Yes, from what I see your 1996 Geo Tracker does indeed have a separate wiring system. But wiring harness # HM41245 is designed only for the Tracker to tow a trailer and not for the Tracker to be towed behind an RV. You will need a different wiring harness.
There aren't any vehicle specific tow bar harnesses that will plug into your Tracker so I recommend using a diode kit # RM-154. This will make it so that the lighting will be done by the Tracker's tail lights (powered from the RV via... view full answer...
We have just what you would need to adapt the Roadmaster base plates on your 1997 Geo Tracker to your Blue Ox tow bar. If the arms of the base plate are removable you would need the part # RM-032 or if the arms of the base plate are not removable you would need the part # RM-033.
The removable arm kit for your vehicle is the part # 1007-2 and the permanently mounted arm kit is the part # 118-15 in case you are unsure what you have. view full answer...
Yes, Roadmaster base plates # 118-3 will fit your 1992 Geo Tracker 2-door 4x4. For a compatible tow bar I recommend the Falcon 2 # RM-520. I have linked a video review of this tow bar for you. For safety cables I recommend # RM-643. The coiled design helps keep the cables off of the ground.
For lighting you can use a simple kit such as # RM-2120. this kit bypasses the Tracker wiring so you won't have to splice into the tail light wiring.
You may also need a high/low adapter to keep the... view full answer...
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
I also attached a link to all of our help articles on flat towing lighting as well. view full answer...
For your 1993 Geo Tracker the only trailer wiring harness I can recommend for you is a universal install harness like the part # 119178KIT that has been confirmed as a fit.
The # C55372 that you referenced would not work for your vehicle. view full answer...
Does you 1997 Geo Tracker have a Blue Ox Base Plate kit # BX3508 for a 2-door or part # BX3505 for a 4-door installed on it?
If so, then to use a Roadmaster Sterling Tow Bar # RM-576 you will need to also use the # RM-031-5 that you referenced. Since the serial number of your tow bar is above 14,501 this adapter will fit. view full answer...
The correct mount kit for your 1992 Geo Tracker to use your Snowbear Plow part # SB324-167 is the part # SB397-050 that you referenced. This kit is custom fit for your vehicle and is designed to work with the Winter Wolf as well. view full answer...
In order to flat-tow a vehicle you'll need to use a tow bar which attaches the towed vehicle to the motorhome. If you are using a vehicle mounted tow bar like the Roadmaster StowMaster Tow Bar part # RM-501. The length of ball mount required will vary by application but you should not need any sort of extended version. That said, I don't have an exact length for you as it will again vary by application.
I have attached a list of ball mounts below. view full answer...
With the Roadmaster Classic Base Plate Kit part # 118-8 that you referenced you will need to use a tow bar that has a quick disconnect crossbar like the Stowmaster part # RM-501. No other hardware or brackets would be needed to make the connection. view full answer...
For your Duncan Towmatic II Stowbar, The RoadMaster Base Plates to Duncan Towmatic II, Karbar and EazAligner Tow Bars Adapter # RM-038 will allow you to connect to the Roadmaster XL Base Plate Kit - Removable Arms # 1012-1 that are a fit for your 1999 Tracker. I recommend using Loctite Threadlocker # LT37420 for this install.
I also recommend you use the RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs # RM-643 for this application.
For your tow bar wiring, I recommend the... view full answer...
I wish we had the exact part you need but we don't offer replacements parts for the soft top on your 1996 Geo Tracker. The only option I can offer you is a full replacement with the Rampage Replacement Soft Top Fabric for Suzuki part # RA98815. This option comes with the top and three individual windows which attach via zippers. The fabric is constructed of a durable black denim and it has marine-grade stitching to keep out water. The kit also comes with a one year warranty.
Again, I... view full answer...
If your tow vehicle, the motorhome, has trailer wiring on it already it has the circuits combined as that is the standard way trailer wiring is ran.
That means that for a diode wiring kit for your 1995 Geo Tracker the part # RM-15247 would fit and be exactly what you want without needing any further wiring or adapters. view full answer...
For lighting to flat tow your 1990 Geo Tracker, the easiest solution is to use a magnetic kit such as # RM-2120. There are no custom fit tow bar wiring harnesses for your 1990 Geo Tracker.
I have included some links to help articles on tow bar wiring for you. view full answer...
You would need to have an all flat metal bumper on your 1996 Geo Tracker for the Curt tow bar part # C19745 to be able to connect. Since your vehicle does not have that you would need to go a different route.
You would need to install a base plate kit. For that you would need the part # 118-15. For a lower priced tow bar we have the Roadmaster part # RM-020 which would be an excellent option.
For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.
For... view full answer...
You are correct that the SportRack # SR1002 does require a hard top roof. Your best bet is to go with a trailer hitch like the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 11128. Then you can use a lightweight trailer like the Yakima Rack and Roll Trailer # Y08106. I have included a video review of this roof rack on wheels for you to check out.
To complete your towing package, you will want the following:
Drawbar # 3593
Wiring kit # 119178KIT
1-7/8" hitch ball # 19256
2"... view full answer...
Bascially, the Roadmaster Base Plates, # 118-1, will attach flat to the frame on the front of your 1993 Geo Tracker. We have not yet had the opportunity to install the base plates on a vehicle so we do not have pictures at this time. These base plates are what are called fixed brackets so they will always be visible on the vehicle. I recommend going with the XL style, # 118-3, which has removable arms, but otherwise install the same way.
There are several other parts you will need to safely... view full answer...
For Roadmaster base plates # 118-8 for your 2-door 1997 Geo Tracker you can use any Roadmaster tow bar.
The most popular tow bar is the Falcon 2, # RM-520. But if you were looking for something a little more cost effective you could use the Tracker tow bar to tow your Tracker, # RM-020. You will also need safety cables, # RM-643.
Next you will need lighting. I recommend going with a magnetic kit like # RM-2120 This kit will bypass the vehicle wiring.
And finally, most states now require... view full answer...
For trailer wiring for your 1989 Geo Tracker we have universal kits like the part # 119178KIT which are a confirmed fit. This brand is the most reliable of the options available for your vehicle though. view full answer...
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
This kit can be installed on vehicles like yours that have the stoplights and turn signals on the... view full answer...
Go To Results