Expert Answers about Toyota Land Cruiser

• Parts Needed to Convert a Boat Trailer from Surge to Electric Over Hydraulic
• As long as the frame on your Hoosier trailer is 3 inches wide and no more than 5 inches tall, you will be good to go. The Fulton XLT Powered Drive Trailer Jack # F141401 will fit a 3"x3" to 3"x5" frame and the Buyers Products Straight Tongue Trailer Coupler # 3370091562 will fit a 3" wide tongue, so as long as your trailer matches this, these will definitely be good options. With that being said, I do always suggest using a break away system and this will require a battery to be mounted....
  view full answer...


• 2004 Toyota Land Cruiser Rhino Rack Roof Rack Compatibility
• I recommend the 2004 Toyota Land Cruiser Roof Rack by Rhino Rack, part # RRVA137B-2, and part # RRSX100. I like this rack because the bars extend beyond the towers. This makes your roof rack more flexible since you can mount items inside of the towers or, if you want to maximize your space, outside of the towers. These are elliptical shaped bars to cut down on the wind noise and help with fuel efficiency. The bars work with channel mounted accessories and accessories that clamp to crossbars.
  view full answer...


• Recommended Towing Package for a 1999 Toyota Land Cruiser
• There is a difference between a tow package installed on your vehicle from the factory and buying an aftermarket trailer hitch, wiring harness and ball mount. Factory tow packages can be make up of various parts, however it sounds like your 1999 Toyota Land Cruiser does not come with a factory tow package since it did not come with a trailer hitch. To tow with your 1999 Toyota Land Cruiser you will need a Hitch # 13443, a wiring harness # C55365, ball mount, hitch ball and pin and clip...
  view full answer...


• Recommend Wiring Adapter for Installing Trailer Brake controller on a 2013 Toyota Land cruiser
• You will need to use Tekonsha Custom Wiring Adapter # 3040-P this adapter plugs into the 5-pin brake control wiring harness connector on your 2013 Toyota Land Cruiser. The connector is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal. You then need to use the adapter harness # 331-TPH-017 which will plug into the above harness, and then directly into the Redarc Tow-Pro Elite # RED44FR.
  view full answer...


• Recommended Lock N Roll Articulating Hitch For Scamp Trailer
• For your Scamp trailer, the Lock N Roll Articulating Hitch - Adjustable Channel Mount - Vehicle Side - 11,000 lbs # 336VS503 will work with the Lock N Roll Articulating Trailer Coupler for 2" Receivers - Trailer Side - 11,000 lbs # 336TS510 you mentioned but I don't believe that is the best option for your trailer as that could involve cutting and welding. Instead, I recommend the Lock N Roll Articulating Channel Tongue Trailer Coupler - 3" Channel - Trailer Side # 336TS508. This will...
  view full answer...


• What Does etrailer.com Trailer Brake Assemblies # AKEBRK-35-SA Weigh
• The 3,500 lb trailer axle brake assembly set part number # AKEBRK-35-SA weighs a total of 20 lbs. This is the weight of both assemblies together.
  view full answer...


• Recommended Tire Chains for 2014 Toyota Land Cruiser
• We have numerous tire chain options for your 2014 Toyota Land Cruiser with 175/70R14 tires. I have included a link to all of the tire chains that will fit your tire size for you to review. Thule Standard Snow Tire Chains, # TH01221060, that you have referenced are a confirmed fit for your Land Cruiser and our customers love them. The chain's D-Shape links provide excellent traction and the integrated rubber tensioners let you control the fit of your chains. These chains are sold in pairs. I...
  view full answer...


• Recommended 4-Way Trailer Connector for 1996 Toyota Land Cruiser
• The Hopkins Plug-In Simple Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # 43365 is a fit only for a 2000 Toyota Tundra. For your 1996 Toyota Land Cruiser, you will want the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 33405. This T-connector harness will plug into the factory wiring behind each of your tail lights. I has an integrated converter to give you the 4-way trailer connection you desire.
  view full answer...


• How to Select Weight Distribution/Sway Control System for 2008 Coachmen Catalina 20 RD
• The key to selecting a weight distribution/sway control (WD/SC) system is to know your trailer's fully-loaded tongue weight (TW) with water tanks filled and with all gear and supplies loaded. A trailer's dry hitch weight is not enough to choose the right system. My research shows that the dry hitch weight of the 20RD is about 448-lbs. We offer a handy scale to do this, part # e99044 from Sherline, but other methods to measure your loaded trailer TW are outlined in the linked article. You...
  view full answer...


• Bolt On Roof Rack/Basket For 2018 Polaris RZR XP4 Turbo
• Having had a Side by Side, I know some of the trails can get pretty hairy and rough. Those rough rides are what really take a toll on your equipment, so I would recommend keeping it as simple as you can. We do not carry parts for your specific situation, but I can lead you to the system that I would use to get the best result. Since you are customizing your rig, drilling will be required. If you are okay with that, then the Rhino-Rack Roof Rack Legs - Fixed Mount - Item # RFMPC you suggested...
  view full answer...


