The largest wraparound RV step covers that we currently offer are 23-1/2" wide, like part # PR83SR. To get something larger you would most likely need to reach out to a manufacturer, like Camco or Prest-O-Fit, to custom order 30" step covers. view full answer...
The length of the Camco RV Step Cover part # CAM42935 that you referenced is 21-1/2 inches and fits most standard RV step dimensions. view full answer...
While we don't have a set of wraparound RV step rugs that are designed to fit a 13" depth, we do carry landing rugs like the Prest-O-Fit Interior RV Step Rug # PR55VR, which are 23-1/2" Wide x 13-1/2" Deep and come with a different mounting style. This rug has Velcro strips with an adhesive backing that would allow you to mount it to the step and you could just trim off any excess material that extends past the step. view full answer...
I recommend using 2 of the Prest-O-Fit Wraparound Exterior RV Step Rugs # PR95FR on your 2022 Holiday Rambler Nautica 35MS. These step rugs will fit your 23" x 11" step and can stay in place when the steps are retracted. The Safety Step Cover # SASSA10-00 you found were designed for use on pull out steps and not the retractable steps like you have on your motorhome. view full answer...
The only step covers we currently offer are from Prest-O-Fit and would only wrap around just the step portion. These covers wrap around the step and tighten in place with springs for a custom fit for a variety of step depths and will allow the steps to extend or retract without any interference. The turf material is designed to take a lot of abuse and can be hosed off when dirty. The rubber backing will help cling to the surface of the steps so you don't have to worry about it slipping... view full answer...
While you can install a Safety Step Sand Away Dirt Trapping Step Cover # SASSA11-00 on each step, you can only leave it on the bottom step when the steps are closed. The middle step covers would need to be removed for the steps to retract.
You could use the Safety Step Sand Away Dirt Trapping Step Cover # SASSA11-00 on the bottom step and then the Prest-O-Fit Wraparound Exterior RV Step Rug # PR57VR for your remaining steps. This should allow you to leave the step covers in place and still... view full answer...
The tire size you list, 235/85R16 will measure 31-1/2" in diameter. I recommend the SnapRing TireSavers Cover, # ST7002BK. These SnapRing TireSavers install by simply sliding the cover over the tire and letting the ring snap together. Includes 2 covers. The are made in the USA of easily washable vinyl.
From the attached image, I see that you are using a step stool for entry. We have the MORryde StepAbove RV Steps for 23-3/4" to 26-1/4" Wide Doorways, # MR26RR available. This step is... view full answer...
The box that covers the struts on the MORryde StepAbove RV Steps # MR75RR measures 4" wide x 6" deep x 14.25" tall which you can see in the attached diagram.
Attached is a review video for you to check out. view full answer...
The Prest-O-Fit 4-Piece Step Rug Set for MORryde StepAbove RV Steps # PR63SR are designed to fit 19-1/2" wide steps like the MORryde StepAbove RV Steps # MR88RR have. You'll just want to measure the width of your steps to confirm fitment. As for the depth, these covers are attached to the step using springs that can easily stretch to fit both your 10-1/2" and 8" depths. view full answer...
That specific portion of the install instructions of the SolidStep Manual Fold Down Steps part # LC791574 refers to the floor covering. Underneath that RVs do all have wood sub floors. view full answer...
We do carry step rugs like the Camco RV Step Run part # CAM42925 which is 18 inches wide and gray in color.
I attached a picture of what these look like when installed as well. view full answer...
Yes, you can absolutely use the Prest-O-Fit Wraparound Exterior RV Step Rug # PR22FR with your TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear # TLA8102.
These wraparound exterior rugs fit straight steps that measure 20" wide and 11" to 8" deep.
This is also available in
-Light brown # PR42FR,
-Green # PR92FR,
-Blue # PR82FR,
-Brown # PR72FR,
&
-Grey # PR54VR. view full answer...
The Classic Accessories PolyPro III Deluxe RV Cover # CA80103 is going to be the best cover we carry for the stock dimensions of your 2023 Mercedes Sprinter 144RV. This cover fits up to 20' long vans that can be up to 9'9" tall. If your van is longer due to a spare tire mounted on the rear door or other parts you would want to step up to the next larger size # CA80104.
The cover can be installed by one person but if you have any roof mounted products you would need to get on the roof... view full answer...
I went out to our warehouse to see how the lens cover is attached on the Replacement Light Kit for Kwikee Electric RV Steps - Amber - 2-13/16" Diameter # LC379414. Although it looks like it could be threaded, that is just a lip to keep it attached. Prying it off is the correct way to remove the lens cover. You will see a cutout on the white backing on either side, which will allow you to use a flat head screwdriver or other tool to remove it. view full answer...
The ThermaHeat RV Holding Tank or Step Heater Pad w/ Thermostat # 277-000164 isn't going to get hot enough to cause an issue with the insulation spray, but I wouldn't recommend it since it would be a pain to remove in the event that it malfunctions and needs to be replaced.
The manufacturer hasn't tested it but recommends not doing it incase the chemicals in the spray foam could cause any kind of damage to the pad or the wiring. view full answer...
Automatic steps, nerf bars, and running boards are all fabricated to fit certain vehicles. The product that you listed, the Lippert Electric Tread Lite Step for RVs # LC353542, is made specifically for RVs.
With that being said, it doesn't look like we have any electric steps available for the 2013 RAV4. However, for extra surface area of 67 inches long and 5 inches wide, the AeroTread Running Boards w/ Custom Installation Kit # AA2061018 is a safe alternative. The installation is easy... view full answer...
The Lippert Components Kwikee 28 Series # LC3747453 only has the step that retracts to cover the motor, linkage, and control module. Although this isn't a perfect seal, it will keep the large debris out but salt will find its way in.
If you don't need the 7 inch drop, we do have the 5 inch drop # LC353620 or # LC353542 which have the motor covered. You can see the measurements for these on the product page to assist with compatibility. view full answer...