Expert Answers about Jeep TJ
- Does Adapter 4 Pole to 6 Pole and 4 Pole Trailer Wiring Adapter # 37175 Use 10 Gauge Wire
- The Adapter 4 Pole to 6 Pole and 4 Pole Trailer Wiring Adapter # 37175 has 10 gauge wire for the blue wire, red wire, and black wire. The aux circuit you mentioned would be the black wire.
view full answer... - Braking system solution for 1999 Jeep Wrangler Flat Towed by 2013 Ford F150
- I would suggest using the Brake Buddy Select 3 Portable Supplemental Braking System # HM39524. It is a great option that requires minimal installation for power and emergency brake away cables. It is also portable so it can be moved to different vehicles very easily. It includes a remote that you can use in your Ford F150 or any other vehicle with a 12 power supply. The remote allows you to receive feedback from the unit as well as be able to adjust the sensitivity while you drive. This...
view full answer... - Parts Needed to Flat Tow 2003 Jeep TJ Wrangler with D-Rings Mounted on Front Bumper
- If you have D-rings on the bumper of your 2003 Jeep Wrangler front bumper we have a couple options depending on the width of them. We have the part # RM-035-1 which is for 1 inch thick D-rings or the # RM-035 for 3/4 inch thick D-rings.
The only issue is that these are not compatible with your Stowmaster tow bar since this only fits with the tow bars that store on the motorhome. So you'd need to upgrade to a new tow bar with something like our very popular Roadmaster Falcon # RM-520.
view full answer... - Does Bumper of 1997 Jeep Wrangler Have to Come Off to Install Trailer Hitch
- The trailer hitches we offer for a 1997 Jeep Wrangler like the Draw Tite # 75193 do not require you to remove the rear bumper. Basically the hitch just gets raised into position and bolted in place. I attached an install video for more info on this.
view full answer... - What Adapters can I use for Using the Blue Ox Avail with my Off Road Bumper?
- There are tow fgreat choices for adapters and it will all come down to the diameter of the hole in the D-ring. For a 1" hole use the Blue Ox Aftermarket Bumper Adapter part # BX88358 and for a 7/8" hole diameter use the Blue Ox Aftermarket Off-Road Bumper Adapter part # BX88357.
Bth of these will work with d-ring thickness anywhere from 5/8" up to 1".
view full answer... - Replacement Landing Gear for Fleetwood Trailer
- The Stromberg Carlson Electric Landing Gear Set # LG-3 referenced in your question features a standard weld stop dimension of 17-1/2 inches from outside to outside on the weld stops.
You mentioned that you took your 17-1/2 inch measurement from the bottom of the top weld stop to the bottom of the bottom weld stop. If you actually took this measurement from the top of the top weld stop to the bottom of the bottom weld stop, then this system will bolt up perfectly to your existing brackets....
view full answer... - 7-Way Replacement Recommendation for Ford F-350 that Uses Square Connector
- Although I don't know the year of your Ford F-350 it does sound like you have an older Super Duty that uses the square connector for the trailer wiring which means that for a 7-way replacement you'd need the # 118243 for something that would plug right in. If you needed the 7 and 4-way connectors you'd need to swap out the included 7-way for the # HM40950 and you'd be set.
The Bestop Underseat Locking Storage Box # B4264101 that you referenced does not fit flip or fold up seats but will...
view full answer... - Can Demco SBS Stay N Play DUO Work on 2000 Jeep Wrangler TJ
- Yes, the Demco SBS Stay-IN-Play DUO Supplemental Braking System part # DM86VR will work on a 2000 Jeep Wrangler with hydro-boost brakes. The vacuum connections however will be different than those in the instructions, instead you'll need to simply leave the factory installed check valve open and not connect it to anything. This will just send more air pressure to the air cylinder.
view full answer... - 7-Way Trailer Wiring Recommendation for 2002 Jeep Wrangler
- You will need to start with a 4-way (if you do not have one). For that you would want the # 118409.
Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way.
If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way and install a brake controller.
For a brake controller I would recommend the Prodigy P2 Brake Controller...
view full answer... - Recommended Parts To Flat-Tow a 2005 Jeep TJ
- In order to flat-tow a 2005 Jeep TJ you'll need a tow bar, base plate kit, safety cables, wiring harness, and braking system. The base plate kit I recommend is the Blue Ox Base Plate Kit part # BX1120 which will then work with the Blue Ox Avail Non-Binding Tow Bar part # BX7420. The Blue Ox Avail has extra long arms and a high capacity.
