Expert Answers about Chevrolet HHR

• Hitch Size that Fits 2011 Chevy HHR
• For your 2011 Chevy HHR there are only 1-1/4 inch hitches available like the Curt # C11447. The 2 inch hitch size is only available on higher capacity vehicles like trucks and SUVs. I attached an install video for this hitch for you to check out as well.
  view full answer...


• Complete Flat Tow Setup of 2006 Chevy HHR
• For a complete flat towing setup of your 2006 Chevrolet HHR you will need the following equipment. For the base plate kit, the Roadmaster # 3141-1 kit would be a perfect fit. Next you will need a tow bar. I recommend the Roadmaster # RM-522 “Falcon” All Terrain and Non-Binding tow bar rated for 6000 pounds. A non-binding tow bar will let you easily disconnect your tow bar even if your coach and towed vehicle is not on level ground or at a difficult angle. When your coach and towed vehicle...
  view full answer...


• Most Economical Flat Tow Package For a 2010 Chevrolet HHR
• I recommend the Roadmaster Crossbar-Style Base Plate Kit # 3141-1 as being the most economical for your 2010 Chevrolet HHR(Non-SS Trim). The baseplate height of this kit is 15-1/2" with 215/70R17 tire size. This is important to compare with the receiver height on your tow vehicle. You want it to be within 3" or you will need to use a High-Low Adapter like # RM-048-4 that will raise or lower the tow bars by 4". If you need help finding the correct adapter, let me know your tire size on the...
  view full answer...


• Base Plate Kit Recommendation for 2008 Chevy HHR To Flat Tow It
• I have probably a better solution, but to make what you have now work you'd need the replacement arms # RM-ARMS and the base plate kit adapter part # RM-032. The reason this isn't ideal is the process for getting the arms take a while since they have to be custom made and by the time you pay for the two parts mentioned you are close enough in price to a base plate kit that fits the vehicle without an adapter. For that you'd want the Blue Ox part # BX1692 and you'd be set. I attached an...
  view full answer...


• Recommended Trailer Hitch for 2011 Chevrolet HHR
• We carry all the major trailer hitch brands and according to our manufactures there is only a Class I trailer hitch available for your 2011 Chevrolet HHR LT Flex Fuel. I recommend the Draw-Tite # 24756 over the Curt # C11447 because Curt requires the use of a stabilization support strap # 18050 with any non-trailer load per their warranty. For a light weight bike rack that is compatible with the Class I hitch, I recommend the Thule Helium Pro # TH9042PRO. The Thule Helium # TH9042PRO...
  view full answer...


• Hitch Mounted Winch Plate Recommendation
• Yes, what you need is a winch plate like the Bulldog Trailer Hitch Receiver Winch Mounting Plate # BDW20011. This would work great with the Superwinch S9000 Heavy Duty Recovery Winch that would also provide you with plenty of capacity for your application. I attached an FAQ on electric winches for you to check out.
  view full answer...


• Parts Needed to Flat Tow 2019 Jeep Cherokee Limited, Latitude or Latitude Plus
• For your 2019 Jeep Cherokee you'll need to first start with a base plate kit. For that you'd want the part # RM-521452-4. This fits the Latitude, Latitude Plus and Limited models. If you have an Overland, Trailhawk, or Trailhawk Elite you'd want the # RM-521451-5. Next you'll need a tow bar which for that the Roadmaster Sterling part # RM-576 is your best option for if you have the Latitude or Limited models since you'll need the included crossbar. If you have an Overland or Trailhawk...
  view full answer...


• Easier Option for Pulling Fuse to Dinghy Tow a 2011 Chevrolet HHR
• You can use a fuse bypass like the Roadmaster FuseMaster # RM76511. Once installed, you will be able to turn off the fuse with the flip of a switch. I am including a link to the installation instructions for you to review.
  view full answer...


• Flat Towing Setup Recommendation for a 2008 Chevy HHR
• For your 2008 Chevy HHR you would want a Roadmaster XL Base Plate Kit # 3141-1 like you referenced. This base plate kit is confirmed to work with your Falcon 2 tow bar. This base plate kit will bolt onto your vehicle and would not require any welding to install. You will also need safety cables. I recommend Roadmaster safety cables, part # RM-643. These are coiled so they will not drag on the ground. The next component you will need to flat tow the Malibu is lighting. There are actually...
  view full answer...


• Hitch and Trailer Recommendation for a 2011 Chevy HHR
• The only way you could transport a 500 handicap scooter with your 2011 Chevy HHR would be for you to install a hitch like part # 24756 and then use a small trailer. A cargo carrier setup wouldn't work because your vehicle wouldn't have the tongue weight rating to suspend the weight of your 500 lb wheel chair off the ground unsupported. To complete your towing setup you would also want a ball mount, the # 118407 for trailer wiring, # 19256 for a 1-7/8 inch hitch ball, and # 19258 for a...
  view full answer...


