Expert Answers about Chevrolet Express Van

• RV City Water Intake Valve with 3/4 Female Fittings On Both Ends
• I recommend using the Valterra Water Inlet for RVs with Metal Recessed Flange # A01-0178LFVP or the # A01-0169LFVP which has a Plastic Recessed Flange. Both of these inlets have the female connection on both ends that you're looking for and will work as a replacement for your NSF-61-G-784-MBC connector.
  view full answer...


• Availability of Replacement Hardware for Longview Custom Towing Mirrors # LVT-1700
• Yes, you can purchase an extra set of hook and knobs for your Longview Custom Towing Mirrors, part # LVT-1700. You would need to order the Longview Replacement Hardware Kit for LVT1700 Towing Mirror, part # KLV-1710. This kit will include 2 hooks and 2 knob for two mirrors.
  view full answer...


• Generac Tailpipe And Spark Arrestor Availability For RV Generator
• The Generac tailpipe 0E0683 that you are looking for has been discontinued, although you may have luck finding an alternative tailpipe with similar specs. It has an inside diameter of 1-1/4" and appears to measure 11-3/4" long according to my research. The closest thing we have is Camco Gen-Turi Replacement 30" EMT 90-Degree Discharge Pipe # CAM44812. The smaller end had ID of 1.37" and OD of 1.5", while the flare end measures 1.53 ID to accept a 1-1/2" pipe. It measures 30" long but could...
  view full answer...


• Replacement Side Mirrors For a Class C RV On 2024 Chevrolet Express Chassis
• We do have the Driver # KS62170G and Passenger # KS62169G side mirrors. These are the common style mirrors used on your 2024 Chevy Express Chassis for RV's.
  view full answer...


• Switching From Surge to Electric Brakes on 1996 U-Haul Trailer
• Assuming you're right about the current drum size you will need 10" brake assemblies, not 12". You can use the Electric Trailer Brake Kit # AKEBRK-35-SA. These fit a 4-bolt brake flange pattern and are typically found on 3,500 lb axles. I recommend verifying this with what you have to be sure. You will also need to add the # H20046 for wiring and the # HM20001 for a breakaway. You can lock out your surge coupler to avoid replacing it. If you don't have a 7-way on your 2000 Chevy Express...
  view full answer...


• Replacement Passenger Side Towing Mirror For a 2010 Chevy Express Class C RV Chassis
• The K-Source Custom Towing Mirror # KS62169G has an overall measurement of 21" from the bottom of the mirror attachement to the far edge of the mirror. This is our longest custom fit mirror which will fit a 2010 Chevrolet Express Van. It fits the passenger side and is a manual adjustment. Our universal mirrors only reach out a maximum of 17" making them a worse option than the custom mirrors.
  view full answer...


• Needing a Replacement Red Clearance Light Lens That Measures
• I found a replacement lens for you. You will need the Bargman Light Lens # 34-59-010. This lens is a red clearance light lens that measures 4 inches L X 2 inches H x 5/8 of inch deep.
  view full answer...


• Replacement Hook Arms and Locking Nuts for the Longview Custom Towing Mirrors # LVT-1700
• I believe that the hook arms and locking nuts for the Longview Custom Towing Mirrors # LVT-1700 that you referenced is the Replacement Hardware for Longview Towing Mirror LVT-1700 # KLV-1710.
  view full answer...


• Replacement Tail Lights on Malone Microsport XL Kayak Trailer
• Yes. The tail lights on the Malone Microsport trailers like the # MPG460XT are submersible. You can use the # STL28RB & # STL29RB to replace these lights with another submersible light or go with a completely sealed and waterproof light set with the # TLL9RK. I do recommend going with the # TLL9RK waterproof lights just because of the added protection and durability you get with this application.
  view full answer...


• Replacing a Lippert 3,500 lb Leaf Spring Axle with a Dexter 3,500 lb Leaf Spring Axle
• The Trailer Axle, part # e43SR, is similar to the Lippert LC135-SB-85.0-68.5 axle, but it is not a direct replacement. Both axles are 3,500 lb leaf spring tubular axles, but they are different lengths. The Dexter axle is slightly longer, which means the wheels would stick out further and the spring center is wider. Your axle has a hub face measurement of 85 inches and the Dexter axle has a hub face measurement of 89 inches (see photo). The wheels will stick out about 2 inches further on...
  view full answer...


