I spoke with my contact at Rack'em and was able to verify that the Backpack Blower Adapter # RA-STIHL referenced in your question is indeed compatible with your Stihl BR-700 Backpack Blower.
This adapter kit will work great with the Pack'Em Rack for Open Utility Trailers # PK-6-OP1 to hold your blower. This is a really great system that will allow you to load up your trimmers and backpack blower to your open trailer. I have attached a couple of short video demonstrations on this product... view full answer...
You will not need an adapter for your Shindaiwa EB802RT backpack blower to use on the Rack'Em Lockable Blower Rack # RA-19. This is the same rack that comes in the Pack'Em Rack for Open Utility Trailers Kit # PK-BM-OP1. view full answer...
If you have a backpack blower that needs an adapter for a Rack'em racks, like the # RA-4 and # RA-19, then you will need either # RA-STIHL or # RA-STIHL420.
The # RA-STIHL is designed to work with Stihl backpacks BR350, BR430 BR550, BR600, ECHO, or RedMax Blowers.
The # RA-STIHL420 is designed to be used with Stihl backpacks BR420 and 320.
I spoke with Rack'em who said the easiest way to determine if you'll need an adapter or not is if the handle of your backpack blower points towards... view full answer...
The PackEm Rack for Open Utility Trailers, part # PK-6-OP1 uses a backpack blower holder that is designed to securely grip your blower at its grab handle. Simply hang your blower from the hook and then fold down the integrated steel arm. Once the arm is properly positioned over the hook, you can lock it in place with one of the included keyed-alike padlocks.
If you have a STIHL BR420 model backpack blower you will need to purchase an additional adapter for it to be used on the PackEm Rack.... view full answer...
Unfortunately, the backpack blower rack is only available as part of the Pack'Em Expansion Pack, part # PK-OP1.
This kit holds a blower, a trimmer line spool and a cooler. I wish these were available as a separate item but they are only available in the kit. view full answer...
The Pack Em Rack, # PK-6-OP1, will hold an Echo backpack blower, but you will need to use the Rack Em Backpack Blower Adapter, # RA-STIHL.
To attach to the blower frame, the tubing must be slit lengthwise and wrapped around the frame before attaching the adapter plate with the 2 small U-bolts. The tubing will protect the frame and help hold the plate in place. Tighten the lock nuts until the plate starts to compress the tubing and it is held securely in place. Do not over tighten. Make... view full answer...
Adapters are required for STIHL 420, 550, and 600, ECHO or RedMax backpack blowers but not for other models such as your Hasqvana. You should not have any problems using it on the Pack Em Rack # PK-6-OP1. view full answer...
For just a single blower pack rack you would want the part # RA-4.
The Rack Em Backpack Blower Rack measures 41-3/8 inches tall, and 19-3/8 inches wide. Measuring from the top of the rack downward, the mounting holes are at 7-1/2, 17-3/8, 27-1/4 and 37 inches. The distance from the hook at the top of the unit down to the bungee strap used to retain the blower is 17 inches. view full answer...
The Pack'Em Expansion Pack # PK-OP1 has not been fitted for compatibility with your specific Husqvarna backpack blower 570 according to the manufacturer. However, the only models that have confirmed need of an adapter are the STIHL 350, 550, 600, ECHO, or RedMax models requiring # RA-STIHL. view full answer...
The Lockable Blower Rack for Utility Trailers, # RA-19, is designed to accommodate most backpack leaf blowers. At this time, only certain Stihl models are known to require an adapter (BR420, BR550, BR600). I checked with Rackem and Echo model PB-755ST does NOT require an adapter.
For installation Rackem states that for all open trailer racks you will first place the rack tower on the trailer floor flush against the trailer SIDE rail. Then drill the holes in the trailer SIDE rail using... view full answer...
According to Rack em, the ECHO PB-500T does not require an adapter but they do not list the PB-500H so an adapter would be needed. The adapter that fits Stihl and Echo models is # RA-STIHL. view full answer...
Yes! According to my technical contact at Rackem, your Stihls Backpack Blower BR200 will fit Rackem # RA-19. You will not need any additional adapters or brackets. view full answer...
Yes, you will need the Rack'Em Backpack Blower Adapter part # RA-STIHL to carry your Stihl BR 430 on the Pack'Em Rack for Open Utility Trailers # PK-6-OP1. view full answer...
The Pack'Em Blower Rack # PK-6-OP1 that you referenced will accept your Stihl BR340 Backpack Blower when used with the adapter kit # RA-STIHL. This carrier is not a fit for your Husky BT350. view full answer...
You will need the Adapter # RA-STIHL for your ECHO 9010 backpack blower to fit on the Pack'Em Rack for Open Utility Trailers # PK-6-OP1. And you will have no problem mounting this to your 7x14 landscape trailer with the 12" sides. view full answer...
Assuming that you have an open utility trailer, the Pack'Em Trimmer Rack, # PK-6, would work great to hold your two trimmers. 4 keyed-alike padlocks are included to secure your trimmers to the rack.
I spoke with my contact at Pack'Em and currently there are no racks available that are specifically made for a handheld blower. They do offer an Expansion Pack, # PK-OP1, which includes a mount for a backpack blower as well as a trimmer line spool and round cooler. You may be able to use the... view full answer...
Yes, I checked out the Ryobi BP42 and the Rack'em Back Pack Blower Rack # RA-4 or the utility trailer blower rack # RA-19 would work with it just fine. view full answer...
I reached out to a representative of Rack 'Em who told me that a Stihl BR350 blower does NOT need an adapter to fit on the Lockable Blower Rack for Utility Trailers # RA-19. view full answer...
The plastic tube is slit down the middle and wraps around the frame or handle on the STIHL BR550 or BR600 Blower. The large hole on the top of the Rack'em Backpack Blower Adapter, # RA-STIHL, goes on the hook of the Back Pack Blower Rack, # RA-4.
One threaded end of a u-bolt goes through the small round hole, while the other threaded end goes through the long oval hole. You do the same with the other u-bolt. On the other side of the plate, the u-bolts go through the small rectangular plates,... view full answer...
You shouldn't have any issues using it on the Pack'Em Rack for Open Utility Trailers, Part # PK-OP1.
Adapters are required for STIHL 420, 550, and 600, ECHO or RedMax backpack blowers but not for other models such as your BR200. view full answer...