• Trailer Hitch Recommendation for a 2011 Chevy HHR
• Curt and Draw Tite are not the same companies. Draw Tite and Hidden Hitch are made by the same company so they are basically the same. But Curt is it's own company by itself. For most vehicles all of the hitch manufacturers will go with a very similar design that uses the same installation points on the vehicle. In the case of your 2011 Chevy HHR all of the hitches do look very similar with a few minor differences. The hitch I would recommend is the Draw-Tite part # 24756 because it doesn't...
  view full answer...


• What Will I Need to Economically Flat Tow My 2006 Chevy HHR
• A tow bar you could use to pull your 2006 Chevy HHR is the RoadMaster Tracker Tow Bar, part # RM-020. You may also be interested in purchasing a Roadmaster Tow Bar Quick Disconnect Kit, part # RM-201, if you would like to be able to easily remove the tow bars from your HHR. You will also need a set of Roadmaster Tow Bars for the 2006 Chevrolet HHR, part # 3141-1, in order to connect your HHR to your tow bars. The most economical system to use for turn signals and brake lights for your...
  view full answer...


• How To Carry Bikes On a 2020 Hyundai Kona
• I have a few different ways to carry bikes on a 2020 Hyundai Kona. The easiest option is with a trunk mount bike rack and for this I recommend the Yakima FullBack 2 Bike Rack part # Y02634. This is a great option for occasional use. The other option which is more geared towards frequent use is a trailer hitch and hitch mounted bike rack, the Curt Trailer Hitch Receiver part # C11529 (Excluding Electric) with the Thule Camber 2 Bike Rack part # TH9058 is what I recommend.
  view full answer...


• How to Carry a Trike on a 2007 Chevy HHR
• We do have some trike carriers that would likely work with your trike but the issue is the hitch. The trailer hitches for the 2007 Chevy HHR are all Class I hitches and the 2 carriers are designed for Class II or Class III hitches. The only way to carry the trike would be on the roof and it requires a little creativity. You would start with a roof rack such as the Thule rack using parts # TH712100 and # TH710401. Then you would need the Yakima Boa, # Y02065. that takes care of 2 wheels...
  view full answer...


• High Capacity Roof Rack Recommendation for 2009 Chevy HHR
• The roof rack that fits your 2009 Chevy HHR that has the highest weight capacity is the Rhino Rack part # RRVA106S-2 and # RRSX100 which has a weight capacity of 165 lbs.
  view full answer...


• Does Roadmaster Stop Light Switch Kit # RM-751428 Fit 2010 Chevy HHR
• I apologize for any confusion but the Roadmaster Stop Light Switch Kit # RM-751428 that you referenced is a fit for your 2011 Chevy HHR as it fits HHRs from the years of 2006 - 2011.
  view full answer...


• Parts Needed to Flat Tow a 2009 Chevy HHR
• We do offer an adapter to allow Roadmaster base plate brackets to fit other brands of tow bars, including Draw-Tite, Reese, Valley, Tow Ready and EAZ-Lift. Roadmaster Adapter part # RM-025 will work with Roadmaster base plates and the above brands of tow bar. For a base plate you would then want the part # 3141-1 which is a confirmed fit for your 2009 Chevy HHR. I attached an install video for you to check out as well. For lighting you can use the diode kit, # RM-15267, and not have...
  view full answer...


• Parts Needed to Flat Tow 2009 Chevy HHR
• We have everything you would need to flat tow your 2009 Chevy HHR. First thing you'd want is a Blue Ox base plate kit to use with a Blue Ox tow bar. For that you'd want the # BX1692. The Aventa you mentioned is not made anymore but the Alpha part # BX7380 is and would be a great option. For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the...
  view full answer...


• Can 2008 Chevy HHR with Automatic Transmission be Flat Towed Behind RV
• I looked up your 2008 Chevy HHR with an automatic transmission and it can be flat towed as-is as long as you follow all of the guidelines in the owners manual and stay under 65 MPH. To flat tow your vehicle you will need to start with a base plate designed to fit your vehicle which for that you'd want the Roadmaster part # 3141-1 which is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat...
  view full answer...


• Does Curt Fifth Wheel Rail Kit C16428-204 Fit 2018 Ford F-350 Dually
• Yes, the Curt Fifth Wheel Rail kit part # C16428-204 fits the dually and non-dually versions of the 2018 Ford F-350 like what you have. I attached an install video for this for you to check out as well.
  view full answer...