The WeatherTech Side Window Air Deflectors with Dark Tinting part # WT82472 install in the channel of your 2017 Subaru WRX doors. They also come with a limited lifetime warranty.
I have attached an installation of these deflectors installed on a similar vehicle for you in addition to a set of written instructions. view full answer...
Yes the Curt Bike Rack part # C18065 will fit and work great in the EcoHitch that fits your 2020 Subaru WRX part # 306-X7257.
There is enough clearance between the hitch pin hole and the back of the hitch/trunk pan for the rack to fit. view full answer...
The EcoHitch Invisi Trailer Hitch Receiver part # 306-X7257 is a 2" x 2" receiver tune opening. While we do not sell the 1UP from what I have seen of them they come in the 2" x 2" variety. If your is 2" compatible it will work out great for you. The only thing to be sure of is that you will need to have less than 2.5" of shank behind the pin hole on your rack for the holes to line up. view full answer...
I checked with Curt and trailer hitch # C11408 is indeed listed as a fit for your 2016 Subaru WRX Limited. There is one picture from the instructions which I have added for you. I have also linked the instructions. You will not have to remove the bumper to install the hitch.
If you plan on doing some towing the correct ball mount is # C45521. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. And for trailer wiring you can use # C56259 to add a 4-Way flat connector.
If... view full answer...
There sure are custom fit floor mats from WeatherTech that fit your 2018 Subaru WRX, and I'll go over the options for you.
Front Floor Mats are available in the following colors:
Black: # WT441661
Gray: # WT461661
Tan: # WT451661
Second Row Floor Mats are also available in those colors, though please keep in mind they will not fit in models with optional Audio Package 2 sub-woofer under driver's seat. The Second Row Floor Mat options are:
Black: # WT441662
Gray: # WT461662
Tan: # WT451662
If... view full answer...
The EcoHitch Invisi Trailer Hitch Receiver, part # 306-X7257, has a distance from the center of the hitch pin hole to the outside edge of the receiver of 1-1/8". This is not enough to use the Thule EasyFold XT, part # TH903202, or any other Thule bike rack.
Instead, I recommend using the Kuat NV 2.0 2-Bike Platform Rack, part # BA22B. It can hold two bikes up to 60 pounds each. It is a wheel-mount rack that has keyed-alike locks. I've linked to a video review of this below. view full answer...
The Yakima JetStream Crossbar System part # Y00425, part # Y53TR, and part # Y00248 is a great option for a 2020 Subaru WRX and it will work on models with a sunroof. That said, you need to be mindful when using the sunroof with the roof rack attached as you will have a reduced overhead clearance with the rack installed but there are no other issues aside from this according to Yakima. It does mount in the factory fixed points. view full answer...
While Thule has not tested the fit of their 38" AirScreen XT # TH72WV on your 2021 Subaru WRX with the factory crossbars, the fairing is universal in that it uses straps to secure to the crossbars. It also has individual adjustment knobs that allow you to customize to fit to your roof. The fairing is compatible with aero-style bars that are no more than 3-1/4" long x 1-1/8" tall so this may help you to determine if they will fit your OEM crossbars.
It looks like their 44" AirScreen XT... view full answer...
For your application with the EcoHitch # 306-X7257 I recommend using the Hollywood Racks Road Runner 5 Bike Carrier # HR520.
This isn't a platform rack and as such only weighs 37-1/2 lbs; the pin system on this is a standard locking pin which will be simple to install. Just make sure you install the pin prior to cranking down on the anti-rattle handle at the front.
Attached below is a video review for you to check out. view full answer...
We do have an option for a flush-mounted roof rack that fits your 2018 Subaru WRX, and I recommend going with the Rhino-Rack roof rack:
- Rhino-Rack ROC25 Roof Rack # RR37GR
The reason I like the Rhino-Rack is because it is the best overall value for a roof rack; you won't be losing out on quality or functionality, and you'll be getting it at a better price point. Essentially, what you get with Rhino-Rack is a strong, quiet roof rack without having to pay to have a certain brand name... view full answer...
