Unfortunately, the Rack'em Grass Catcher for Scag Lawn Mower with Advantage Deck, part # RCMMS4-OBS1, will not fit your Scag SWZT - 48" - Hero Deck. However, I did speak with a rep from Rack'em and he asked for a picture of your mower's discharge opening and it's measurement across in order to get you the correct grass catcher. view full answer...
The correct grass catcher for your Wright Stander lawn mower is the Rack'em Grass Catcher for Wright Stander Lawn Mower # RCMMS4-BS2.
I have added links to a couple video reviews of this grass catcher for you to check out as well. view full answer...
The holes in the Rack 'Em # RCMMS4-EXS15 grass catcher are right at 3/16th of an inch. I've done quite a bit of research on Centipede grass seed, and have not been able to find anything definitive regarding the actual size of a centipede grass seed, but it's extremely likely that the seeds could pass through the holes in the catcher if they come loose from the stalk.
The catcher will work with an Exmark mower with a 5 inch discharge chute. The mower's discharge opening must be even with... view full answer...
For your Toro Zero turn mower you need the Rack'em Grass Catcher for Toro, Bobcat, and Exmark Lawn Mower Item # RCMMS4-EXS1. If you would like to add a dust cover or extend your basket I recommend the Dust Cover Kit for Rack'em Grass Catchers Item # RA94FR and/or the Extension for Rack'em Multi-Mount Grass Catcher - Aluminum and Stainless Steel Item # RLES25. view full answer...
Since your Toro has the Z-Cut Deck you definitely want to go with the Rack'em Grass Catcher # RCMMS4-EXS1-TORO for a grass catcher. view full answer...
I do have Rack'em Grass Catchers for certain Kubota mowers which you can see listed in the photo below. These mowers will use either the Rack'em Grass Catcher part # RCMMS4-OVBS1 or the part # RCMMS4-EXS1. If the model you have is not listed below then there won't be a Rack'em Grass Catcher for this sadly. view full answer...
Justin, Thank you for the photo. You can use the Rack'em Multi-Mount Grass Catcher - Aluminum and Stainless Steel part # RCMMS4 with the Rack'em Face Plate part # RMBS2 for the Hustler Raptor SDX according to Rack Em. There will not be any brackets or extra parts needed besides the catcher and face plate. I have attached a photo that shows where the grass catcher will attach on the Raptor. view full answer...
The Rack'Em Grass Catcher # RCMMS4-EXS1 is confirmed to fit your Gravely Pro-Turn 252 per the manufacturer.
The Bracket # RB-UN is needed to attach the catcher to your mower but the manufacturer only sells those custom parts directly to the customer.
The grass catcher is light-weight and its design is easy to handle. It has a stainless steel and aluminum construction.
I attached a review video link below. view full answer...
The correct Rack'em Grass Catcher for a Scag 48inch walk behind SW48-14KA is the Rack'em Grass Catcher for Scag Lawn Mower with Velocity Deck part # RCMMS4-OVBS1. view full answer...
I checked with the manufacturer and the correct grass catcher for your Bobcat 52 inch stand-on mower is the Rack'em Grass Catcher for Bobcat Lawn Mower Deck with Built-in Bracket # RCMMS4-RS2.
I have added a link to a video review for you to check out as well. view full answer...
We have grass catchers for several brands of mower including Toro. For your Grandstand 36 the Toro catcher model to use is # RCMMS4-EXS1 along with Toro bracket kit # RBTORO. view full answer...
We have a couple of options depending on your deck. While the Rack'em Multi-Mount Grass Catcher part # RCMMS4 is part of it you need the face plate to match. If your Toro uses the Z-Cut deck use the Rack'em Grass Catcher for Toro Lawn Mower with Z-Cut Deck part # RCMMS4-EXS1-TORO if it uses the standard deck use the Rack'em Grass Catcher for Toro, Bobcat, and Exmark Lawn Mower part # RCMMS4-EXS1.
There is an extension available for it as well to reduce the dump frequency with the Extension... view full answer...
For your Toro Zero Turn lawnmower you will need the Rack'em Grass Catcher for Toro, Bobcat, and Exmark Lawn Mower Item # RCMMS4-EXS1. If you would like to add a dust cover or to extend the basket I recommend the Dust Cover Kit for Rack'em Grass Catchers Item # RA94FR and/or the Extension for Rack'em Multi-Mount Grass Catcher - Aluminum and Stainless Steel Item # RLES25.
If you have any further questions please feel free to reach back out to me anytime and I would be more than happy to... view full answer...
Your Toro Timecutter should have the Z-Cut deck. I have attached a picture below so you can confirm. You will want the Rack'Em Grass Catcher for Toro Lawn Mower with Z-Cut Deck item # RCMMS4-EXS1-TORO. The custom face plate provides the connection point needed to attach the catcher to your mower. The catcher design is light-weight and easy to handle.
If your Toro does not have the Z-Cut deck you will want the Rack'Em Grass Catcher for Toro, Bobcat, and Exmark Lawn Mower item # RCMMS4-EXS1. view full answer...
According to Rack 'Em, the chute blocker would need to be removed to install the # RCMMS4-EXS15 grass catcher. I was told that it might be possible to make some modifications to the blocker or the grass catcher in order to get them to work together, but my Rack 'Em representative didn't have any specific details available as to how exactly this would be done.
I've linked you to a product description video featuring the # RCMMS4-EXS15 grass catcher. view full answer...