I have a great solution for you. Unfortunately, you do not carry custom-fitted mats for your 2019 Coachmen Leprechaun 260DS. However, I recommend the Hopkins Semi-Custom Auto Floor Mats - PVC - Front - Black # HM79140. The mats include double-layer heel guards on each mat helps minimize wear and tear. Since the floor mats are not a fully-customized kit, there may be some cutting required. view full answer...
Yes, The Timbren Front Suspension Enhancement System # TGMFK15A will work on your 2008 Chevrolet Express Van with camper body.
These springs have a 14,000 pound capacity, and will provide a more comfortable ride by absorbing road shock and improving roll stability. They are easy to install with no drilling required.
Using these springs will not affect the empty ride of your vehicle.
I attached a review video link below. view full answer...
First you will need to locate the brake controller wires in your 2022 Chevrolet Express van. One you have located the wires you will need to use a Test Light # PTW2993 to verify that the wiring is functioning properly. You should have a power wire, brake switch signal wire, ground wire and a wire going to the 7-way at the back of the vehicle. With all these functioning properly you will be able to connect a Tekonsha Prodigy P3 Trailer Brake Controller # 90195. If they are not functioning... view full answer...
The AirBedz Rear Seat Air Mattress w Portable 12V Pump # 341033 was designed specifically to work with the rear back seat area on your 2016 Chevrolet Express 2500 and will not work with the front seats on your vehicle.
This product measures 55" long x 35-1/2" wide x 17-3/4" tall, takes approximately 2 minutes to install, and has an 800-lbs weight capacity.
Attached is a review video for you to check out as well. view full answer...
There are several items needed to flat tow your 2017 Jeep Wrangler Unlimited behind an RV: base plates, a tow bar, safety cables, lighting, and supplemental braking.
For base plates you can use the Roadmaster base plates # RM-521448-4. Please note the base plates do not fit Hard Rock or 75th Anniversary models. I have linked a video showing an example installation for you.
For a compatible tow bar you can use the popular Falcon 2, # RM-520. I have linked a video review of this tow bar... view full answer...
I do show that the Hollywood Racks 2 Bike Rack # HR200Z is compatible with use on motorhomes.
Some bike racks are not made to withstand the extra stress associated with bouncing on the back of an RV, but that is not the case here, so you will not have any issue using the # HR200Z on your motorhome.
For your question regarding the hitch adapter; I have confirmed with Hollywood Racks that the Replacement Hitch Adapter Sleeve # HRREDADA will work for your rack. I have attached a demonstration... view full answer...
For the best braking experience on your 2008 Chevrolet Express you want a proportional controller. There isn't a delay in the braking like there is with a time-delayed controller and a proportional applies the brakes with the same intensity the van is slowing down so it reduces the amount of wear and tear on the brakes themselves. However, they do cost a little more.
The best bang for your buck for a proportional controller is the Primus IQ # TK90160. I've linked an install on a 2014... view full answer...
For the front and rear anti-sway bars that fit your 2008 Chevy Express 3500 Cutaway Chassis you will need the following:
Front - # RM-1109-149
Rear - # RM-1109-175 view full answer...
I can definitely get you set up with an electric brake controller and 7-way for your 2017 Chevrolet Express 2500 Van. If you do not already have a 4-way connector at the back of your van then you will need to start there. The 4-way is what will be adapted in order to get a 7-way connector. If you don't already have a 4-way I recommend the T-One Vehicle Wiring Harness # 118392. This will provide you with a 4-way connector and plugs into your vehicle's wiring harness, which is located behind... view full answer...
The Draw-Tite Max-Frame Trailer Hitch Receiver # 75189 is confirmed to fit your 1997 Chevrolet Express Van.
Since it sounds like you don't have the factory tow package you will want to go with the Curt T-Connector # C55335 for wiring. If your Van happened to have the factory tow package then you will use part # 118240 instead. If you just need the 4-Pole connector then I recommend also installing the Mounting Bracket 4-Pole Flat # 18144 along with the No-Drill Bracket # C57202 for a quick... view full answer...
