On your 2017 Toyota Highlander Limited Platinum with panoramic sunroof, the Rhino-Rack roof rack consisting of # RRVA126B-2, # RRRCH4, and # RRRCP37-BK will allow the sunroof to function if there is not direct contact with the rails or mounts of equipment on the rack crossbars. You may need to adjust the crossbar spread to accomodate. It is not recommended to use the sunroof at the same time as using the roof rack even if there isn't direct contact. view full answer...
Yes, the etrailer Trailer Hitch Receiver - Custom Fit - Class III - 2" # e75ZR will fit your 2021 Toyota Highlander, and is designed to fit all models of the Toyota Highlander model years 2020 and up. It will also allow you to keep your full-size spare as long as it is not on the aluminum rim. The aluminum rim is to wide. view full answer...
Yes, the Thule SquareBar Evo Crossbars - Steel - 43" Long - Qty 2, part # TH712100, will work with the old Thule Crossroad feet. Old Thule feet work the new square bars but the opposite is not true. The new Thule feet will not work with the old square crossbars.
I have included a video demo about the Thule SquareBar Evo Crossbars below. view full answer...
As far as trailer hitch # 13530 it will indeed fit both a 2006 Toyota Highlander and Highlander Hybrid. I have linked a video showing a typical installation and the instructions for you.
If you plan on doing some towing I recommend the etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a storage bag.
For trailer wiring, the option you'd use will depend on how your Highlander is equipped:
• For a non-hybrid without the tow package, use... view full answer...
1) You would need to go by the useable space on the carrier. The useable space on the Thule SnowPack Extender Ski and Snowboard Carrier # TH7325 is 29-1/2 inches. Provided that the overall width of the adult board, stacked kid's boards, and skis does not exceed that 29-1/2 inches you will be able to carry all of them.
2) The useable length of another Thule SnowPack Ski and Snowboard Carrier # TH7326 is a little more at 30-1/2 inches if the first Thule is not long enough.
3) Yes, we now... view full answer...
What you are likely seeing for the 30 amp circuit is for the 12 volt hot lead for a 7-Way trailer connector. The 10 amp fuse for Curt trailer wiring harness # C56217 applies only to the trailer lights and no other functions. Most OEM systems use a 30 amp circuit for the 12 volt hot lead in a 7-Way but the ratings for the circuits related to the lights will be much lower.
You would not use a higher rated fuse with the Curt harness because it would allow a short to overdraw the converter... view full answer...
Yes, the etrailer Trailer Hitch Receiver # e98857 fits the following:
2004 - 2005 Toyota Highlander
2006 - 2007 Toyota Highlander excluding Hybrid
2006 - 2007 Toyota Highlander Hybrid
2004 - 2006 Lexus RX 330
2007 - 2009 Lexus RX 350
2006 - 2008 Lexus RX 400h
I've attached a few installation videos to this as well in case the person you sell it to has one of these vehicles. view full answer...
You should have no problem storing the spare tire on your 2012 Toyota Highlander provided you are using the factory spare and not a larger size. I have provided a link to the installation instructions for the Draw-Tite Max-E Loader Trailer Hitch # 75726 that provides information on your specific concern. Just know that when you are storing the spare or a flat tire, you will need to lift up on the rear edge of the tire in order to clear the hitch.
I have also included a link to a video... view full answer...
Yes the Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers part # CC-275 will work with your 4' square bumper. It has mounting brackets that are 8" tall x 4-3/4" wide x 2" deep giving you a great fit. view full answer...
I checked directly with EcoHitch for you, and the Hands-Free Liftgate on your 2021 Toyota Highlander will not be affected by the hitch after it is installed so you will be able to use it as normal. The correct fit for your '21 Highlander is the following:
- EcoHitch Hidden Trailer Hitch Receiver # EH35VR
This will give you a hitch that not only will not affect the function of your liftgate, but also help keep the aesthetic of your Highlander because of its concealed crosstube so only... view full answer...
