If your camper trailer has a 7-Way you need part # 20142 but if it has a 4-Way or 5-Way flat connector then use part # C35FR instead. They both offer the same solution for your 2016 Land Rover LR4 it just depends on what you have on your trailer side. view full answer...
The kit you're looking for to add a Rhino Rack Pioneer Platform and Back Bone system to your 2016 Land Rover LR4 is available with part # RR83AB; this kit contains the Rhino Rack 52107F Pioneer Platform and RD4B1 Back Bone kit. These have been confirmed to fit your LR4.
You could also get a 56" wide platform with part # RR75TB and use the Rhino-Rack Backbone Mounting System for Pioneer Platform - Land Rover LR4 # RRRD4B1. view full answer...
The wiring adapter you need to install a Prodigy P3 trailer brake controller # 90195 in your 2011 Land Rover LR4 with tow package is item # 3035-P. view full answer...
If you have standard size axles that you are installing the Electric Trailer Brake Kit # AKEBRK-7-SA on then you can choose from the following options:
5,200 lb Axle - Kit # BK3-310 (Grease Seal 2.125" ID) or Kit # BK3-300 (Grease Seal 2.250" ID)
6,000 lb Axle - Kit # BK3-110 (Grease Seal 2.125" ID) or Kit # BK3-100 (Grease Seal 2.250" ID)
7,200 lb Axle - Kit # BK3-210 (Grease Seal 2.125" ID) or Kit # BK3-200 (Grease Seal 2.250" ID)
Since you do have an older Airstream Overlander you... view full answer...
Unfortunately we do not have any hubs that use those bearing numbers. Your options would be to remove your old spindle and install a new spindle such as # TRU24FR with compatible hub and drum such as # 84546UC3. You could also replace your entire axle with one such as # 35545E-ST-89, which is rated for 3,500 lbs and has electric brakes. In order to determine the correct axle you would need to measure from hub face to hub face and spring center to spring center like in the accompanying photo.... view full answer...