Yes, you can replace your current Furrion inlet with the 30 amp Furrion Marine Power Inlet. These are universal fits so it will definitely work, though the mounting holes may be somewhat different, so you can compare yours to the 2-1/4" center to center mounting holes of the Marine Inlet:
- Furrion Marine Power Inlet - 30 Amp # F30ITRGS
I have added a link below to a video review for you to check out as well. view full answer...
The trailer wiring harness you reference, Draw-Tite # 118251, is intended for the Mercury Mariner that is equipped with the factory tow package (but will not fit vehicles with backup sensors built into the rear bumper).
For your 2009 Mercury Mariner without factory-installed tow package the correct wiring harness is Tow Ready # 118551. This part uses a powered converter that draws its power directly from the vehicle battery. It plugs into your Mariner tail light wiring and requires no... view full answer...
Power Grip RV or Household Power Cord Extension # CAM55142 wasn't designed specifically for marine applications but it could still work. However it would have to be kept away from any water since it isn't meant to keep out water. view full answer...
The SmartPlug RV and Marine Power Inlet - 50 Amp - Stainless Steel # SM79FR is ETL listed which, to my understanding, is just a slight variation of UL listed. So while it doesn't have that exact rating, it's still safe to use and has been approved by OSHA standards for electrical use. view full answer...
You are correct, the Furrion Marine Power Inlet # F30ITSBS is a direct replacement for your Furrion F30INSBS. Since you are needing a new power inlet I recommend going ahead and getting the # F30ITSBS due to this.
I included a video of the # F30ITSBS for you to take a look at. view full answer...
Yes the Furrion Marine Power Inlet part # F30ITSBS is compatible with the discontinued Epicord RV Power Cord with Handle # 277-000147. view full answer...
The PD2030 has been discontinued and replaced with the Progressive Dynamics Inteli-Power Marine Converter and Battery Charger - 12V/24V - 40 Amps # PD99RR. Since you're switch from 30 amp to a 40 amp charge you'll also want to increase the wire gauge used running to your battery to at least 8AWG to safely carry the load. view full answer...
Yes, I reached out to my contact at Go Power and they stated the red and black cables of the Go Power Solar Cable Entry Plate with Red and Black MC4 Cables - 25' Long # 34273843REVA are marine grade. view full answer...
Yes, the installation of a power inlet such as the Furrion Marine Power Inlet - 30 Amp - 125V - LED - Square - Black # F30ITSBS is universal and they are interchangeable, assuming you are staying within the same amperage rating.
I have added a link to our entire selection of power inlets as well as a link to a video review of the Furrion Marine Power Inlet # F30ITSBS. view full answer...
I spoke with Camco and they informed me that the Power Grip 90-Degree Locking Marine-Style Power Cord Adapter part # CAM55562 uses an 8 gauge wire for the ground and then the rest are all 6 gauge. view full answer...
The difference is simply what they are rated for and plug into; since you have a 30 amp, to plug into a 30 amp twist lock extension you will need the Power Grip 90-Degree Locking RV/Marine Power Cord w/ Handle - 30 Amps # CAM55532.
If your motorhome was 50 amps you would have used the Power Grip 90-Degree Locking RV/Marine Power Cord w/ Handle - 50 Amps # CAM55572.
This is just an adapter though, and you can plug into a 30 amp source easier with a longer cord, the Power Grip Marine-Style... view full answer...
For the 30AMP Furrion Marine Power Inlet # F30ITSBS 10 gauge wire is recommended for running to your distribution panel/power converter. view full answer...
Yes, the Go Power Heavy-Duty Modified Sine Wave Inverter # 34280175 would work great to power your small fan and charge your cell phone when connected to your 12 volt marine battery. This would need to connect to the positive and ground of your battery but it would not require you to use any additional circuit protection. view full answer...
According to Furrion their Marine Power Inlet # F30ITSBS is rated for 10 gauge or larger wire. So you will be able to use it with 8 gauge wire. view full answer...
The Furrion Marine LED Power Cord Extension part # 432982 is 50' long. It comes with a five year warranty and a storage bag. I have attached a review video for you as well. view full answer...
I recommend the Furrion Marine Power Inlet, # F30ITSBS for black and # 431861 for white. This is a bolt-on installation and tested to marine UL 498 and CSA C22.2 Standards.
Please note the linked product review video below. view full answer...