The shipping weight of the EcoHitch Invisi Trailer Hitch Receiver - Custom Fit part # 306-X7257 is about 31 lbs. This hitch fits 2015 - 2019 Subaru WRX. It is a completely hidden design so the hitch is completely out of sight for a clean factory look on the WRX. I have attached a video for your reference. view full answer...
I do have a hitch pin lock that will work for you but unfortunately a Saris hitch pin lock will most likely not work for your Kuat Transfer, because the lock for the transfer screws into the bike rack not just into the hitch. The Anti-Rattle Hitch Lock for Kuat Transfer Bike Racks # HLT is going to be the hitch pin lock that is compatible with your Kuat Transfer bike rack. view full answer...
Yes, I checked with Thule and the Thule Canyon XT Roof Cargo Basket part # TH859XT is a confirmed fit for your 2013 Subaru WRX Hatchback. If you like, you can also add the Thule One-Key System Lock Cylinders part # TH450400 which will allow you to lock the basket to your vehicle or the Extension Piece part # TH8591XT to provide you with an additional 20" of space. view full answer...
The EcoHitch Invisi Trailer Hitch Receiver part # 306-X7257 weighs about 30 lbs. The good thing is the weight of the hitch itself does not count towards any weight capacities of your vehicle because it is attached to the frame. I have attached an installation video for your reference.
I recommend the EcoHitch because of it's 2" hitch receiver which is much more versatile when it comes to accessories like bike racks and cargo carriers. There are much more options for bike racks available... view full answer...
There is a high-quality option for a roof rack and roof-mounted bike rack for your 2022 Subaru WRX, but I checked with the manufacturers, and there are no trunk-mounted bike racks for your Subaru. So you'll need to go with a roof rack, and starting with the rack, the option that fit is from Thule, and consists of the following parts:
- Thule WingBar Evo Crossbars - Silver # TH711300 or Black # TH711320
- Evo Fixpoint Feet for Thule Evo Crossbars # TH49SC
- Fit Kit # TH88RE
When it comes... view full answer...
The biggest difference is fit; the Thule TopRide Roof Bike Rack # TH75JV fits bikes with a 9-mm quick-release skewer, 9-mm captive, 12-mm and 15-mm thru-axle, and 12-mm and 15-mm Boost thru-axle.
The Thule FastRide # TH95JV only fits bikes with a 9-mm captive or 9-mm quick-release skewer, and requires Thru-Axle Adapters # TH58BV to use the rack with 9-mm, 12-mm, or 15-mm thru-axle forks (both require Boost Thru-Axle Adapter # TH38BV for a 20-mm x 110-mm Boost thru-axle).
So really, the... view full answer...
The crossbars on your new 2018 Subaru WRX should be an AeroBlade Edge kit, like part # TH7062-TH7603. For any future accessories, you'll want to look for those that fit the Thule AeroBlade type bars.
In the case of the Prologue, you're right on in that the XAdapt 9 kit, part # THXADAPT9 is the correct kit to adjust the Prologue to working on the Thule AeroBlade bars. view full answer...
The correct fit kit to mount the (discontinued) Thule Rapid Traverse foot pack TH480R to your 2015 Subaru WRX is the discontinued part THKIT1649. Thule has been doing a complete remake of their products and so basically all of their roof rack and bike racks have been changed to a newer style that better accommodates newer vehicles. I reached out to my contact at Thule to see if the newer fit kit will work with the Rapid Traverse foot pack but he said that none of those parts are interchangeable.
Luckily... view full answer...
The Glacier Chains Snow Tire Chains # PW1038 are confirmed to fit the 245/40 R18 sized tires on your 2014 Subara STi. These are constructed of wire cross cables with spring rollers wrapped around them so they are considered spring style chains. They're also SAE Class S so they're designed for vehicles with little clearance for tire chains.
For rubber adjusters to make installation easier use # view full answer...
Not only is the size of the trailer hitch receiver important, but also the class is important. The Yakima Yakima HoldUp Bike Rack for 2 Bikes - 1-1/4" Hitches # Y02445 is only to be used on class 2 receivers so it will not work on your class 1 receiver. This is for a couple reasons, one being that class 1 receivers are not designed to hold the weight of some accessories, such as this class 2 bike rack. The second reason is that some hitch manufacturers actually weld in a stopper which blocks... view full answer...