Yes, there is a brake controller that will work on both a 2016 Toyota Highlander and a 2010 Toyota Tacoma. It is the Curt Echo item # C51180. The Curt Echo attaches to your vehicles 7-way connector. It is a proportional brake controller that activates your trailer's brakes when your vehicle decelerates. The Echo is unique in that it does not require you to hardwire it into your vehicle. It is controlled by an app on your cell phone. This makes it extremely versatile and you can move it... view full answer...
I have a great trunk-mount bike rack option for your 2013 Toyota Highlander with rear spoiler, the Hollywood Racks Over-the-Top 3 Bike Rack # HRF2-3. This bike rack is specially designed for vehicles with rear spoilers. The upper bar of the bike rack extends above the rear spoiler to allow the straps to hook at the top of the rear hatch, but not to put any weight of the spoiler.
The # HRF2-3 has the capcity to hold 3 bikes and has a weight capacity of 35 pounds per bike. If you only want... view full answer...
To attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898 to your 2021 Toyota Highlander you'll need a roof rack that has a T-Slot in the crossbars for the Hullavator to slide into.
Currently the only brand of roof racks we carry for your vehicle that are compatible with your flush mounted rails is Yakima. I recommend the following parts to complete your roof rack:
Yakima HD Crossbars - Aluminum - Black - 55" Long # Y01156
SkyLine Towers for Yakima Crossbars... view full answer...
Yes, the T-One Wiring Harness, # 118449, is the correct wiring harness for your 2008 Toyota Highlander. The portion of the harness that plugs in under the dash, see instructions, will convert the vehicles 3 wire system to a two wire system and the output end will plug in on the drivers side at the rear of the vehicle.
We have a video installation on a 2010 Highlander that should be very helpful, see link. view full answer...
Galvanized metal parts are definitely better if your application is salt water use. We do offer a galvanized hub/drum assembly in the 3500-lb axle rating and with the 5-on-4-1/2 bolt pattern you need. Hub/drum kit # 8-247-50UC3 includes the bearings (L68149 and L44649), races, grease seal, grease cap, and zinc-coated lug nuts. A review video is linked for you. view full answer...
Yes, Draw-Tite has confirmed that the Draw-Tite Max-E-Loader Trailer Hitch, # 75726, will fit both the 2011 and 2012 Toyota Highlander. I have attached the installation instructions for you to check out.
If you need a wiring harness to add to your new Highlander, then you will want to pick up the Tow Ready T-One Wiring Harness, # 118449. I have attached an installation video of this wiring harness on a similar vehicle for you as well.
You can also order a new hardware kit for this hitch... view full answer...
From my research the factory tow package available on the 2018 Toyota Highlander includes a trailer hitch receiver and 4-way trailer connector to power a trailer's lights.
The trailer hitch I recommend is the EcoHitch, part # 306-X7250. I like that the hitch's cross tube is hidden behind the rear bumper and out of site. The only downside to this hitch is that it isn't rated for weight distribution. If you're going to be using a weight distribution system to tow a trailer then I recommend... view full answer...
We do have the exact trailer hitch receiver you need for your 2007 Toyota Highlander so you can install the Rhino-Rack T-Load Hitch Mounted Load Assist and Support Bar for 2" Hitches # RTL002.
The correct hitch for your '07 Highlander for the Load Assist is the etrailer Trailer Hitch Receiver # e98857.
This is a Class III 2" hitch that will allow you to easily mount the Rhino-Rack T-Load. The T-Load does come with everything you need in order to use it, though in order to lock it you... view full answer...
In regards to installing the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195 on a 2021 Toyota Highlander you will first need the Pigtail Wiring Harness with Diode for Tekonsha and Draw-Tite Brake Controllers part # 7865. Then you'll find a place to mount the controller. I have attached a video to show where I mounted the controller. It must be right-side up and not on its side. view full answer...
If your trailer has a straight tongue, like a boat or kayak trailer, then you might have enough room under your bikes to be able to use the Malone Runway Trunk Bike Rack # MPG2142 on your 2016 Toyota Highlander while also towing, but there are variables that I can't really address; like how tall are your bikes, where exactly the rack arms sit in regards to the height of your hitch receiver, and if your trailer coupler height needs a straight ball mount or one that has a drop or rise.
Because... view full answer...
Go To Results