Photos do help identify your propane setup's requirements but since your Intech A-frame toy hauler appears to use a standard 20-lb propane tank you will probably be fine using Automatic Changeover 2-Stage Propane Regulator # CAM59005 along with your second tank. It automatically switches to the full tank when the other is empty, and you can remove the empty cylinder without interrupting propane supply. Please refer to the linked video for more on this item.
You may also be interested in... view full answer...
As we carry a large variety of propane accessories, I have everything you will need for your setup.
For a single stage regulator with built in hose for acme fitting and quick disconnect valve, I recommend using the Camco Propane Hose w/ Shut-Off Valve - Female Quick-Connect x ACME part # CAM57629 as this has everything you need in a preassembled ready to use kit. In order to attach this kit to your burner, you will also need the MB Sturgis RV Quick-Connect Propane Grill Hose part # 100304-60-MBS... view full answer...
It sounds like you are trying to connect your Champion generator to the quick disconnect propone outlet on your Airstream that is commonly used to connect propane accessories such as a grill or griddle, is this correct? If so, you will want to use part # 100304-120-MBS.
If you are wanting to connect directly to your propane tank, the best way to do that would be to simply unhook one of your propane lines at the tank and use part # CAM57703 to go from the tank to the generator. view full answer...
You'll need to get a 3/8" male flare union from your local hardware store. This will have a 3/8" male flare fitting on both sides and then you could use a hose like the Camco Low-Pressure LP Gas Regulator w/ 6' Long Hose # CAM57703, which has a built in regulator.
if you don't need a regulator then you can also get a 3/8" male flare to 1/4" female inverted flare fitting from your local hardware store and use a hose like the Propane Hose with Back Check # 37207-30795. view full answer...
We carry a wide range of propane accessory items including hoses and tees that can be seen on the linked page. In the margin are filters that allows you to select the type of connector. For a tee with dual female quick-disconnect ports you might consider part # 103537-MBS. view full answer...
To switch your 2022 Forest River R-Pod over to two propane tanks you'll need to start with the base. You can use the 20lb tank holder # 37220BL you were looking at or a 30lb tank holder # 37230BL. These can be bolted to the trailer tongue.
Once you have the holder in place and the tanks you can then install a dual-stage automatic changeover regulator like part # 37207-30395. You'll also want to pick up a mounting bracket # 37207-30405 to attach it to the tank holder. You can run pigtail... view full answer...
We might have something that will get you connected but we don't deal with many high pressure propane accessories so it's not exactly what you're trying to do. I also am not familiar with that burner but from what I can tell it has a flare fitting on it and comes with a hose from a Type 1 to that flare with a high-pressure regulator in-line. You should be able to use a POL to Type 1 adapter, part # 204128-MBS, to connect your existing hose to the 100 pound tank and the other end of the... view full answer...
Aside from the part number of the Jack-It 2 Bike Rack for A-Frame Trailers # LC429756, the only other part number mentioned is the cable lock CAB-10. This was rebranded as an etrailer cable lock and can be found now as part # e98891 on our site.
Some additional accessories we have for the Jack-It are the Bump-It # LC723359 adapter for a standard hitch receiver and the Straight Shank # LC67HD if you want to avoid having the bikes directly above your propane.
If you are looking for something... view full answer...
Go To Results