Personally, I like the SlientACT # SHP2082 because it does thread in but then you use the cam lever to quickly tighten or loosen it. I have linked a video review of it for you.
Or another option I think you will like is the Pro Series lock and anti-rattle device # PS63100. This one uses a longer block so that it cannot turn when inside of the shank rather than relying on a spring for retention. I have linked a video of this one as well.
For either of these options I recommend used Loctite... view full answer...
I'd be happy to help, but I do need to know the year of your Acura MDX and whether or not you already have a roof rack, trailer hitch or any other accessories. If you can get back to me with this information I'd be happy to give you the best options. view full answer...
The etrailer hitch part # e98840 that you referenced is a confirmed fit for your 2015 Acura MDX and will allow to keep your full size spare tire as long as it's an 18 inch wheel and not 19-20 inch. It will need to be temporarily lowered though to install the hitch. view full answer...
The Draw-Tite trailer hitch # 75614 for your 2013 Acura MDX is now the only option that comes with the mounting location for a 4-Way mounting bracket. Hidden Hitch has been discontinued. In addition to the hitch and the wiring you will also need bracket # 18144.
For wiring harness # 118424 or any of the wiring harnesses for the vehicle you can route the 4-Way through the vehicle and outside to attach it to the bracket rather than storing the harness in the vehicle when not in use. To do... view full answer...
That is entirely possible and your vehicle owners manual may have that information. Or the best option would be to have an Acura dealer run the VIN on your 2005 MDX and they should be able to tell you how it is equipped.
The most popular power steering cooler we have is # D13212. It is 8-1/8 inches wide, 5 inches tall, and 3/4 inches deep.
If space is limited then # D13200 would be a better option. It is 12-5/8 inches wide, 2-1/2 inches tall, and 3/4 inches deep. I have linked the installation... view full answer...
The roof rack system I recommend for your 2012 Acura MDX is the Rhino Rack Vortex System.
This system includes the 54 inch Aero crossbars, the leg kit, and custom clamps and pads that will ensure a secure fit for your MDX. When ordering this roof rack system you will need part # RRVA137B-2, part # RRRLKVA, and part # DK176.
The carrier I recommend for the skis and snowboard is the Rhino-Rack Carrier, part # RR576. This would fit well on the roof rack I recommended. To be certain it will... view full answer...
Trailer hitches like the Curt hitch part # C13146 that you referenced are pretty easy to install for mechanics relative to the types of projects they have to deal with on a routing basis. Your best option would be then find a local mechanic to you with a good repuation and have them install it.
I attached an install video for this hitch for you to check out as well.
For trailer wiring you'd then want the Curt kit part # C56192 which is a custom fit too.
If you wanted to do some towing... view full answer...
The Yakima HangOut 3 Bike Rack, # Y02638, would be an excellent choice for your 2009 Acura MDX. Of the trunk mounted options that are available for your vehicle this one is among the easiest to install and remove and will allow you to attach the bikes easily.
Using a trunk mount bike rack on your 2009 Acura MDX would require you to remove the rack each time you needed to access the back of the vehicle. For this reason I recommend using a trailer hitch and hitch mounted bike rack.
My recommendation... view full answer...
The best hitch solution we offer for your 2019 Acura MDX is the etrailer hitch part # E98840 as it has plenty of capacity for your bike rack, is the least visible option, and has a very easy install. I attached a picture of it installed as well as an install video for more info for you to check out as well.
For a bike rack I really like the Saris Superclamp EX part # SA4025F.
This is a platform bike rack that only touches the bike at the tires and only weighs 35 lbs. The biggest drawback... view full answer...
To start off you need a 4-Way connector on your 2018 Acura MDX. I recommend the Tekonsha T-One # 118628 because we have found the Tekonsha wiring to be the most reliable and it has the highest amp ratings so it can deliver more power to the trailer lights.
Then to add a 7-Way connector you need to install the Universal Wiring Kit # ETBC7. This includes the adapter as well as all of the wiring and connectors needed to add a brake controller to your Acura MDX.
If you don't already have... view full answer...
So the easiest to install brake controller that also works really well is the Curt Echo Mobile part # C51180. Basically this just plugs into an active 7-way and once you sync it to your phone it's ready to go. This brake controller is proportional which means it senses the amount of deceleration your tow vehicle is applying and applies the trailer brakes in a relative way.
