Expert Answers about Honda Civic

• How To Install Curt Trailer Hitch Receiver On a 2020 Honda Civic
• The Curt Trailer Hitch Receiver part # C92UR is a great option and a confirmed fit for a 2020 Honda Civic. I know you said you were looking for an install video on a 2020 model, but we don't have one at this time. It will be displayed on the product page when available. That said, the installation video we do have on a 2019 model will be the exact same as a 2020 model so you can use this for help as well as the installation instructions which are both attached below. Please note, there...
  view full answer...


• Evo Clamp Feet Placement for Thule Roof Rack Installation on a 2017 Honda Civic Sedan
• You want the front legs to be 9" back from the front windshield on your 2017 Honda Civic Sedan and then the rear legs will be 29-1/2" further back from the front legs, but it will be easier to measure from the front edges of the front and rear crossbars as opposed to the fronts of the legs. These measurements are actually found in the fit kit instructions as opposed to the Evo Clamp Legs instructions (see first attached photo). You'll also reference the fit kit instructions for leg placement...
  view full answer...


• Instructions for Installation of a Trailer Wiring Harness on a 2003 Honda Civic 4 door DX
• The wiring harness you have selected will work with your vehicle. This T-connector plugs directly into existing wiring, so it is super easy to install. The powered converter reduces strain on wiring system and is made using SMT to ensure superior performance. I have attached a review video for you to check out.
  view full answer...


• Install Video for Trailer Hitch on a 2013 Honda Civic
• For the Curt Hitch part # C11391 that has been confirmed as a fit for your 2013 Honda Civic we have an install video that shows it being installed on a 2013 for you. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Swagman XTC2 Bike Rack part # S64670. This rack has a ton of positive reviews from our customers who have tried it. You will also need the support strap #18050 when using the Curt hitch for unsupported loads like bike racks and cargo carriers....
  view full answer...


• Why Does Bumper Beam of 2019 Honda Civic Need to be Trimmed to Install Curt Trailer Hitch
• Since the Curt hitch part # C92UR for your 2019 Honda Civic fits between the bumper beam and the rear frame area of your vehicle it adds a bit of length to the bumper beam assembly. By that I mean the bumper beam sticks out further due to the bracket width of the hitch. So, a corner of the bracket has to be taken off so that the bumper cover can fit over the beam without interference. I have attached the installation instructions and a video of the install for you to see the installation...
  view full answer...


• Installation for 2017 Honda Civic Thule Roof Rack
• This distance will be determined by the specific manufacturer and bar kit that you purchased for your 2017 Honda Civic Hatchback. In general, its easier to complete installation of the front bar set first, then proceed to the rear set. For both the Square and WingBars, you will want to install the front fit pack at 10-7/8 inches behind the windshield. Then, you will want the second set of fit kit parts to be at 26 inches behind the center of the first set. I've included the diagram...
  view full answer...


• Does Curt Trailer Hitch Receiver C11209 Attach Directly to Frame or Over Rear Fascia
• All of the mounting surfaces of the Curt hitch part # C11209 are designed for direct contact with metal. You would not attach this to the vehicle with plastic between the hitch and the frame.
  view full answer...


• Does Muffler Need To Be Removed For Installation of Curt Trailer Hitch on 2005 Honda Civic
• The installation of the Curt Trailer Hitch Receiver, part # C11204, you referenced does not require the removal of the muffler. This install has 5 steps that I have listed here: 1)General fit: This hitch mounts to the car's central tow loop under the bumper and to existing holes in the left and right frame rails. 2) Hold the hitch in position at tow loop and the frame rails to identify the correct frame mounting holes. Fishwire 7/16" carriage bolts with CM-SP108 spacers into position...
  view full answer...


• Does the Bumper Need To Be Removed To Install the EcoHitch on a 2015 Honda Civic Sedan
• The EcoHitch Hidden Trailer Hitch Receiver part # 306-X7235 is a confirmed fit for a 2015 Honda Civic Sedan. It does not require removal of the rear bumper fascia, just an underbody panel. I have emailed you a copy of the instructions as well.
  view full answer...


• Tips for Routing a Trailer Wiring Harness Power Wire on a 2015 Honda Civic
• The rear seats in your 2015 Honda Civic likely fold down so I would route the wiring harness power wire up behind the left rear seat then tuck it beneath any paneling/trim, under the threshold plate at the floor of the doorway, behind the trim of the B-pillar between the front and rear seats, under the front door threshold, behind the driver's side kick panel, and through the firewall into the engine compartment. To keep the wire hidden it will likely have to take a lot of twists and turns...
  view full answer...


