Expert Answers about Toyota Sienna

• Parts Needed to Get a 7-way Connector and Brake Controller on a 2022 Toyota Sienna
• The first thing you will need to do to get a 7-way and brake controller on your 2022 Toyota Sienna is to install a 4-way connector like the T-One Vehicle Wiring Harness # TK69FR. Because you mentioned that you don't often tow I recommend the Curt Echo Wireless Trailer Brake Controller # C51180, this brake controller is a bluetooth-enabled brake controller that wirelessly connects to your smartphone, turning your phone into a brake control interface. So there is no need for a bulky brake...
  view full answer...


• Parts Needed to Install a 7-way Adapter on a 2022 Toyota Sienna
• The first thing you will need to get a 7-way on your 2022 Toyota Sienna is to wire a 4-way adapter like the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # TK69FR. There is no plug in play 7-way for your vehicle, you have to first install the 4-way and adapt it in order to make it a 7-way. The T-One connector plugs into your vehicle's wiring harness, which is located in the rear cargo area. You will have to remove the plastic threshold cover, side panels, cargo trays,...
  view full answer...


• What Parts Are Needed To Tow a Travel Trailer Behind a 2024 Toyota Sienna?
• First you will need our etrailer Trailer Hitch Receiver # e56RR if your 2024 Toyota Sienna did not come with a factory tow package and 2" receiver. This will allow you to connect to the trailer using a Equal-i-zer Weight Distribution System # EQ37060ET. The hitch is rated for trailers up to 6,000lbs with a tongue weight of 200-600lbs and it helps to reduce the rear end sag while driving making it much safer. For the electrical you will first need the 4-Way # C59236 to tie into your tail...
  view full answer...


• Parts Needed for Trailer Brake Controller Installation in 2004 Toyota Sienna
• Installation of a trailer brake controller like the excellent Prodigy P2 # 90885 in your 2004 Toyota Sienna will require that the car have a 4-pole harness like # 118304. You will also need our brake controller installation kit # ETBC7 which is illustrated in the linked article and video. These three items have all the components you need to install the controller and to have a fully-functioning 7-way on the vehicle.
  view full answer...


• Adding a 7-Way Connector and Brake Controller on a 2015 Toyota Sienna with 4-Way Connector
• There isn't a 7-Way harness that will plug into your 2015 Toyota Sienna but you can install one and a brake controller by hardwiring them in. You will just need 2 items since your van already has a 4-Way trailer connector. You will need installation kit # ETBC7 and a brake controller. For a brake controller I recommend the P2 # 90885 because it is easy to set up and use and it is reliable. Since the ETBC7 installation is a hardwire no matter what vehicle it is on you can use the video...
  view full answer...


• Parts needed to Install the Thule Sidekick Roof Rack Cargo Box on a 2010 Toyota 4Runner
• You will only need the Thule Sidekick Roof Mounted Cargo Carrier Box, item # TH78GC, if your 2010 Toyota 4Runner has the factory roof rack with cross bars that go side to side installed on the vehicle. If you do not have the cross bars from the drivers side to the passengers side you will need the Evo Raised Rail Feet # TH710401, 53" WingBar Evo Crossbars # TH711420, as well as locks # TH450400. This is the complete roof rack to install the Thule Sidekick.
  view full answer...


• Replacement Hardware Kit for a etrailer Hitch on a 2013 Toyota Sienna
• Yes, we do offer replacement hardware for the etrailer Trailer Hitch Receiver item # e98853 you referenced. It is the Replacement Hardware Kit for Trailer Hitches item # RHK. You will just need to go to the product page and insert the hitch item number and manufacturer. This will get you the required hardware to install that etrailer hitch on a 2013 Toyota Sienna.
  view full answer...


• Trailer Wiring Harness Adapter to Convert 4-Pole to 7-Way to Allow Charging Trailer Battery
• To convert your Sienna's flat 4-pole trailer connector to a round 7-way RV-style that includes a circuit for charging a trailer battery you will use Hopkins part # 37185. This simply plugs in to your existing 4-pole and will then carry the same lighting signals. In order to have a 12V charging circuit active on the 7-way you will need to add a connection for that new circuit. You will also need 10-gauge wire, part # 10-1-1; a 40-amp circuit breaker, part # 9510; as well as ring terminals...
  view full answer...


• Recommended Solution for Hitch Dragging Over Speed Bumps on 2016 Toyota Sienna
• I have a solution for you, but the Timbren # TTORSEN04 are not going to significantly lift the rear end of your vehicle and really aren't intended for this purpose. These are designed for when you're towing a camper that has a heavier tongue weight causing sag on the rear end when it's being towed and none of the available suspension enhancements for your 2016 Toyota Sienna will provide a real significant lift you're seeking. With that said, you can use the Ultra Fab # UF48-979020 skid...
  view full answer...


• Parts Needed to Add 7-Way to 2014 Toyota Sienna for Towing
• We do have a 7-Way wiring connector that you can add to your 2014 Toyota Sienna so you can tow your pop up camper! You do need to already have a 4-Way though. If you don't have a 4-Way connector then I recommend going with the Tekonsha T-One # 118498 because of how reliable it is. This tees in behind your tail lights and draws power directly from your battery via the black power wire. Attached is an installation video. Then if you only need the lighting functions I recommend installing...
  view full answer...


