You will need to use a circuit tester like # PTW2979 to find a wire in your 2015 Toyota Prius v that is hot only when you use your key (ignition switched power). When you do that you can simply wire in the Battery Isolation Solenoid # PK5231201, which should be wired like in the accompanying diagram with 10 gauge wire # 10-1-1.
I have added a link to a video review of the solenoid for you to check out. view full answer...
I'll be happy to help you out with the installation of the Inno parts (listed below) on your 2014 Toyota Prius v:
42" Aero Crossbars - # INXB108-2
Flush Feet - # INXS200
Fit Kit - # INK870
For the front crossbar you will space the feet out at 20-1/2" and position the feet 2" in front of the door edge like you mentioned.
For the rear crossbar you will space the feet out 20-3/4" and position the feet 25-1/2" back from the door edge.
Attached is a snapshot of these specs out of the installation... view full answer...
Because your 2016 Prius has that spoiler what I recommend is to use the Curt strap # 18050 with passive security strap # TH533. The way this will work is you will open the rear hatch and feed the loop end of the strap between the hatch and the roof from the inside out. Pull it through until the disc part of the strap is all the way up.
Close the hatch and use the Curt strap to attach to the passive security strap. You can hook the Curt strap to the loop and it won't fall off as long as... view full answer...
Go To Results