To convert the 4-way to a 7-way so that you can install the brake controller only requires the 7-way adapter kit part... view full answer...
The Firestone # F4138 and # W237604138 are the same part. 4138 is the part number, and W237604138 is the SKU number that Firestone uses internally.
Both the # F4138 and the Timbren # THROD2 are compatible with MDX models that have the coil spring rear suspensions only. It will not work on models equipped with the Coil-Over-Strut suspension.
The Timbren springs will suspend up to 2000 lbs loaded in your MDX, while the Firestone Air Suspension is good for up to 1000 lbs. Neither system... view full answer...
The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98840 is confirmed to fit your 2020 Acura MDX Sport Hybrid and is a great choice due to its durable matte black powder coat finish that protects from chips and scratches, and due to the hidden crossbar that leaves only the receiver itself visible once installed as you can see in the included picture.
At this time none of the trailer hitch receivers confirmed to fit your MDX will allow you to fit a... view full answer...
The stabilizer strap part # 18050 is recommended by Curt on hitches that aren't rated for weight distribution systems to help take some of the vertical shock that a non-supported hitch accessory can exert on a hitch over bumps. This is a precaution that Curt recommends for their hitches. To see how this product works and installs check out the video I attached to the right.
The other option you have would be to get a hitch like the # e98840 that has also been confirmed to fit your 2015... view full answer...
If you are opposed to a trailer hitch on your MDX the trunk mount bike carrier I recommend is the Hollywood Racks Over-the-Top 3 Bike Rack, part # HRF2-3.
This bike carrier is designed for vehicles with spoilers as you said you have on your MDX. This bike rack is designed to carry 3 bikes that weigh up to 35-lbs each. The upper frame of the bike rack extends over the spoiler, and folds down for easy storage when not in use.
If you are planning on carrying bikes with alternative frames... view full answer...
You can use a weight distribution hitch with anti-sway with your 2012 Acura MDX without issue. I took a look at the owner's manual and it stated it did not recommend one because the wrong one could reduce performance. However, that won't be an issue because we will get you the right system for your 2,500 lb camper so you can enjoy your drive to your destination.
In order to choose the properly rated weight distribution system you will first need to know your total tongue weight (TTW),... view full answer...
For your 2014 Acura MDX I recommend the Curt Trailer Hitch Receiver # C13146 as we have found that the powder coat finish Curt uses holds up the best over time, and it has the same 900lb tongue weight rating and 6000lb trailer weight rating as the other hitches available so it is plenty strong.
When we installed the # C13146 we found that from the ground to the top inside edge of the receiver was 14". You mentioned that from the ground to the trailer was 12". If that measurement was to... view full answer...
From the sound of your question, you are looking to mount the Curt Roof Mounted Cargo Basket # C18115-117 directly to your roof with the Custom DK Fit Kit # DK400.
However, the # DK400 fit kit only fits Rhino-Rack 2500 Series Legs # RRRLKVA along with the Vortex Aero Crossbars # RRVA137B-2. This setup is designed to fit your 2014 Acura MDX if you have a bare roof. The Curt Basket is not compatible with this rack because the clamps do not fit around the 3-1/8 inch wide bars. If you are... view full answer...
The owner's manual of your 2011 Acura MDX states that 'A weight distributing hitch is not recommended for use with your vehicle, as an improperly adjusted weight distributing hitch may reduce handling, stability, and braking performance.'
Given that, I'd use a different method of reducing the rear end sag. Air helper springs such as # AL60815 can be pressurized up to 35 psi when towing to add additional support to the rear suspension, and aired down to a minimum of 5 psi when not towing.... view full answer...
Thank you for reaching out!
The roof rack I recommend using for the raised rails on your 2004 Acura MDX is the Rhino-Rack Vortex system because the crossbars have the aerodynamic style and it's a simple, yet effective solution. Here are the parts you'll need:
49" Vortex Aero Crossbars - # RRVA126B-2
SX Series Legs - # RRSX100
Metal Crossbar Lock Cores - # RRVA-LEC4 (optional) view full answer...
Go To Results