If you're installing the Advent Air RV Air Conditioner System # ADV94FR as a second unit that's completely separate you'd most likely only need to purchase some wiring to go from the controller to wherever you plan on mounting the thermostat and just some electrical connectors to complete your connections. If the space doesn't have AC wiring ran to it then you would also have to run the wire and install a circuit breaker in your power center in order to power the system.
You wouldn't... view full answer...
With 6-pole wiring such as the Pollack plug # PK11604 that you referenced the turn and stop signals are combined together the same way they are with 4-pole and 7-way wiring. There is one pin/circuit for the left side of the trailer and one for the right as shown in the linked diagram.
If you want to separate out the stop light from the combined turn/stop signal you can use a converter # 118158 which takes in the combined signals for both sides of the trailer and outputs separate left and... view full answer...
Go To Results