To wire your 1996 Intrepid you will need an Upgraded Circuit Protected Taillight Converter Hardwire Kit with 4 Pole End (Includes Testers), item # 119178KIT. Use the circuit tester, included in the kit, to hard wire the converter in behind the vehicle taillights. Once this is completed you can use the Brake Controller 7 & 4 Way Installation Kit, item # ETBC7, to complete the 7-way wiring.
The four extra wires on the ETBC7 will be wired as follows, white will go to a suitable ground, blue... view full answer...
Go To Results