• Replacement Gas Detector for an Atwood Series 2001 LP Gas Detector
• I tried finding information on the blinking green light on your Atwood Series 2001 LP Gas Detector but was unable to find anything that mentioned a blinking green light. The Atwood Series 2001 LP Gas Detector you have is no longer available which is likely why it was difficult to find information. The Atwood Series 2001 LP Gas Detector does have a life cycle of 7 years +/- 128 days. This starts once the detector is first started up. If you believe you are close to or passed that 7 year...
  view full answer...


• Replacement Gear Drive Head Pin for Solera 69" Awning on 2018 Grey Wolf 26RR
• You are correct. The Replacement Head Pin for Solera Power Awning Gear Drive Head # LC93FR is the exact replacement for the bent pin on your Solera awning.
  view full answer...


• Replacement Running Board Lights For A 2003 Chevy Express 1500
• Like the Custer Rubber Grommet # G65G, all the oval grommets we currently carry will be designed to fit a 6-1/2" light, like the Optronics LED Trailer Tail Light # STL72RB. However, we do have the Replacement Lenses and Housings # 27-9904, Replacement Light Housings # 27-9902, Replacement Wiring Harness # 27-9903, and Replacement Bulbs # 27-9905 that are designed to fit the Westin Molded, Lighted Running Boards # 27-0015. These do look remarkable similar to your lights, but will measure...
  view full answer...


• Replacement Spring Bars for Equal-i-zer 10,000 Lb Rated Weight Distribution System
• We do offer the replacement spring bars for the Equal-i-zer 10,000 GTW/1000 lb TW weight distribution kit as part # EQ90-01-1099. The bars are sold in pairs. These will replace missing spring bars for a 10K GTW/1K TW Equal-i-zer system, but they CANNOT be used to upgrade a lower rated system as the weight distribution head is different and the bars aren't interchangeable. If you're needing to upgrade from a lower rates system, you'll need a new system like # EQ37100ET.
  view full answer...


• Parts Needed to Install Brake Controller in 2017 Chevy Express Van without Trailer Wiring
• You will need to start with a 4-way. For that you would want the # 118392. From there you would need to convert the 4-way to a 7-way so that you can install the Tekonsha Voyager brake controller # 39510. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well.
  view full answer...


• Solution for Replacement Key for Reese Coupler Lock
• Although replacement keys were once offered from this manufacturer, they are no longer available. Your only option if you no longer have a key is to replace the coupler lock. For a replacement I recommend the Fastway Universal Trailer Coupler Lock for 1-7/8", 2" and 2-5/16" Couplers # FA86-0015-318. This lock has a universal design as well as a tube key lock cylinder provides better security than standard key mechanisms. It also features an anti-drill pin and a bolt-blocked locking system...
  view full answer...


• Replacement Upper Bracket Recommendation for Air Lift Kit part # AL57245
• Yes, the part you need is the replacement upper bracket part # AL07847. I checked with Air Lift and they have this listed as the correct replacement upper bracket for the # AL57245 that you referenced.
  view full answer...


• Parts Needed to Install a Brake Controller in a 2002 Chevy Express Van
• We would be happy to explain how to install a brake controller like # 5504 or # 90885 on your 2002 Chevrolet Express Van but there isn't a pig tail that will fit your van. You will need to hardwire in the brake controller. If your van came with a factory 7-Way trailer connector the blue output brake wire already ran from the back to the front. It is located under the dash near the emergency brake pedal. But the other 3 brake controller wires will need to be hard wired in. The white...
  view full answer...


• Recommended Replacement Trailer Tires for 8.75R16.5 Tires
• The 8.75 R16.5 size tires you're looking for are normally used for passenger-type vehicles which have more flex in the sidewall for better ride quality but trailer tires have a stiffer sidewall which helps to better stabilize heavier loads that trailers are normally subjected to. For your application I recommend checking out the Provider ST225/75R15 Radial Trailer Tire # TR225LRE which has similar dimensions to your current tires and is a Load Range E (2,830 lbs at 80 psi) with an 81 mph...
  view full answer...


• Swinging Arm Replacement for Yakima EXO Enclosed Cargo Carrier
• Yes, we have just what you need. The Yakima EXO SwingBase Swing Away Hitch Extender - 2" Hitches Item # Y34VR is a complete arm assembly for the Yakima EXO Swinging Enclosed Cargo Carrier for 2" Hitches # Y62VR.
  view full answer...