For a braking system I recommend the Blue Ox Patriot Braking System part # BLU37TR. You'll also need the Roadmaster Brake-Lite Relay Kit for Towed Vehicles...
view full answer... - Rampage Soft Top Recommendation for a 1997 Jeep Wrangler with Hard Top
- For your 1997 Jeep Wrangler the part # RA68736 only requires that your Jeep has factory full steel doors and a hardtop.
All of the needed hardware would be included with the kit.
view full answer... - Are Windows of Bestop Sailcloth Replace-A-Top Removable
- Yes, the rear and side windows of the Bestop Sailcloth part # B7913901 that you referenced are removable.
view full answer... - Replacement Hardware Recommendation for Curt part # 13430
- We do, indeed. To order replacement hardware for the Curt hitch part # 13430, all you need to do is enter the part number for the hitch on the product page for part # RHK and then add to cart and we will send you out new install hardware for the hitch you have.
view full answer... - Parts Needed to Flat Tow Jeep Wrangler with D-Ring Front Bumper
- If the D-ring bumper mounts are 3/4 inch you'd want the part # RM-035 for base plate kit adapters or if they are instead # RM-035-1 for if they are 1 inch.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All Terrain, # RM-522. This has non-binding arms which makes the setup very easy to connect/disconnect.
For lighting/safety cables, locks,...
view full answer... - What Flat-Tow Setup do You Recommend for My 2006 Jeep Wrangler with 1-Inch D-Rings?
- Thanks so much for the photos and specs! For flat-tow parts on your 2006 Jeep Wrangler, you need a D-ring adapter, a tow bar, a tow braking system, safety cables, and vehicle tow wiring
You can definitely use your aftermarket off-road bumper with the 1-inch D-rings attached as long as the bumper is approved to flat-tow. Since this is the case, I recommend the following setup:
- Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick # RM-035-1
- Roadmaster...
view full answer... - Parts Needed To Flat-Tow 2004 Jeep TJ with Aftermarket Bumper
- If your aftermarket front bumper has d-rings and they can be used for flat-towing then you might be able to attach a tow bar such as the Roadmaster Falcon All Terrain, Non-Binding Tow Bar part # RM-522 using an adapter like the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars part # RM-035 for 3/4" thick d-rings or part # RM-035-1 for 1" thick d-rings. If it doesn't have d-rings, they can't be used for flat-towing, or they aren't the correct size you'll have...
view full answer... - Does Draw Tite Hitch 75193 Fit 2006 Jeep Wrangler TJ Unlimited
- Yes the Draw Tite Hitch part # 75193 does fit your 2006 Jeep Wrangler TJ Unlimited 4-door and would work great with a Kuat or Curt bike rack.
view full answer... - Charging Battery on 2005 Jeep While Being Towed Behind Motorhome
- In order to get power from your motorhome to your 2005 Jeep while you're flat towing you'll need a working 7 way with 12 volts. Since the front of your Jeep has a 4 way flat on it you will need to change out the plug because all 4 wires are being used. The tail light circuit won't have enough power to charge the battery and run the lights on your Jeep, however you won't be forced to rewire everything, just the plug on the front of the Jeep.
If you don't have 12V at the back of the 7 way...
view full answer... - Front Axle Suspension Kit for 1998 Jeep TJ to Support Use of Snowplow
- A front-axle suspension enhancement kit for your 1998 Jeep TJ is an excellent idea if you will be using a snowplow/winch set-up. We offer a range of suitable products whose fits will depend on whether your TJ is 4WD or 2WD. We offer several options if 4WD and one if 2WD.
If you have a 4-wheel-drive TJ a great option that is cost-effective and simple to install is the Super Springs # CSS-1168F. This kit consists of two microcellular polyurethane foam springs that insert between the turns...
view full answer... - Coupler Style Tow Bar for Jeep
- The Roadmaster Falcon 2 Tow Bar - Motorhome Mount - 2" Hitch - 6,000 lb., # RM-520 is a hitch mount style tow-bar, that piece is needed for tow-bar to function.
If your objective is that you are wanting a coupler style tow-bar and to tow your Jeep by connection to its bumper, then I suggest, providing the bumper on your Jeep is rated for it, the Curt Tow Bar with Adjustable-Width Arms, # C19745. This has mounting brackets that attach to your vehicle's bumper, no base plates required....
view full answer...
Go To Results