,
The product is Good.
7 and 4-Pole Trailer Connector Socket does not fit my towing vehicle.
Today I just received my etrailer order #114979486, that consisted of: Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector (ITEM # C56431) and 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End (ITEM # HM40975) for my 2020 Ford Ranger. I easily installed the harness, but the Trailer Connector Socket does not seem to fit on the rear bumper, next to the license plate.
Last week, I chatted with etrailer customer support rep and I was assured that the connector Socket (ITEM # HM40975) would fit on my 2020 Ford Ranger.
This etrailer customer support representative referenced a previous Q&A Topic titled, "Can the HM40975 be used on a 2021 Ford Ranger". I was also assured that 2020 and 2021 Rangers have identically constructed rear bumpers.
Today, I spoke with a different etrailer customer support representative. This rep told me 7-Way Trailer Connector (ITEM # C56431) was not compatible with the 2020 Ford Ranger recommend reaching out to the manufacturer directly for more information.
I'm very frustrated!!!! Can I please get a solution to this issue ASAP.
Jenny N.
7/19/2023
I am sorry that this has been a frustrating experience, however I do have an answer for you. The Hopkins connector part # HM40975 is technically not a fit on its own for a 2020 Ford Ranger. The short reason why is that the Ford Rangers do not have the round US Carr type of connector to plug into. Now by adding the Curt harness part # C56431 like you did, does make that round connector that you can plug into the back of the Hopkins connector that will give you the 7 and 4 way you want. Since it is using two different manufacturer products together, I do encourage you to test the 4 and 7 way to make sure all the signals are working correctly. In theory they work together, however they are not tested. The issue is going to be that the bracket that comes with the Hopkins connector is not going to match with anything on the Ford Ranger to connect to. It would just be bolted to the bumper or you could also consider using part # C57202 to install it on your hitch.
Fit and works fine. My old one was just the 4 plug so now I don’t have to use the adapter for 7 prong anymore.
Doug
11/3/2023
Works fine- no issues.
Great product, it was just what I was needing to complete my project.
Came in on time. The parts were in good shape and fit perfectly.
Another easy installation old one out doing in 15 minutes
A very good option to cut down on rattle. This is a durable product that is fairly simple to install. My only complaint is the magnet to keep cover closed when not towing should be stronger. I am happy with the purchase and it looks like it will be useable for years.
Fast shipping. Nice quality product
Warren
4/26/2024
Products still working great.
Top quality trailer connector that fir original wiring harness perfectly.
Installed in under 15 minutes.
John C.
7/26/2022
Works great and looks great. Get compliments on the hitch.
Customers compare HM40975 to these similar products
Ask the Experts about this Hopkins Custom Fit Vehicle Wiring
Do you have a question about this Custom Fit Vehicle Wiring?
Heather A.
10/26/2018
The 7-way bracket that comes with the wiring harness part # C55774 is designed to be installed with the wiring harness bracket hanging below the no drill bracket part # C57202. Since you are worried about the loose wiring I would recommend using some wire loom such as part # 459075-1 to protect your wiring and zip tie any slack with zip ties part # DW05726-25. I know this is not the option you wanted but I feel it is better than drilling into the hitch.
Helpful Links
Accessories-and-Parts/Curt/C57202.html
Custom-Fit-Vehicle-Wiring/Curt/C55774.html
Tools/Deka/DW05726-25.html
Tools/Spectro/459075-1.html