The MORryde RV Cargo Sliding Tray # MR64FR only slides one way and has a 60 percent extension. If you're wanting a cargo tray that can slide both ways with the same dimensions then you'll want the MORryde RV Cargo Sliding Tray # MR74FR. view full answer...
So it sounds like you are needing an RV cargo slide out tray that extends at least 50 inches in order to go past your slide and the depth of your refrigerator. There may be an option for you, so long as your cargo compartment is at least 72 inches deep.
If it is, what you can use is a MORryde sliding tray that is 72 inches long. These extend out 80 percent, so it will extend 57-1/2 inches. The correct one will depend on the width of your cargo compartment, and I'll list the options for... view full answer...
The MORryde RV Cargo Sliding Tray - 72" x 33" - 2 Way Slide - 80 Percent Extension part # MR96FR weighs around 110 lbs.
The MORryde RV Cargo Sliding Tray - 60" x 33" - 1 Way Slide - 60 Percent Extension part # MR56FR weighs around 90 lbs.
I have attached our full list of MORryde RV Cargo Sliding Tray options below as well. view full answer...
The only spec sheet we currently have for the MORryde RV Cargo Sliding Tray # MR37FR is just the dimensional drawing I've attached below. Other than the dimensions I can tell you that this sliding cargo tray only slides in one direction, with a 60% extension and has an 800lb capacity. We offer the Height Adjustment Kit for MORryde RV Cargo Sliding Trays # MR34VR as well if you need to raise the tray enough to clear the lip of a cargo compartment. view full answer...
We do not personally design and build the MORryde Rv Cargo Sliding Trays but we do carry two sizes close to your needed 45" x 90" dimensions.
The MORryde Sliding Tray for RV Cargo Compartment - 90" x 42" # MR35FR and the MORryde Sliding Tray for RV Cargo Compartment - 90" x 48" # MR32FR. view full answer...
Yes, since the MORryde RV Cargo Sliding Tray # MR56FR that you referenced has an 800 lb capacity it would easily handle a 450 lb generator. view full answer...
The weight of the MORryde RV Cargo Sliding Tray - 72" x 52" - 2 Way Slide part # MR82FR is around 150 lbs. If you're looking for a lighter option, the MORryde RV Cargo Sliding Tray - 72" x 36" - 2 Way Slide part # MR58FR is a bit smaller and only weighs around 120 lbs. view full answer...
You can go with a listed 29" model of the MORryde RV Cargo Sliding Tray as its actual width is 28-3/4". Please note the attached image showing dimensions of width. We have the # MR69FR that is 90" in length by 29" wide and has a 2 way slide feature that extends 60 percent. I prefer this option as it allows you pull the tray out from either side of your RV cargo area.
Or, for a tray that is 29" wide but 48" in length, you can select the MORryde RV Cargo Sliding Tray, # MR59FR. Select... view full answer...
We have a couple options close to 45 inches long for slide-out tray assemblies that may work for you. These are rail kits that have a 1,000 lb capacity but do not come with the plywood bottom, that is something you would need to configure. The good part about the Kwikee SuperSlide assemblies is that they do allow you to customize the width, and you can choose from the following lengths, depending on the depth of your cargo department.
- 42" Long: Kwikee SuperSlide I RV Storage Slide Out... view full answer...
The MORryde RV Cargo Sliding Tray, # MR69FR is a 90" x 29" - 2 Way Slide that comes only in a 60 percent extension.
There are 72" models of the MORryde RV Cargo Sliding Tray, such as the # MR49FR that has an 80 percent extension, but the longer 90" lengths are 60 percent. view full answer...
The closest option we have is the MORryde RV Cargo Slide part # MR84FR which is 90 by 20 inch and has a 2 way slide like it sounds like you are asking for. view full answer...
We do have RV cargo sliding trays that are 42 inches wide, but none that are 56 inches long, though there are a couple that are close, if you are able to go slightly longer or shorter. The closest available are 48 inches long or 60 inches long, and are from MORryde:
- 48" Long x 42" Wide: MORryde Sliding Tray for RV Cargo Compartment # MR73FR
- 60" Long x 42" Wide: MORryde Sliding Tray for RV Cargo Compartment # MR83FR
Both options have an 800 lb capacity and comes pre-assembled. If... view full answer...
The MORryde RV Cargo Sliding Tray # MR52FR weighs 144lbs. If you also need the Height Adjustment Kit # MR34VR because you have more than a 1-5/8" lip it weighs 13lbs. view full answer...
In regards to the MORryde RV Cargo Sliding Trays, they are offered in a variety of length, 72" and 90" being the two closest to what you're wanting. There is not an option for 80" long. Therefore, I recommend the MORryde RV Cargo Sliding Tray - 72" x 36" part # MR26FR or part # MR58FR. view full answer...
I think what you are looking for is the MORryde RV Cargo Sliding Tray - 90" x 29", # MR69FR and the Height Adjustment Kit for MORryde RV Cargo Sliding Trays, # MR34VR.
Please note the linked product review video below. view full answer...
The cargo tray that you will want for your 33" x 90" cargo compartment is the MORryde RV Cargo Sliding Tray # MR46FR.
The width of the MORryde RV Cargo Sliding Tray - 90" x 33" # MR46FR is 32.74". They list it as 33" but also state that actual measurements are 1/4" smaller in order to fit in the width opening it's listed under. The width is including the sliding brackets and the handle so your 33" opening will work with the # MR46FR tray. view full answer...