• Bike Rack Recommendation for 2013 / 2014 Land Cruiser Carrying Trek Domane Road Bike
• When it comes to a bike rack to carry your Trek Domane Road Bike, my personal pick would be the Kuat NV 2.0 4 Bike Platform Rack # NV22G-NA22G. Constructed of rustproof aluminum for a durable lightweight design, this rack is top of the line and loaded with options including the tilt feature that you are looking for. The platform design supports bikes at the wheels so there is no contact with the bike frame and the included hitch lock and integrated, retractable cable lock provide ultimate...
  view full answer...


• Availability Of Wiring Adapter To Install Redarc Tow Pro Elite V3 In 2020 Toyota Land Cruiser
• As long as your 2020 Toyota Land Cruiser VX VDJ200 has a factory 7-way connector you will be able to use the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers # 3040-P and # 331-TPH-017 which will plug into the factory trailer brake connector under your vehicles dash. This will give you the connector needed to plug directly into the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR you were looking at. If your Land Cruiser does not have the the factory 7-way connector...
  view full answer...


• Installing Trailer Wiring Harness on 2000 Toyota Land Cruiser
• I couldn't find any information regarding a factory tow package for your 2000 Toyota Land Cruiser that would have included a converter for a trailer wiring harness. I think what your Land Cruiser is equipped with is a universal harness like the Tekonsha Hardwire Kit # 119178KIT that a previous owner installed. This harness splices into the tail light wiring of the vehicle and the needed converter does get mounted behind the driver side tail light assembly. Theoretically the Tekonsha T-One...
  view full answer...


• Recommended Coupler Lock For Horse Trailer With 2-5/16 Inch Coupler
• If you are looking for a coupler lock when the trailer is parked and not hooked up to your towing vehicle I recommend the Fastway Universal Trailer Coupler Lock, part # FA86-0015-316. This lock slips inside the coupler where the hitch ball goes and has a hardened shackle that holds the lock in place. If you are looking for a pin-style coupler lock I recommend part # e98888. This lock has a 1/4-inch diameter pin with a 3-3/8 inch span and has a protective lock cover to help keep out dust...
  view full answer...


• Comparing the Different Harnesses To Install a 7-Way On a 1999 Toyota Land Cruiser
• In order to install a 7-way trailer connector and brake controller on your 1999 Toyota Land Cruiser I recommend going with option one that consists of the Curt T-Connector Vehicle Wiring Harness part # C55365 and the Universal Installation Kit for Trailer Brake Controllers part # ETBC7. This option will be easier to install and it will be more cost effective. In regard to Universal Wiring Harness w/ ModuLite and Brake Controller Harness part # 22551, the ModuLite is really no different...
  view full answer...


• Transmission and Engine Oil Coolers for a 2013 Toyota Land Cruiser 200 GXR8
• For a transmission cooler, the most popular option for the 2013 Toyota Land Cruiser is # D13503. Current pricing is available by clicking on the link provided. For an engine oil cooler, after some research I found that the Land Cruiser uses 3/4-16 threads on the filter and a 2-3/4 inch diameter o-ring. For a cooler that has these measurement you can use # D15451. Current pricing is available by clicking on the link provided. I have included some links on coolers for you to view.
  view full answer...


• Towing Mirror Recommendation for 2005 Toyota Land Cruiser
• We don't have a custom fit option for your 2005 Toyota Land Cruiser, but we do have a towing mirror option that will fit and work well. The K-Source Towing Mirrors part # KS3891 would be a great option for your vehicle. I pulled up pictures of your vehicle and the mirror style that it has would work well with these mirrors.
  view full answer...


• Tow Bar Lighting Recommendation for a 1993 Toyota Land Cruiser Towed By RV with 7-Way
• The 7-way at the rear of your RV that you would use for connecting to the tow bar lighting will have the taillight signals combined. The easiest way to wire up your 1993 Toyota Land Cruiser will be to use a diode kit like part # RM-154 to wire up the taillights as a combined system. I attached a chart that shows how this will work. To convert the RV 7-way to a 4-way you would also need part # PK12716.
  view full answer...


• Recommended Trailer Wiring For 2017 Toyota Land Cruiser
• For your 2017 Toyota Land Cruiser Diesel, none of our companies have a confirmed fit customized wiring kit for your vehicle. Because of this, I recommend you go with the Tekonsha ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT. This will allow you to install a 4 way flat connector on your vehicle using a zero-contact interface sensor system that does not require splicing or cutting wires. This will be compatible with your factory wiring getting signal without piercing the insulation...
  view full answer...


• 1967 Aljo Camper Trailer Swaying Dangerously Behind a 2000 Toyota Land Cruiser
• First of all, you did the right thing by moving more weight forward. Now, you will want to get your trailer as level as possible. You could try letting your weight distribution chains out (loosen them) by 1 chain link, and see if that helps the situation. Then, examine your suspension on the trailer. Is everything in good shape? Nothing bent? You will want to rule out anything there as being a cause of the problem. If the problem still occurs, you might want to consider upgrading your sway...
  view full answer...