The only double-eye spring set we have available that matches the length of your existing springs and your axle capacity is the 6-Leaf # e27SR. This particular double-eye spring features a length of right at 26" from the center of one eye to the other and is designed for 4,500 pound axles.
Since this is a 6-leaf stack though you would need to replace the other springs on your boat trailer to match so the height isn't thrown off. If the leaf springs are as old as the trailer it might be... view full answer...
If the code number on the lock of your Sears X Cargo Sport 20-SV Cargo Box is 2826, you'd need the Thule Replacement Key, part # THKEYN2826.
The keys are sold individually. view full answer...
You're in luck! The 2013 and 2015 Chevy Silverado 2500 use the same frame brackets. Assuming you already have the bed rails and the frame brackets, but only need the hardware, here's what you'd need:
To install the brackets to the truck frame, you'll need the # RP50066F hardware kit. To attach the bed rails to the frame brackets, you'll need the # RP58430 hardware kit.
I've linked you to the installation instructions for the install kit (in case you don't have them any more) as well as... view full answer...
I wish you could transfer different parts from your TracRac TracONE # TH27000XT to use for the TracRac SR # TH43002XT-781 but none of the uprights are the same so it would be more cost-effective to get the whole ladder rack instead of trying to piece things together. On the bright side of that though you would be able to sell your whole TracONE ladder rack to help offset some of that cost.
You will be able to use the TracRac SR with the BAK Revolver on your 2016 Chevy Silverado 2500, and... view full answer...
The Ram 30K 5th wheel hitch is a Curt # C64BR branded with the Ram emblem for OEM factory prep systems. This will allow you to use the Curt OEM 5th Wheel Hitch Legs # C16024 with what is essentially your Hitch Head # C16590 on your 2022 Chevrolet Silverado 2500. view full answer...
I can't tell from your description and picture WHY it became bent. It is difficult to tell which part(s) are damaged from your picture so I will list out the available replacement parts for you to choose from:
Curt # C16429-204 Under Bed Bracket AND In Bed Base Rails
Curt # C16204 In Bed Base Rails only
Curt # C16570 Roller (R24 Slider Base)
Curt # C16565 Head Unit (Q25 Top) view full answer...
Black or white are the OEM colors for the idler head. The Replacement Solera Manual Awning Head Cover Fastener - #6 x 1/2" Screw - Qty 1 # LC266156 is what you are seeking. You will need 6 of them for each head assembly. view full answer...
In order to find the correct replacement slipper spring you will need the length, width, and the capacity. The leaf count does not indicate capacity and is not important when determining a replacement. This information would also make a difference in the mounting hardware.
For example, the 4-Leaf Slipper Spring w/ Open Eye End # e24SR is 27" long, 1-3/4" wide, and designed for 4,300 lb axles. Assuming a single axle, you could use the # APS3SE and # APUBR-1 (this is for a 2-3/8" diameter... view full answer...
The Replacement Shock for Trailair Air Ride and Flex Air 5th Wheel King Pins part # LC177223 is as it appears in our photos. Check out the linked photo from one of our customers that has installed two of them on his king pin. view full answer...
The Rapid Hitch Trailer Hitch Lock and Adjustment Pin Lock Set for 2" and 2-1/2" Hitches # AM3492 does have replacement keys available. If you have the key number that is only listed on the key, we can help. We currently have many key options and I've attached a link to that product page for replacement keys. If we don't have your key number let me know and we most likely can get it.
If you don't have the key number, then you will need to drill out the lock cylinder and replace the... view full answer...
The Miro-Flex Thinline LED Trailer Clearance or Side Marker Light - Submersible - 4 Diodes - Amber Lens # MCL63AB can't have the inside replaced. You would need to replace the entire LED light. Before replacing the light, you want to make sure you don't have a wiring issue. You can test the light with a 12v battery, or you can test the wires using a circuit tester like # PTW2993. view full answer...
Yes, the motor for the Lippert Components PSX2 Electric RV Stabilizer can be replaced without obtaining an entire new system. The Replacement Motor and Gear Box Assembly for Lippert Components PSX2 Electric RV Stabilizers part # LC759091 is what you will need for this. The motor and gear box assembly come as one unit and must be replaced together.
I suggest keeping one spare motor/gear box on hand so you never have any down time but if worse comes to worse you can still operate the jack... view full answer...
Yes, the base of your B&W Companion 5th wheel hitch can be swapped out with either the fixed # BWRVB3710 or sliding base # BWRVB3775 in order to mount the hitch in the bed of your 2020 Chevy Silverado 2500 puck system. If you have a B&W Patriot or another base rail style hitch you can also just use an adapter like the Curt # C88KR to connect to the puck system. view full answer...
You're looking for the Base Rails # TH21781 which fit the Thule TracRac SR # TH43002XT-781 for your 2020 Chevy Silverado 2500HD with the 6-3/4' Bed. view full answer...
From what I could find, the Extang Tuff Tonneau for your 2015 Chevrolet Silverado 2500 with regular (6-1/2") bed is the 14450 cover. The correct replacement tarp for that cover is the Replacement Tarp for Extang Tuff Tonno Roll-up Soft Tonneau Cover # EX13450.
I do recommend verifying the 14450 is the cover that you have. You can do this by locating the part number. The part number is typically stamped along the underside of the cover, typically located at the driver side cab corner. view full answer...
For a replacement passenger side tail light for your Towsmart LED light I recommend using the LED Combination Trailer Tail Light - Submersible - 7 Function - 18 Diodes - Square - Passenger Side # STL2RB because of the high quality you get with Optronics lights (check out all of the 5 star reviews). This light measures 6-1/8" long x 4-9/16" tall x 2-7/8" thick and is submersible, so it would also work on a boat trailer if that is your application. If you also need a driver's side light you... view full answer...
Thanks for providing the VIN, that made all the difference!
After contacting Jayco, then being referred to Lippert, who manufactured your RV frame, I've found that your Jayco has a Lippert 1621 pin box. Therefore, if you were needing a 5th Airborne Premium 5th Wheel Air Ride King Pin w/ Sidewinder to replace your existing pin box, the # RP61422 you'd looked at would work perfectly for you.
I've linked you to an installation video which I hope you'll find helpful. view full answer...
It sounds like you are looking for a new motor for an RV slide out.
I checked with my contact at Lippert Components, which makes the majority of OEM trailer and RV frames and slide-outs, and they do indeed have a direct replacement motor. You will want to order item # LC386321.
My Lippert contact as able to confirm this item is the correct replacement based on the part number you provided. view full answer...
The Extang # EX1032 replacement hinge that you referenced is made for Extang Trifecta and Extang eMAX folding tonneau covers as a hinge replacement. I reached out to my contact at Extang and found out that they also make the Gator covers and that this hinge will work with Gator brand covers! view full answer...