• Installation of Trailer Hitch for a 2015 Honda Civic EX-L
• Your 2015 Honda Civic EX-L falls into the category of "excluding Si" models which the Curt # C11391 is designed to fit. It's important to know that with this trailer hitch you will need to use a stabilization strap # 18050 for any non-trailer load, bike rack or cargo carrier etc, per Curt's warranty. We are limited to the vehicle's our customer's bring to us to have installations done so we do not have an installation video or pictures of this hitch being installed on your specific model....
  view full answer...


• Installation Details for Curt Class I Hitch # C11204 on 2005 Honda Civic 4 door
• You are correct, the spacer block and bolt will need to be fished through the frame. I have linked you to a video that explains this technique. If you need to lower the exhaust a bit in order to access the mounting holes, I have linked you to a video showing how this is done. Simply spray the rubber isolator and mounts with a spray lubricant like WD-40 and slide the mount out of the isolator. I have also linked you to the hitch installation instructions, as well as to an FAQ article...
  view full answer...


• How to Secure Kayak to Malone EcoLight Trailer # MAL53FR When Using a Hobie Style Carrier
• The best way to secure your kayak to your Malone EcoLight Trailer # MAL53FR when utilizing the Hobie Style Carriers and Hardware # MPG5576-6 is to use a ratchet strap that has loops on both ends (see attached picture). We do have some available on our site like the Malone # 297-7RSBB for one, # 297-9RSDB for two, or # 297-7RSBB-M for four. I have attached a review video for you to check out. You could also add the Malone J-Pro2 Kayak Carrier with Tie-Downs - J-Style - Fixed Arms - Side...
  view full answer...


• Manual Replacement Mirrors for 2002 Honda Civic DX Sedan
• The K-Source Replacement Side Mirror - Manual Remote - Black - Driver Side # KS63552H and the K-Source Replacement Side Mirror - Manual Remote - Black - Passenger Side # KS63551H(Passenger Side) are not electric so your 2002 Honda Civic DX Sedan may have a manual control stick inside the car that will allow you to adjust the mirror face. This is what you would need in order to adjust the face as opposed to a button, which I am assuming is for electric mirrors.
  view full answer...


• Do You Need to Re-Install an Underbody Panel When Installing Curt Hitch # C11391 on 2013 Honda Civic
• There are a couple of reasons why the video of the 2013 Acura did not show the re-installation of the base body panel. First, the customer may not have wanted it re-installed and secondly, the installers may have trimmed it up and re-installed, however chose not to include that section in the video. In the installation directions for Curt hitch # C11391, listed under the installation directions, step # 6 states to re-attach trimmed underbody panel using existing fasteners.
  view full answer...


• Can Hollywood Racks Express 3 Bike Carrier # HRE3 Carry BMW Bikes
• Yes the Hollywood Racks Express 3 Bike Carrier # HRE3 will easily work with standard BMX bikes.
  view full answer...


• How To Install a Trailer Hitch On a 2019 Honda Civic Si With Center Exhaust
• Even though it is not a fit for it, it is not impossible to install the # C92UR Trailer Hitch Receiver on a 2019 Honda Civic Si. However, in order to do this, you will need to remove the center mounted exhaust pipe. I have attached a few photos for you of a customer who completed the above task. That said, I could give you some dimensions if you let me know exactly what ones you need but trailer hitch manufactures will not release full dimensional drawing for proprietary reasons. Customer...
  view full answer...


• Will Blue Ox Base Plate for 2021 Honda Civic Cause Cooling Issues
• Sometimes there are pieces of the vehicle that get left off when installing a base plate kit like the # BX2265 just due to fact they occupy space on the front of the vehicle where space is tight. What we've found with this base plate kit is that there is no effect on cooling power with the shielding removed. We've sold quite a few of these base plate kits to people who have put quite a few miles on the vehicle without any reported issue so I would not anticipate any problems even in your...
  view full answer...


• Installation of Curt Class I 1-1/4 Inch Hitch # C11391 on 2012 Honda Civic Si Coupe
• According to the installation instructions on Curt Class I 1-1/4 Inch Hitch, part # C11391, for your 2012 Honda Civic Si Coupe, the lower part of the under body panel may need to be lowered to access the heat shield fasteners. The heat shield will need to be trimmed for hitch clearance, but the under body panel does not need to be trimmed. After trimming the heat shield and reinstalling, then you will raise and reattach the under body panel before installing the hitch to the vehicle. I...
  view full answer...


• Does Saris Bones RS 3 Bike Rack Fit 2011 Honda Civic EX
• I checked with Saris and the Bones # SA805BL is a confirmed fit for your 2011 Honda Civic Sedan EX. Saris does not offer fit measurements but they do say to place the lower arms on the bumper.
  view full answer...