To install the Hayes Engage Trailer Brake Controller # HA81760 on your 2020 Chevrolet Express Van you will need the Wiring Adapter # HA81789-HBC. If your van included the 7-way wiring you will need to check for the wiring taped and tucked under the driver side floor mat up towards the firewall. If you can not find the wiring here you may also have the blue output brake wire already ran from the back to the front. It is located under the dash near the emergency brake pedal.
If your Express... view full answer...
Thanks for the picture! To attach the Rhino-Rack Pioneer Platform Roof Tray item # RR85TB you purchased to Rhino-Rack RTC-Style Roof Rack Tracks item # RTC18 you will need the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 item # RRRLT600. The quick mount legs let you mount 2 Vortex Aero crossbars to RTC style roof rack tracks. view full answer...
There are no brake controller plug and play options on the 2011 Chevrolet Express Van, but a brake controller installation will be fairly simple if your van has the factory tow package with 7-way trailer connector.
If your van has the factory tow package, there will be a bundle of 4 or 5 wires under the dash for a brake controller. They will be wrapped with a white tag that indicates the function of each wire. The wires are cut off, so you will just need a universal brake controller harness... view full answer...
Your bus started off life as a cutaway van chassis, then it was shipped to an upfitter that installed the bus body on it. There are many different upfitters out there and most of the bus bodies are different enough that one hitch won't fit all.
In order to determine which one you'll need, you'll need to take a measurement to determine the required drop. Measure the vertical distance from the underside of the frame member to the underside of the bumper at its lowest. You'll need to choose... view full answer...
If your 2013 Chevrolet Express 2500 passenger van did not leave the factory with a factory tow package it will not have everything needed to connect a 7-Way # A10-7072VP. With you mentioning the connector only having 6 connector this tells me it is not for a 7-way and is used for something else.
To install a 7-way you will need the 4-way # 118392 along with a 7-Way Install Kit # ETBC7. I have linked 2 installation videos below for the 4-way and 7-way. The 7-way video does show the installation... view full answer...
Thanks for all of the info! We have exactly what you're looking for!
To have more than 1 camera paired to a Furrion monitor you need the 5" Monitor Kit # FOS05TASF and an additional Vision S Camera # FCN48TASF (as both monitor kits come with an initial camera). Just install one camera on your 2020 Grand Design 3000QB and the other on your 2012 Chevy Express Van and then you can move the monitor to whichever vehicle you are operating (if you use a different vehicle to tow your Grand Design).
Furrion... view full answer...
Yes, you can use the Curt Echo Wireless Brake Controller - 7-Way Plug Mount w/ Bluetooth App # C51180 which plugs into your existing 7 way and provides your truck and trailer with trailer braking capabilities.
To control or adjust your braking, you'd just need to download the OneControl app from your app store and you'll be all set.
If you're looking for an adapter that lets you use the 4 pole and the 7 way at the same time then you unfortunately are not going to be able to because manufacturers... view full answer...
For your 2019 Chevy Express Van I recommend going with the Tekonsha Prodigy P3 # 90195 brake controller. This is a great brake controller that applies the brakes on your trailer at the same time and with the same intensity as the brakes on your van. The LCD screen is also a great feature that makes operation much easier than many other similar controllers.
The wiring part will vary depending on what you already have installed on your vehicle. If your Express Van came with a 7-Way then... view full answer...
What you're going to need is a light kit like # 20174, and a 4 pole to 7 way round adapter # 47405. Simply plug the 4 pole trailer connector from the lights into the adapter, and then plug the adapter into your 7 way round connector on your 2006 Chevrolet Express.
The harness on the light kit # 20174 is 6' long, and the off-set Y-harness is 3' long, which should be plenty long for you. view full answer...
The 2002 Chevy Silverado and 1999 Chevy Express van require different base plate sets so you would not be able to use the ones off of the Silverado. For your 1999 Chevy Express Van you would need # 3106-3 for a 1500 series or # 3106-1 for a 2500 or 3500 series.
Either set will be compatible with your Blackhawk tow bar. For safety cables you can use # RM-653.
For lighting I recommend a simple magnetic kit # RM-2120 because with it you will not have to cut into the vehicle's tail light... view full answer...
Go To Results