The Firestone air compressors such as # F9377 can handle typical moisture like what might splash up from the road when driving in the rain. But it is not designed to be submerged under water. For something to be waterproof it has to be able to be submerged under water for a certain amount of time and not let any water in.
It will be perfectly fine under your truck so long as you aren't planning on driving into any deep bodies of water! That is why Firestone makes a mount bracket, # F2530,... view full answer...
The Westin Tube Steps mounting brackets are powder coated. They use the factory provided running board mounting holes in the rocker panels. I have checked the install instructions for the Dee-Zee and the Pilot Automotive Tube Steps offered for your vehicle, they all mount in the same manner. GM trucks use the body mount bolts as an attachment point, but Dodge uses the rocker panels.
Westin states that their tube steps have a 300 pound weight capacity, which should be plenty strong enough... view full answer...
The zippers on the AO Coolers Saddlebag Coolers for Bikes # AC43FR aren't waterproof so you'll need to make sure whatever you're transporting is safe from water damage. view full answer...
I believe you are talking about the weather seals that come with TruXedo Tonneau cover # TX246601. Unless they are damaged or the truck is in extereme weather conditions frequently they can last as long as the cover does. Should you need to replace them for any reason there is a 4-pack available, # TX1703568.
The warranty would cover them if they were defective but it is a part that can wear out. the warranty specifically states:
"TruXedo, Inc. warrants that all new, unused products... view full answer...
The Derale Snap-In Radiator Adapter Fitting for GM # D13035 you reference is in fact made of aluminum, and is just as strong and resistant to heat as before. view full answer...
To tell if your vehicle has LED lights or incandescent lights, you really need to look at the light bulb itself as the outside lenses can be deceiving. Incandescent lights have a bulb with a filament like # VX-SDH11 where you see the wires making a connection on the inside. An LED light has what looks like a computer chip with a diode or many diodes that are circular like # DI85VR. view full answer...
The exterior of the MagnaFlow Ceramic Catalytic Converter part # MF93219 is made entirely of 409 stainless steel. The only part of the converter that is not stainless steel is the honeycomb core. view full answer...
Each of our 10 Inch lube plates for fifth wheel hitches are made from nylon, which is going to just as good a job as the graphite lube plates so you don't have to use any grease. The 10 inch lube plates we offer are:
- Curt 10" Fifth Wheel Trailer Hitch Lube Plate # 16721
- Lube Plate for Reese 5th Wheel Trailer Hitches - 10" Diameter # RP83002
I have added links to video reviews of each of these lube plates for you to check out. view full answer...
The # 337PM25812 pintle mount is manufactured in the USA, according to Buyers Products.
If you click the provided link, you can see a product description video featuring the # 337PM25812 pintle mount. view full answer...
The Curt jack part # C28304 is made in China.
We do have a similar rated and style jack, the Dutton-Lainson part # DL22683, that is made here in the US. This jack has the same 2,000 pound capacity and 15 inches of lift. It's also a weld on jack that swivels just like the Curt. view full answer...
The Yakima HoldUp 4 Bike Rack - Platform Style - Tilting - 2" Hitches # Y02443-2 has a weight of 98 lbs without bikes on it. The two parts weigh 49 lbs each so you can use the HoldUp2 bike alone at that weight or add the additional 2 bikes at 49 lbs additional carrier weight.
When combined the rack has a total weight capacity of 200 lbs total with an individual bike weight maximum of 60 lbs.
With all the packaging the shipping weight is 114 lbs. view full answer...
You should have no problem using the Convert-A-Ball Gooseneck Coupler Adapter, # CAB-C5G, on a 1,200 mile trip as long as the gross weight of your trailer remains under 20,000 lbs and the pin weight is under 4,000 lbs. We had one customer comment that he has been using his adapter for over 20,000 miles and it is still working great.
The only note I would add to this adapter is that there will be a noticeable difference in the ride quality if you are used to towing with a fifth wheel hitch.... view full answer...
The Westin Perfect Match Series Rear Step Bumper, # 31012, is only available in the chrome-plated version. steel. The top has black textured step pads. The bottom sections you see on either side of the center step are plastic. This is an OEM replacement so it is constructed just like the factory bumpers. view full answer...
The Westin custom-fit bumper # 31012 is built to factory specifications to match your 1998 Dodge Dakota (fits all models but it won't be the exact bumper it came with originally.
The bumper # 31012 is chrome with black steps.
The step pads are a molded polymer plastic which creates a non-slip surface. As a result, provides you solid grip when you get in or out of your vehicle.
Mounting hardware is included as it's a quick and easy bolt-on installation. view full answer...
We do offer a USA-made hitch ball with specs similar to the one you referenced.
B and W offers their 2-5/16-inch hitch ball # BWHB94004. This has a gross weight capacity of 30,000-lbs, a 1-1/4-inch diameter shank that is 2-1/2-inches long, a fine thread pitch (12 TPI) and includes the lock washer and nut. All heat-treated parts have a raw finish. view full answer...
The wire in the Jacketed 2 Wire, 10 Gauge, Brake Wire, item # 10-2-1, is stranded, and designed for automotive applications. The temperature rating on the coating is 221 degrees Fahrenheit. This allows for use of the wire for up to 40 amps at up to 25 feet.
This is the wire we use to wire the brake output wire and the 12 volt power wire when installing the Brake Controller 7 & 4 Way Installation Kit, item # ETBC7, and a brake controller on vehicles that do not have an existing 7-way connector... view full answer...
I may have a solution for you if you're looking for a Pintle mount that is Made in the USA, but the Buyers Products 2" Pintle Hook Mount - 1 Position - 9" Shank # 337PM84 is manufactured overseas. However, B&W makes all of their products in the USA so you may want to have a look at the B&W Pintle Hook Mounting Plate for 2" Hitches - 9" Shank - 6 Hole - 16,000 lbs # BWPMHD14001, which is similar to the # 337PM84.
I've also linked our entire selection of B&W Pintle hook mounts that you... view full answer...
Go To Results