• Parts to Install Brake Controller and 7-Way Trailer Wiring in 2014 Toyota Sienna
• In order for your Sienna to activate the electric drum brakes on your trailer it will need to have a 7-way trailer socket. This connector carries lighting signals, 12V maintenance power for the trailer's battery (or power for it's lights) as well as the signal to activate the trailer brakes when you slow the Sienna. You'll also need a trailer brake controller. If the Sienna does not have a 4-pole flat trailer connector then you'll also need one of those. You can use the Curt part you referenced,...
  view full answer...


• Suspension Solution for Low Ground Clearance from Hitch on 2018 Toyota Sienna
• The popular Toyota Sienna and Honda Odyssey passenger vans share the trait of having a pretty low stance with not much ground clearance - even before you bolt on a hitch like the Draw-Tite # 76112. By the time you add the weight of passengers and a hitch-mounted cargo load you can end up with several inches less clearance. The solution to stiffen the van's rear suspension to reduce this sagging is an air bag kit # AL60732 from AirLift. This fits both 2WD and 4WD versions and installation...
  view full answer...


• Class II Hitch for a 2017 Toyota Sienna Premium Limited
• I have a great hitch for your 2017 Toyota Sienna Premium Limited. It is the Draw-Tite Trailer Hitch Receiver item # 36513. This is a custom fit hitch receiver that bolts directly to your Sienna with included hardware. It is a class II hitch with a 1-1/4" receiver. I have linked an installation video so you can follow along with the process while you install your hitch. There are no concealed hitches available for your van. I have attached a picture of what this hitch will look like when...
  view full answer...


• Recommended Trunk Mount Bike Rack for 2013 Toyota Sienna
• Have a look at the Hollywood Racks Over-the-Top 3 Bike Rack # HRF2-3, which is a trunk mounted 3 bike rack that will fit on the back of your 2013 Toyota Sienna. This rack has adjustable arms to make getting the bikes level a bit easier and this rack comes with 4 adjustable cam buckle straps with rubber-coated hooks that anchor the base of the rack to your trunk or hatch door. In order to carry any bikes with aggressive step through frames (women's or kids bikes) you'll need to use a bike...
  view full answer...


• Recommended Weight Distribution System for a 2008 Toyota Sienna Towing a 3,500 lb Trailer
• To ensure that you are towing safely you will first of all want to make sure that you are towing within the limits of your trailer hitch as well as your 2008 Toyota Sienna. On page 361 of your owner's manual it states that your max trailer weight rating is 3,500 lbs. Even though your trailer hitch can handle more than that, your Sienna is the limiting factor so you will need to stay within that weight range. If your trailer weighs under 3,500 lbs then a Weight Distribution (WD) system...
  view full answer...


• Parts Needed to Add a Trailer Hitch and 7-way Trailer Wiring Harness on a 2022 Toyota Sienna
• I can definitely get you set up with what you need for a trailer hitch and 7-way wiring harness on your 2022 Toyota Sienna. The first thing you will need is a trailer hitch, for that I recommend the Curt Trailer Hitch Receiver # C22UR. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" receiver opening which is the most common size used for hitch mounted accessories such as ball mounts, bike racks and cargo carriers. Next, you will need a...
  view full answer...


• Parts Needed to Install Electric Brake Controller in 2022 Sienna Hybrid AWD
• In order to use the brakes on your trailer you will need to add a 7-way and a brake controller. You will need to start by adding a 4-way with the # TK69FR. This is a plug and play installation and does not require running anything to the battery. Once you have installed the 4-way, you can add a 7-way using the # ETBC7. This comes with the adapter, wiring, circuit breakers, and everything else you need to upgrade to a 7-way. As you said, the 2022 Toyota Sienna Hybrid has a 12V battery...
  view full answer...


• How to Install a Brake Controller on a 2014 Toyota Sienna
• We have not yet had the chance to install a brake controller on a 2014 Toyota Sienna. However, the process is pretty much standard in regards to wiring so I have attached an install video of a brake controller on a similar model year which you should be able to use on your 2014. In order to install a brake controller on your Sienna you will need a 4-way trailer wiring harness and a 4 to 7-way trailer wiring harness adapter. For the 4-way trailer wiring harness I recommend the T-One Vehicle...
  view full answer...


• Recommended Hitch and Wiring for 2019 Toyota Sienna XLE
• I recommend using the Curt # C13343 which is a Class III hitch that offers a concealed cross tube for a clean looking installation that keeps the hitch mostly hidden. I really prefer the Curt hitches because of the durable powder coating they have which helps keep your hitch from getting dinged up and rusted over time. For wiring, I recommend using the Tekonsha T-One Wiring Harness # 118648 since we've found that the Tekonsha converter boxes tend to be a bit more reliable over time. This...
  view full answer...


• Trailer Brake Controller & 7-Way Connector Installation on 2016 Toyota Sienna LE AWD
• Brake controller and 7-way socket installation in your 2016 Toyota Sienna LE AWD can be accomplished using our installation kit # ETBC7. This kit includes all parts to install a controller and have a functioning 7-way that carries lighting, trailer brake power and a 12V circuit for your trailer. If you do not have a 4-pole flat trailer harness on the Sienna you will also need one of those, part # 118648 from Tow Ready. For a controller I recommend the Prodigy P2 # 90885 for its easy set-up...
  view full answer...