From your RV information, I was able to determine the correct rear anti-sway bar is the Roadmaster Rear Anti-Sway Bar # RM-1139-146. We do have the replacement bracket/shackle and bushing for that anti-sway bar.
- Replacement 12-5/8" Shackle for Roadmaster Anti-Sway Bar Kits # RM-B404 view full answer...
The Replacement 12-5/8' Shackle for Roadmaster Anti-Sway Bar Kits # RM-B404 that you mention is the correct replacement for the Roadmaster Front Anti-Sway Bar Kits 1169-110, 1169-208, and 1169-212, as well as the rear anti-sway bar kit RM-1139-149.
These kits are not the correct kits for your 2005 Freightliner M2, and in turn, the shackle mentioned won't be compatible with your vehicle.
Unfortunately, the shackle in the rear anti-sway bar kit like the Roadmaster Rear Anti-Sway Bar #... view full answer...
For your Roadmaster Front Anti-Sway Bar # RM-1139-148 on your 2014 Ford F-53, the correct replacement bracket is the:
-Replacement Bushing Clamp for Roadmaster Front Anti Sway Bar # RM64MR.
This bracket will not fit the rear sway bars # RM-1139-146, for that your need the Roadmaster Polyurethane Bushing Kit for 1-1/2" Diameter, Factory Rear Anti-Sway Bar # RM-4139-125. view full answer...
What vehicle are you needing this for? It looks like you have a 2019 Ford E-Series in our fitguide but if you could let me know if it's an E-350 or E-450 and whether you have a Class A motorhome, Class C motorhome, or an Emergency Vehicle I can see what else you might need. view full answer...
Assuming that you're needing the steel U-clamp and replacement bushing for a Roadmaster # RM-1259-105 front anti-sway bar installed on your motorhome built on a 2003 Workhorse W22 Chassis, the replacement U-strap is part # RM-B141 and the replacement bushing is # RM205222-10.
I'm unsure of what steel sleeve you're speaking of. If it's part of the OEM front sway bar, we unfortunately don't offer replacements for those. view full answer...
I checked with Roadmaster, and there are a couple of different bushings, depending on what you needed, for the Roadmaster Front Anti-Sway Bar and TruTrac Rod Kit # RM-1259-106. The correct replacements are the following:
- Roadmaster Split Bushing for Anti-Sway Bar # RM205222-10
- Replacement Polyurethane Bushing for Roadmaster Anti-Sway Bar # RM-205209-00 view full answer...
The Roadmaster Front Anti-Sway Bar # RM-1139-189 you referenced only comes as a complete kit. We don't have the bushings or bar available separately. This is the fit for the 2016 Ford E-450 but not the same year F-450 you have in the question fit guide. For the F-450, you would instead use Roadmaster Front Anti-Sway Bar # RM-1139-179. This is a 1-1/2 inch bar and is confirmed to fit. view full answer...
We do have bushings for your 2004 Fleetwood Southwind front anti-sway bar. If you have the 1-1/2" diameter anti-sway bar you need the Roadmaster Polyurethane Bushing Kit # RM-4139-125. If you have the 1-5/8" you need the # RM-4139-127. Both include the 2 bushings and the necessary hardware for installation. view full answer...
Based off of my research, your 2004 Fleetwood Revolution 40C was built on a Freightliner XC chassis, and would use the Roadmaster Rear Anti-Sway Bar # RM-1209-115. In that case, the replacement bushing you'll need is the Replacement Split Bushing for Roadmaster Anti-Sway Bars with 1-1/2" Diameter Bars # RM-205217-10. view full answer...
It sounds like you're looking for the Replacement Bushing for Roadmaster Front Anti-Sway Bar for Motor Homes - Qty 1 # RM-205393-00, which you'll need 8 of.
For the bushings that fit around the bar you'll need the Roadmaster Polyurethane Bushing Kit for 1-3/4" Diameter, Factory Rear Anti-Sway Bar # RM-4109-106 for a complete set with mounting hardware. view full answer...
The Roadmaster rear anti-sway bar # RM-1109-168 replaces the factory bar on your 2002 Chevy Tahoe. There is no drilling or modifications needed to install the new bar. I have included a link to the installation instructions for you. view full answer...
I was able to track down some possible solutions for you!
I went ahead and checked out the Roadmaster Rear Anti-Sway Bar # RM-1139-149 system, for your 2011 Forest River Georgetown Motorhome, and discovered that this system use both a 5/8" locknut # 6-38, and a 1/2"-13 locknut # 12ZLN.
If you have just the Roadmaster Front Anti-Sway Bar # RM-1139-148, then you'll just need the 1/2"-1 locknut # 12ZLN. view full answer...
For a replacement polyurethane bushing for a 1-1/2 inch diameter Roadmaster rear anti-sway bar, you'd want to use part # RM-205217-10. This is a split bushing, which means you can place it right where you want it, without having to struggle with sliding it into place. view full answer...
I reached out to Roadmaster and they do not offer any replacement end links for the Roadmaster Rear Anti-Sway Bar # RM-1139-165 on your 2000 Ford F-350.
They only offer an End Link Kit # RM-590230-00 for the Roadmaster Rear Anti-Sway Bar # RM-1139-153 which is for the non-dually version F-350 without a factory sway bar. view full answer...
You've actually found the correct part. The Replacement SuperCush Anti-Sway Cradle and ZipStrips for Yakima Hanging-Style Bike Racks # 8880598 is the correct part to replace the anti-sway cradle on the Yakima Ridgeback models manufactured after 2016 ( # Y02458). This can be installed on either side of the rack and are not side specific- they're a universal replacement, and it should just slide right on to the bar in place of the old one without any issues. view full answer...
Yes, you can get the anti-sway cage for your Thule Passage trunk mount bike rack # TH910XT. The part you need is # 853-7758 and it fits the Stay-Put cradles on your Passage bike rack. The strap is sold separately, # 852-3006-001. view full answer...
The Roadmaster Rear Anti-Sway Bar # RM73FR does not have any adjustability but it is going to provide you with a huge improvement in handling and body roll reduction that you won't want to adjust any aspect of it. view full answer...
The correct replacement anti-sway strap for a Thule Apex XT Bike Rack like part # TH9024XT is the Replacement Anti-Sway Strap part # 1500056004 which is the only length available. view full answer...
In order to replace one of the ends on the Roadmaster Rear Anti-Sway Bar part # RM-1139-149 you'll need two of the Replacement Polyurethane Bushings part # RM-205209-00 and one of the Replacement Metal Sleeves part # RM-205503-00. view full answer...