We do! To get replacement hardware you need the part # RHK, which is a complete hardware kit.
It looks like you were looking at the Curt Trailer Hitch # C13144 for a 2016 Subaru Forester so if that's the case you just need to input the hitch number, 13144, into the box on the RHK hardware page and we'll send everything out to you!
If you're only missing a few bolts then it'll honestly be more cost-effective to pick up some 1/2"-13 x 1-3/4" bolts from your local home improvement or hardware... view full answer...
You're looking for the Replacement Lid Support for Yakima Cargo Boxes # 8880683, which will be the direct replacement for your broken Yakima support. You can re-use the hardware from the old hinge. view full answer...
We don't have a kit for the RIde-On Adapter TH532 without the crossbars, but we do carry all of the parts individually.
4 of the # 915-0625-54
4 of the # 853-2154
4 of the # 853-2156
4 of the # 853-5267
4 of the # 753-2854
4 of the # 936060054
4 of the # 853-5269
8 of the # 853-5293
1 of the # 853-5270-02
1 of the # 853-3593 view full answer...
I took the liberty of looking up your previous order, and see that you ordered the Curt Class II hitch, part # C12100 which fits the 2014-2018 Subaru Forester.
For replacement hardware, you'll need our replacement hardware kit, part # RHK. On the # RHK product page, simply type 'C12100' into the provided field, choose 'Curt' from the drop down menu and add the kit to your cart. view full answer...
I'm not seeing a part number on the sticker shown in the photo, but if the hitch is part # C13409 it will fit a 2019-2021 Subaru Forester. The hitch part number might be located elsewhere on the hitch, and would be indicated by a 5 digit number beginning with the number 1.
If that's what you have, you can obtain replacement hardware using our # RHK kit. Click the provided link, and on the product page type 'C13409' into the provided field, then choose 'Curt' from the drop down menu.
If... view full answer...
To order replacement hardware for a trailer hitch the part number you need is # RHK. On the product page of # RHK you'll select Draw Tite from the drop down menu and then enter part number 75876 and we'll ship you out the correct hardware. view full answer...
According to my contact at Dometic, that thermostat is no longer available as a replacement part. Unfortunately, this means the only solution is to replace the entire fan.
I recommend the Fan-Tastic Vent Roof Vent # FV803350. This has 3 manual speeds, a rain sensor, powered arm, and a thermostat. If you would like to have a remote we also have the # FV807350. This has the same features as the other fan but adds the digital remote as well as 13 speeds. view full answer...
Your photos did not come through, however, I believe I have the solution you are seeking. You can replace the lock cylinder and key by using the Thule One-Key System Lock Cylinders # TH450200. If you can't remove the broken key then you will need to drill it out. If you have the really old style lock, then you will want # SR03807.
For your mounting u-bolts, you will want the Replacement Hardware Kit for Searsbox Cargo Box # TH05603. view full answer...
The Replacement Lock Cap # SR05016000000 referenced in your question is just the outer cap and does not include the plastic lock cylinder. I spoke with my contact at SportRack and she stated that the lock cylinders for this unit are not available as replacement parts.
This cap is designed to fit the SportRack Frontier Roof Rack (SR1009). view full answer...
Yes there is!
The Yakima DoubleDown Ace 4 Bike Carrier Y02451 fits both 1-1/4" and 2" hitches but if you do not have the adapter sleeve you need Replacement Adapter Sleeve # Y8890342. This will allow your DoubleDown Ace to be used with a 2" hitch. view full answer...
We have exactly what you need with the Easy Grease Trailer Idler Hub Assembly for 2K Axles # AKIHUB-545-2-G-EZ-2K.
This has the 5 on 4-1/2" bolt pattern, uses L44649 inner and outer bearings, and a grease seal with a 1.50" inner diameter. This hub also has the galvanized finish which helps fight rust and corrosion from water better than the standard powder coat finish does.
Attached is an installation video for you to check out. If you are also needing tires and wheels just let me know... view full answer...
The Curt hitch part # C47HR that fits your 2024 Subaru Forester would not void the warranty. With aftermarket products like this hitch you are protected by the Magnuson Moss Act which basically says that Subaru would have to prove the hitch voided the warranty and couldn't claim the hitch by itself automatically voids it. view full answer...
The closest alternative we offer for the # C18115-FAR replacement fairing would be the Rhino Rack # RRRF3 which is 44 inches long as opposed to the Curt # C18115-FAR which is 1 inch longer. The problem you'll run into by attempting to use a different fairing is that the mounting holes won't line up.
I'd recommend going with the fairing that was designed for use with your basket, the # C18115-FAR. view full answer...
We do have replacement hardware available for the Curt # C13409. What you need is the Replacement Hardware Kit for Trailer Hitches # RHK. All you need to do is enter the C13409 item number in the field labeled "Hitch Item Number" and add to cart. view full answer...
Good news! I can help you get the correct Draw-Tite hardware for your 2017 Subaru Forester trailer hitch.
The Draw-Tite # 75876 is confirmed to fit your vehicle. This will be the number for the "Hitch Item Number" you will place in the box on the Replacement Hardware Kit # RHK product page. Then simply pick the Draw-Tite manufacture from the drop down box and then hit the add to cart button. This will get you all the correct original hardware so that you can install your hitch to your... view full answer...
The etrailer Trailer Hitch Receiver # e98839 for your 2015 Subaru Forester uses 1/2" mounting bolts. You will need the Fish Wire Bolt Leader # C58400 if you do not have the ones that come included with the receiver.
If you are in need of new hardware the Replacement Hardware Kit # RHK will allow you to get all the hardware for the receiver. view full answer...
All you need to attach the Thule Snowpack to a non Thule bar would be the SpeedLink Mounting Hardware Assembly # 7521241001. This will be all you need unless you have square bars. If you have square bars you will need the Thule SquareBar Adapter # TH8897 view full answer...
The upright arm on the Thule T2 Pro XTR Bike Rack for 2 Bikes part # TH83JV can be replaced yes, that said you must buy this as an assembly with the tray. The Replacement Spar Tube Assembly for Thule T2 Pro XT part # 7524703001 for the one closest to the vehicle or the Replacement Spar Tube Assembly for Thule T2 Pro XT part # 7524703002 for the one furthest from the vehicle is all that Thule offers. view full answer...
Yes, we do have the Replacement Key HF321 # GL69FR. This key works with FIC entry and baggage doors on rv's and is compatible with the HF321, EF321 and CF321 locks. view full answer...
The Replacement Seal Strips for Yakima SkyBox Series Rooftop Cargo Box 2006 and Newer - Qty 4 # 8870086 is a fit for 2006 boxes and newer. It will fit models # Y07337, # Y07336, as well as the discontinued boxes Y07198 and Y07197. view full answer...